KWVS-A1BC-H/Q 概述
Plug-in Signal Conditioners K-UNIT
KWVS-A1BC-H/Q 数据手册
通过下载KWVS-A1BC-H/Q数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载MODEL: KWVS
Z: Specify current (See INPUT SPECIFICATIONS)
Plug-in Signal Conditioners K-UNIT
Voltage
1: 0 – 10 mV DC (Input resistance 10 kΩ min.)
15: 0 – 50 mV DC (Input resistance 10 kΩ min.)
16: 0 – 60 mV DC (Input resistance 10 kΩ min.)
2: 0 – 100 mV DC (Input resistance 100 kΩ min.)
3: 0 – 1 V DC (Input resistance 1 MΩ min.)
4: 0 – 10 V DC (Input resistance 1 MΩ min.)
5: 0 – 5 V DC (Input resistance 1 MΩ min.)
6: 1 – 5 V DC (Input resistance 1 MΩ min.)
4W: -10 – +10 V DC (Input resistance 1 MΩ min.)
5W: -5 – +5 V DC (Input resistance 1 MΩ min.)
0: Specify voltage (See INPUT SPECIFICATIONS)
SIGNAL TRANSMITTER
(two isolated outputs)
Functions & Features
• Converting a DC input into two standard process signals
• Fast response type available
• High-density mounting
Typical Applications
• Isolation between control room and field instrumentation
50
(1.97)
[2] OUTPUT 1
Current
80
(3.15)
A: 4 – 20 mA DC (Load resistance 600 Ω max.)
B: 2 – 10 mA DC (Load resistance 1200 Ω max.)
C: 1 – 5 mA DC (Load resistance 2400 Ω max.)
D: 0 – 20 mA DC (Load resistance 600 Ω max.)
E: 0 – 16 mA DC (Load resistance 750 Ω max.)
F: 0 – 10 mA DC (Load resistance 1200 Ω max.)
G: 0 – 1 mA DC (Load resistance 12 kΩ max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
132
(5.20)
mm (inch)
MODEL: KWVS–[1][2][3]-[4][5]
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)
3: 0 – 1 V DC (Load resistance 1000 Ω min.)
4: 0 – 10 V DC (Load resistance 10 kΩ min.)
5: 0 – 5 V DC (Load resistance 5000 Ω min.)
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
4W: -10 – +10 V DC (Load resistance 10 kΩ min.)
5W: -5 – +5 V DC (Load resistance 5000 Ω min.)
0: Specify voltage (See OUTPUT SPECIFICATIONS)
ORDERING INFORMATION
• Code number: KWVS-[1][2][3]-[4][5]
Specify a code from below for each of [1] through [5].
(e.g. KWVS-6AA-B/K/Q)
• Special input and output ranges (For codes Z & 0)
• Specify the specification for option code /Q
(e.g. /C01/S01)
Note: When the user requires a current and a voltage
output, specify the current to be the Output 1 which allows
a greater load.
[3] OUTPUT 2
Current
[1] INPUT
A: 4 – 20 mA DC (Load resistance 350 Ω max.)
B: 2 – 10 mA DC (Load resistance 700 Ω max.)
C: 1 – 5 mA DC (Load resistance 1400 Ω max.)
D: 0 – 20 mA DC (Load resistance 350 Ω max.)
E: 0 – 16 mA DC(Load resistance 430 Ω max.)
F: 0 – 10 mA DC (Load resistance 700 Ω max.)
G: 0 – 1 mA DC (Load resistance 7000 Ω max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
Current
A: 4 – 20 mA DC (Input resistance 250 Ω)
A1: 4 – 20 mA DC (Input resistance 50 Ω)
B: 2 – 10 mA DC (Input resistance 500 Ω)
C: 1 – 5 mA DC (Input resistance 1000 Ω)
D: 0 – 20 mA DC (Input resistance 50 Ω)
E: 0 – 16 mA DC (Input resistance 62.5 Ω)
F: 0 – 10 mA DC (Input resistance 100 Ω)
G: 0 – 1 mA DC (Input resistance 1000 Ω)
H: 10 – 50 mA DC (Input resistance 100 Ω)
J: 0 – 10 μA DC (Input resistance 1000 Ω)
K: 0 – 100 μA DC (Input resistance 1000 Ω)
GW: -1 – +1 mA DC (Input resistance 1000 Ω)
FW: -10 – +10 mA DC (Input resistance 100 Ω)
Same range availability as Output 1
[4] POWER INPUT
AC Power
B: 100 V AC
KWVS SPECIFICATIONS
ES-3516 Rev.7 Page 1/4
http://www.m-system.co.jp/
MODEL: KWVS
C: 110 V AC
D: 115 V AC
F: 120 V AC
G: 200 V AC
H: 220 V AC
J: 240 V AC
DC Power
S: 12 V DC
R: 24 V DC
OUTPUT SPECIFICATIONS
■ DC Current: 0 – 20 mA DC
Minimum span: 1 mA
Offset: Max. 1.5 times span
Load resistance: Output drive 12 V max. for Output 1;
7 V max. for Output 2
■ DC Voltage: -10 – +12 V DC
Minimum span: 5 mV
Offset: Max. 1.5 times span
Load resistance: Output drive 1 mA max. at ≥ 0.5 V
[5] OPTIONS (multiple selections)
Response Time (0 – 90 %)
INSTALLATION
Power input
blank: Standard (≤ 0.5 sec.)
