HPP-38-R/Q [MSYSTEM]

Space-saving Plug-in Signal Conditioners H-UNIT;


型号：	HPP-38-R/Q
厂家：	M-SYSTEM
描述：	Space-saving Plug-in Signal Conditioners H-UNIT
文件：	总3页 (文件大小：117K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: HPP

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

Space-saving Plug-in Signal Conditioners H-UNIT

[3] OPTIONS

blank: none

PULSE ISOLATOR

Functions & Features

/Q: With options (specify the specification)

• Galvanically isolating pulse rate signals

• Input frequency = output frequency

• Various outputs (open collector, voltage pulses and photo

MOSFET relay pulse)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

• High-density mounting

/C02: Polyurethane coating

Typical Applications

/C03: Rubber coating

• Isolating field pulse signals in order to reduce noises

• Changing e.g. dry contact signal to e.g. 5 V signals

TERMINAL SCREW MATERIAL

/S01: Stainless steel

26 (1.02)

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel (standard) or stainless

steel

(3.66)

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Frequency range: Input and output are the same.

Chattering protection: Filter provided for mechanical

contact input

137

(5.39)

mm (inch)

MODEL: HPP–[1][2]–R[3]

INPUT SPECIFICATIONS

Excitation: 12V DC ±2 V @ 30 mA; shortcircuit protection

■ Open Collector

ORDERING INFORMATION

• Code number: HPP–[1][2]–R[3]

Specify a code from below for each of [1] through [3].

(e.g. HPP-33-R/Q)

Maximum frequency: 10 kHz

Pulse width time requirement: 10 μsec. min. for ON and OFF

Sensing: Approx. 12 V DC @3 mA

ON/OFF level: ≤ 200 Ω / 0.6 V for ON, ≥ 100 kΩ / 6 V for OFF

■ Mechanical Contact

• Frequency range (e.g. 0 – 1000 Hz)

• Specify the specification for option code /Q

(e.g. /C01/S01)

Maximum frequency: 30 Hz

[1] INPUT

Pulse width time requirement: 10 msec. min. for ON and

OFF

1: Mechanical contact (max. 30 Hz)

2: Open collector (max. 10 kHz)

3: Voltage pulse (max. 10 kHz)

Sensing: Approx. 12 V DC @3 mA

ON/OFF level: ≤ 200 Ω / 0.6 V for ON, ≥ 100 kΩ / 6 V for OFF

■ Voltage Pulse

Maximum frequency: 10 kHz

[2] OUTPUT

Pulse width time requirement: 10 μsec. min. for high and

low levels

1: Low frequency open collector (max. 30 Hz)

2: High frequency open collector (max. 10 kHz)

3: 5 V pulse (max. 10 kHz)

Waveforms: Square or sine

Hi/Lo level: 2 – 50 V for high level; ≤1 V for low level

Input impedance: 10 kΩ min.

4: 12 V pulse (max. 10 kHz)

5: 24 V pulse (max. 10 kHz)

8: Photo MOSFET relay pulse (max. 30 Hz)

OUTPUT SPECIFICATIONS

■ Low Frequency Open Collector

50 V DC @ 100 mA (resistive load)

Maximum frequency: 30 Hz

POWER INPUT

DC Power

R: 24 V DC

HPP SPECIFICATIONS

ES-3461 Rev.9 Page 1/3

http://www.m-system.co.jp/

MODEL: HPP

Timer: Limits ON time within 75 ±25 msec. for wider than

75 msec. pulses

Saturation voltage: 0.5 V DC

■ High Frequency Open Collector

50 V DC @ 100 mA (resistive load)

Maximum frequency: 10 kHz

Saturation voltage: 0.5 V DC

■ Voltage Pulse

Maximum frequency: 10 kHz

High level: Rating (5, 12 or 24 V) ±10 %

Low level: ≤ 0.5V

Load resistance:

≥ 250 Ω for 5 V

≥ 600 Ω for 12 V

≥ 1200 Ω for 24 V

■ Photo MOSFET Relay Pulse

Maximum frequency: 30 Hz

Timer: Limits ON time within 75 ±25 msec. for wider than

75 msec. pulses

Rating: 132 V AC @ 200 mA (cos ø = 1)

30 V DC @ 200 mA (resistive load)

ON resistance: ≤ 2 Ω

INSTALLATION

Current consumption: Approx. 80 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail; Standard Rack Mounting

Frame BX-16H available

Weight: 180 g (0.40 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute

(input to output to power)

1500 V AC @ 1 minute (input or output or power to ground)

OUTPUT LOGIC

VOLTAGE PULSE

OUTPUT

OPEN COLLECTOR or

PHOTO MOSFET RELAY PULSE OUTPUT

INPUT TYPE

INPUT

OFF

Voltage Pulse

OFF

Mechanical Contact

Open Collector

HPP SPECIFICATIONS

ES-3461 Rev.9 Page 2/3

http://www.m-system.co.jp/

MODEL: HPP

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

7.8 (.31)

CLAMP

(top & bottom)

(.59)

DIN RAIL

35mm wide

2–4.5 (.18)

HOLE

15 (.59) deep

8–M3.5

SCREW

107 (4.21)

137 (5.39)

26 (1.02)

[3.3 (.13)]

•When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Waveform

Output

Driver

–

Timer

Shaper

INPUT

OUTPUT

POWER

SENSOR EXCITATION

12V Supply

Base Socket

* Timer is provided for low frequency open collector or photo MOSFET relay pulse output.

Input Connection Examples

Output Connection Examples

■ Mechanical Contact or Open Collector ■ Open Collector

■ Photo MOSFET Relay Pulse

• AC Powered

Relay or

Counter Coil

–

Varistor or Spark

Quenching Circuit

LOAD

+12V

PWR

4kΩ

■ Voltage Pulse

• DC Powered

Relay or

Counter Coil

■ Voltage Pulse

–

Spark Quenching

Diode

–

LOAD

+12V

PWR

Specifications are subject to change without notice.

HPP SPECIFICATIONS

ES-3461 Rev.9 Page 3/3

http://www.m-system.co.jp/

相关型号：