首页 > FLM-1F-L

FLM-1F-L

更新时间：2024-10-29 22:59:11

品牌：MSYSTEM

描述：Space-saving Plug-in Signal Conditioners F-UNIT

PDF下载

中文翻译

PCB计价

概述
数据手册

如果您发现信息不准确，欢迎纠错

FLM-1F-L 概述

Space-saving Plug-in Signal Conditioners F-UNIT

FLM-1F-L 数据手册

通过下载FLM-1F-L数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载

MODEL: FLM

FW: -10 – +10 mA DC (Input resistance 100 Ω)

Space-saving Plug-in Signal Conditioners F-UNIT

Z: Specify current (See INPUT SPECIFICATIONS)

Voltage

LIMITER

(non-isolated)

1: 0 – 10 mV DC (Input resistance 10 kΩ min.)

15: 0 – 50 mV DC (Input resistance 10 kΩ min.)

16: 0 – 60 mV DC (Input resistance 10 kΩ min.)

2: 0 – 100 mV DC (Input resistance 100 kΩ min.)

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

4W: -10 – +10 V DC (Input resistance 1 MΩ min.)

5W: -5 – +5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

Functions & Features

• Preventing DC output signals from going above or below

preset values

• High and low limits independently adjustable over entire

range

• Monitor jacks provided for setpoint adjustments

• High-density mounting

Typical Applications

• Securing the minimum fuel flow in a combustion control

loop

[2] OUTPUT

Current

26 (1.02)

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

100

(3.94)

137

(5.39)

mm (inch)

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

4W: -10 – +10 V DC (Load resistance 10 kΩ min.)

5W: -5 – +5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

MODEL: FLM–[1][2]–[3][4]

ORDERING INFORMATION

• Code number: FLM-[1][2]-[3][4]

Specify a code from below for each of [1] through [4].

(e.g. FLM-6A-P/Q)

• Special input and output ranges (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

[3] POWER INPUT

AC Power

[1] INPUT

Current

K: 85 – 132 V AC

(Operational voltage range 85 – 132 V, 47 – 66 Hz)

L: 170 – 264 V AC

A: 4 – 20 mA DC (Input resistance 250 Ω)

A1: 4 – 20 mA DC (Input resistance 50 Ω)

B: 2 – 10 mA DC (Input resistance 500 Ω)

C: 1 – 5 mA DC (Input resistance 1000 Ω)

D: 0 – 20 mA DC (Input resistance 50 Ω)

E: 0 – 16 mA DC (Input resistance 62.5 Ω)

F: 0 – 10 mA DC (Input resistance 100 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 100 Ω)

J: 0 – 10 μA DC (Input resistance 1000 Ω)

K: 0 – 100 μA DC (Input resistance 1000 Ω)

GW: -1 – +1 mA DC (Input resistance 1000 Ω)

(Operational voltage range 170 – 264 V, 47 – 66 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

FLM SPECIFICATIONS

ES-1484 Rev.6 Page 1/4

http://www.m-system.co.jp/

MODEL: FLM

110 V approx. 20 mA

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail; Standard Rack Mounting

Frame BX-16H available

/C02: Polyurethane coating

/C03: Rubber coating

Weight: 200 g (0.44 lb)

TERMINAL SCREW MATERIAL

/S01: Stainless steel

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

GENERAL SPECIFICATIONS

Construction: Plug-in

Limit monitor accuracy: ± 0.25 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: ≤ 0.5 sec. (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength

Connection: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input or output to power

Power input code R:

Overrange output: Approx. -5 to +105 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

2000 V AC @ 1 minute (input or output or power to ground)

500 V AC @ 1 minute (I/O to power)

Power input code K, L, P:

Span adjustment: 95 to 105 % (front)

Limit adjustments: Multi-turn screwdriver adjustments

(front); 0 – 100 %; factory set to 0 % for low, 100 % for high

Monitor output: 0 – 10 V for 0 – 100 % limit

Monitor jacks: 2 mm (.08") dia.

2000 V AC @ 1 minute (input or output or power to ground)

1500 V AC @ 1 minute (I/O to power)

INPUT SPECIFICATIONS

■ DC Current:

Shunt resistor attached to the input terminals (0.5 W)

Specify input resistance value for code Z.

■ DC Voltage: -300 – +300 V DC

Minimum span: 3 mV

Offset: Max. 1.5 times span

Input resistance

Span 3 – 10 mV : ≥ 10 kΩ

Span 10 – 100 mV : ≥ 10 kΩ

Span 0.1 – 1 V : ≥ 100 kΩ

Span ≥ 1 V : ≥ 1 MΩ

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 15 V max.

■ DC Voltage: -10 – +12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 1 mA max.; at ≥ 0.5 V

INSTALLATION

Power input

•AC: Approx. 4.5 VA

•DC: 24 V approx. 70 mA

FLM SPECIFICATIONS

ES-1484 Rev.6 Page 2/4

http://www.m-system.co.jp/

MODEL: FLM

EXTERNAL VIEW

Hi Limit Monitor (+)

Lo Limit Monitor (+)

COM. (–)

Zero Adj.

Span Adj.

Hi Limit Adj.

Lo Limit Adj.

EXTERNAL DIMENSIONS unit: mm (inch)

CLAMP

(top & bottom)

7.8 (.31)

(.59)

DIN RAIL

35mm wide

2–4.5 (.18)

HOLE

15 (.59) deep

8–M3.5

SCREW

26 (1.02)

107 (4.21)

137 (5.39)

26 (1.02)

[3.3 (.13)]

•When mounting, no extra space is needed between units.

TERMINAL ASSIGNMENTS unit: mm (inch)

INPUT RESISTOR

(model: REM)

Input shunt resistor attached

for current input.

FLM SPECIFICATIONS

ES-1484 Rev.6 Page 3/4

http://www.m-system.co.jp/

MODEL: FLM

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

COM. HI

Low Drift

Amplifier

Hi / Lo

Limiter

Output

Driver

–

INPUT

OUTPUT

POWER

–

U(+)

V(–)

Base Socket

*Input shunt resistor attached for current input.

Specifications are subject to change without notice.

FLM SPECIFICATIONS

ES-1484 Rev.6 Page 4/4

http://www.m-system.co.jp/

FLM-1F-L 相关器件

型号	制造商	描述	价格	文档
FLM-1F-L/Q	MSYSTEM	Space-saving Plug-in Signal Conditioners F-UNIT	获取价格
FLM-1F-P	MSYSTEM	Space-saving Plug-in Signal Conditioners F-UNIT	获取价格
FLM-1F-P/Q	MSYSTEM	Space-saving Plug-in Signal Conditioners F-UNIT	获取价格
FLM-1F-R	MSYSTEM	Space-saving Plug-in Signal Conditioners F-UNIT	获取价格
FLM-1F-R/Q	MSYSTEM	Space-saving Plug-in Signal Conditioners F-UNIT	获取价格
FLM-1G-K	MSYSTEM	Space-saving Plug-in Signal Conditioners F-UNIT	获取价格
FLM-1G-K/Q	MSYSTEM	Space-saving Plug-in Signal Conditioners F-UNIT	获取价格
FLM-1G-L	MSYSTEM	Space-saving Plug-in Signal Conditioners F-UNIT	获取价格
FLM-1G-L/Q	MSYSTEM	Space-saving Plug-in Signal Conditioners F-UNIT	获取价格
FLM-1G-P	MSYSTEM	Space-saving Plug-in Signal Conditioners F-UNIT	获取价格