JR-4D-F

更新时间:2024-10-29 23:18:29
品牌:MSYSTEM
描述:Plug-in Signal Conditioners M-UNIT

JR-4D-F 概述

Plug-in Signal Conditioners M-UNIT

JR-4D-F 数据手册

通过下载JR-4D-F数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
MODEL: JR  
0: Specify  
Plug-in Signal Conditioners M-UNIT  
Note: Consult M-System for 2-wire RTD  
RTD TRANSMITTER  
(field-programmable)  
[2] OUTPUT  
Current  
Functions & Features  
A: 4 – 20 mA DC (Load resistance 750 Ω max.)  
B: 2 – 10 mA DC (Load resistance 1500 Ω max.)  
C: 1 – 5 mA DC (Load resistance 3000 Ω max.)  
D: 0 – 20 mA DC (Load resistance 750 Ω max.)  
E: 0 – 16 mA DC (Load resistance 900 Ω max.)  
F: 0 – 10 mA DC (Load resistance 1500 Ω max.)  
G: 0 – 1 mA DC (Load resistance 15 kΩ max.)  
Z: Specify current (See OUTPUT SPECIFICATIONS)  
Voltage  
• Accepting direct input from an RTD and providing  
standard process signal  
• Micro-processor based  
• Field-programmable temperature range  
• Linearization  
• Burnout protection  
• Isolation up to 2000 V AC  
• Loop testing via hand-held programmer PU-2x  
• High-density mounting  
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)  
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)  
3: 0 – 1 V DC (Load resistance 1000 Ω min.)  
4: 0 – 10 V DC (Load resistance 10 kΩ min.)  
5: 0 – 5 V DC (Load resistance 5000 Ω min.)  
6: 1 – 5 V DC (Load resistance 5000 Ω min.)  
0: Specify voltage (See OUTPUT SPECIFICATIONS)  
Typical Applications  
• Ideal for quick spare part  
• Power plant (2000 V AC isolation)  
50  
(1.97)  
80  
(3.15)  
[3] POWER INPUT  
AC Power  
B: 100 V AC  
C: 110 V AC  
D: 115 V AC  
F: 120 V AC  
G: 200 V AC  
H: 220 V AC  
J: 240 V AC  
127  
(5)  
mm (inch)  
MODEL: JR–[1][2]–[3][4]  
ORDERING INFORMATION  
• Code number: JR-[1][2]-[3][4]  
DC Power  
S: 12 V DC  
Specify a code from below for each of [1] through [4].  
(e.g. JR-4A-B/BL/Q)  
R: 24 V DC  
V: 48 V DC  
• Temperature range (e.g. 0 – 500°C)  
• Special output range (For codes Z & 0)  
• Specify the specification for option code /Q  
(e.g. /C01/S01)  
[4] OPTIONS (multiple selections)  
Burnout  
blank: Upscale burnout  
/BL: Downscale burnout  
[1] INPUT RTD (2- or 3-wire)  
1: JPt 100 (JIS'89)  
Other Options  
blank: none  
(Usable range: -200 to +500°C, -328 to +932°F; min.span: 50°C, 90°F)  
3: Pt 100 (JIS'89)  
/Q: Option other than the above (specify the specification)  
(Usable range: -200 to +650°C, -328 to +1202°F; min.span: 50°C, 90°F)  
4: Pt 100 (JIS'97, IEC)  
(Usable range: -200 to +650°C, -328 to +1202°F; min.span: 50°C, 90°F)  
5: Pt 50 Ω (JIS'81)  
(Usable range: -200 to +500°C, -328 to +932°F; min.span: 100°C, 180°F)  
6: Ni 508.4 Ω  
(Usable range: -50 to +200°C, -58 to +392°F; min.span: 30°C, 54°F)  
JR SPECIFICATIONS  
ES-1663 Rev.10 Page 1/3  
http://www.m-system.co.jp/  
MODEL: JR  
Offset: Max. 1.5 times span  
SPECIFICATIONS OF OPTION: Q (multiple selections)  
COATING (For the detail, refer to M-System's web site.)  
/C01: Silicone coating  
Load resistance: Output drive 15 V max.  
DC Voltage: -10 – +20 V DC  
Span: Min. 5 mV, max. 20 V  
/C02: Polyurethane coating  
Offset: Max. 1.5 times span  
/C03: Rubber coating  
Load resistance: Output drive 1 mA max.; at ≥ 0.5 V  
TERMINAL SCREW MATERIAL  
/S01: Stainless steel  
INSTALLATION  
Power input  
RELATED PRODUCTS  
AC: Operational voltage range: rating ±10 %,  
50/60 ±2 Hz, approx. 3 VA  
• Programming Unit (model: PU-2x)  
• PC configurator software (model: JXCON)  
Downloadable at M-System’s web site.  
A dedicated cable is required to connect the module to the  
PC. Please refer to the internet software download site or  
the users manual for the PC configurator for applicable  
cable types.  
DC: Operational voltage range: rating ±10 %,  
ripple 10 %p-p max., approx. 2 W (90 mA at 24 V)  
Operating temperature: -5 to +55°C (23 to 131°F)  
Operating humidity: 30 to 90 %RH (non-condensing)  
Mounting: Surface or DIN rail  
Weight: 350 g (0.77 lb)  
GENERAL SPECIFICATIONS  
Construction: Plug-in  
PERFORMANCE in percentage of span  
Accuracy: ±0.1 % or ±0.1°C (±0.18°F), whichever is greater  
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)  
Response time: ≤ 0.5 sec. (0 – 90 %)  
Connection: M3.5 screw terminals  
Screw terminal: Chromated steel (standard) or stainless  
steel  
Burnout response: ≤ 10 sec.  
Housing material: Flame-resistant resin (black)  
Isolation: Input to output to power  
Overrange output: Approx. -10 to +120 % at 1 – 5 V  
Zero adjustment: -5 to +5 % (front)  
Span adjustment: 95 to 105 % (front)  
Linearization: Standard  
Line voltage effect: ±0.1 % over voltage range  
Insulation resistance: ≥ 100 MΩ with 500 V DC  
Dielectric strength: 2000 V AC @1 minute (input to output  
to power to ground)  
Adjustments: Programming Unit (model: PU-2x);  
(Refer to the users manual of JXCON for the adjustments  
configurable with JXCON.)  
• RTD type (between Pt 100 and JPt 100 only)  
• temp. range  
• zero and span  
• simulating output  
• Others  
INPUT SPECIFICATIONS  
Maximum leadwire resistance: 20 Ω per wire (3-wire)  
Sensing current: 2 mA (Pt)  
If not specified, the input range is shown below.  
1: JPt 100 (JIS '89) 0 – 100°C  
3: Pt 100 (JIS '89) 0 – 100°C  
4: Pt 100 (JIS '97, IEC) 0 – 100°C  
5: Pt 50 Ω (JIS '81) 0 – 200°C  
6: Ni 508.4 Ω 0 – 100°C  
OUTPUT SPECIFICATIONS  
■ DC Current: 0 – 20 mA DC  
Minimum span: 1 mA  
JR SPECIFICATIONS  
ES-1663 Rev.10 Page 2/3  
http://www.m-system.co.jp/  
MODEL: JR  
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)  
CLAMP  
(top & bottom)  
7.8 (.31)  
DIN RAIL  
35mm wide  
6
5
4
3
2–4.5 (.18) dia.  
MTG HOLE  
15 (.59) deep  
7
8
1
2
8–M3.5  
SCREW  
50 (1.97)  
107 (4.21)  
127 (5)  
40 (1.57)  
50 (1.97)  
[3.3 (.13)]  
• When mounting, no extra space is needed between units.  
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM  
Burnout  
RTD  
3
4
5
6
A
B
B
Z
S
Isolation  
Low Drift  
Amplifier  
Digital  
Computation  
Output  
Driver  
1
2
+
OUTPUT  
POWER  
Reference  
Resistor  
Constant  
Current  
7
8
U(+)  
V(–)  
MODULAR JACK  
PU-2x  
SERIAL TRANSMISSION LINE  
Base Socket  
Specifications are subject to change without notice.  
JR SPECIFICATIONS  
ES-1663 Rev.10 Page 3/3  
http://www.m-system.co.jp/  

JR-4D-F 相关器件

型号 制造商 描述 价格 文档
JR-4D-F/BL MSYSTEM Plug-in Signal Conditioners M-UNIT 获取价格
JR-4D-F/Q MSYSTEM Plug-in Signal Conditioners M-UNIT 获取价格
JR-4D-G MSYSTEM Plug-in Signal Conditioners M-UNIT 获取价格
JR-4D-G/BL MSYSTEM Plug-in Signal Conditioners M-UNIT 获取价格
JR-4D-G/Q MSYSTEM Plug-in Signal Conditioners M-UNIT 获取价格
JR-4D-H MSYSTEM Plug-in Signal Conditioners M-UNIT 获取价格
JR-4D-H/BL MSYSTEM Plug-in Signal Conditioners M-UNIT 获取价格
JR-4D-H/Q MSYSTEM Plug-in Signal Conditioners M-UNIT 获取价格
JR-4D-J MSYSTEM Plug-in Signal Conditioners M-UNIT 获取价格
JR-4D-J/BL MSYSTEM Plug-in Signal Conditioners M-UNIT 获取价格

JR-4D-F 相关文章

  • HARTING(浩亭)圆形连接器产品选型手册
    2024-10-31
    6
  • HYCON(宏康科技)产品选型手册
    2024-10-31
    6
  • GREEGOO整流二极管和晶闸管产品选型手册
    2024-10-31
    7
  • 西门子豪掷106亿美元,战略收购工程软件巨头Altair
    2024-10-31
    8