/K: Fast Response (Approx. 25 msec.)
Other Options
•AC: Operational voltage range: rating ±10 %,
50/60 ±2 Hz, approx. 3 VA
blank: none
•DC: Operational voltage range: rating ±10 %
ripple 10 %p-p max., approx. 3 W (125 mA at 24 V)
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
Weight: 400 g (0.88 lb)
/C02: Polyurethane coating
/C03: Rubber coating
PERFORMANCE in percentage of span
Accuracy: ±0.1 %
TERMINAL SCREW MATERIAL
/S01: Stainless steel
Temp. coefficient: ±0.02 %/°C (±0.01 %/°F)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute
(input to output to power to ground)
GENERAL SPECIFICATIONS
Construction: Plug-in
Connection: M3.5 screw terminals
1000 V AC @ 1 minute (output 1 to output 2)
Screw terminal: Chromated steel (standard) or stainless
steel
Housing material: Flame-resistant resin (black)
Isolation: Input to output 1 to output 2 to power
Overrange output: Approx. -10 to +120 % at 1 – 5 V
Zero adjustment: -5 to +5 % (front)
Span adjustment: 95 to 105 % (front)
Adjustable individually for each output 1 and output 2.
INPUT SPECIFICATIONS
■ DC Current:
Shunt resistor attached to the input terminals (0.5 W)
Specify input resistance value for code Z.
■ DC Voltage: -300 – +300 V DC
Minimum span: 3 mV
Offset: Max. 1.5 times span
Input resistance
Span 3 – 10 mV : ≥ 10 kΩ
Span 10 – 100 mV : ≥ 10 kΩ
Span 0.1 – 1 V : ≥ 100 kΩ
Span ≥ 1 V : ≥ 1 MΩ
KWVS SPECIFICATIONS
ES-3516 Rev.7 Page 2/4
http://www.m-system.co.jp/
MODEL: KWVS
EXTERNAL DIMENSIONS unit: mm (inch)
CLAMP
(top & bottom)
7.8 (.31)
DIN RAIL
35mm wide
8
9
7
6
5
4
2
–4.5 (.18) dia.
MTG HOLE
25 (.98) deep
3
2
10 11
1
11
–M3.5
SCREW
50 (1.97)
103 (4.06)
132 (5.20)
40 (1.57)
50 (1.97)
[3.3 (.13)]
• When mounting, no extra space is needed between units.
TERMINAL ASSIGNMENTS unit: mm (inch)
INPUT RESISTOR
(model: REM)
8
7
6
5
4
9
3
2
10 11
1
Input shunt resistor attached
for current input.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Z
Z
S
Isolation
Low Drift
Amplifier
Output
Driver
+
–
5
6
4
3
9
1
2
+
–
*
INPUT
R
OUTPUT 1
S
Output
Driver
10 +
11 –
OUTPUT 2
POWER
7
8
U(+)
V(–)
Base Socket
*Input shunt resistor attached for current input.
KWVS SPECIFICATIONS
ES-3516 Rev.7 Page 3/4
http://www.m-system.co.jp/
MODEL: KWVS
Specifications are subject to change without notice.
KWVS SPECIFICATIONS
ES-3516 Rev.7 Page 4/4
http://www.m-system.co.jp/
KWVS-A1BC-H/Q 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
KWVS-A1BC-J | MSYSTEM | Plug-in Signal Conditioners K-UNIT | 获取价格 | |
KWVS-A1BC-J/K | MSYSTEM | Plug-in Signal Conditioners K-UNIT | 获取价格 | |
KWVS-A1BC-J/Q | MSYSTEM | Plug-in Signal Conditioners K-UNIT | 获取价格 | |
KWVS-A1BC-R | MSYSTEM | Plug-in Signal Conditioners K-UNIT | 获取价格 | |
KWVS-A1BC-R/K | MSYSTEM | Plug-in Signal Conditioners K-UNIT | 获取价格 | |
KWVS-A1BC-R/Q | MSYSTEM | Plug-in Signal Conditioners K-UNIT | 获取价格 | |
KWVS-A1BC-S | MSYSTEM | Plug-in Signal Conditioners K-UNIT | 获取价格 | |
KWVS-A1BC-S/K | MSYSTEM | Plug-in Signal Conditioners K-UNIT | 获取价格 | |
KWVS-A1BC-S/Q | MSYSTEM | Plug-in Signal Conditioners K-UNIT | 获取价格 | |
KWVS-A1BD-G | MSYSTEM | Plug-in Signal Conditioners K-UNIT | 获取价格 |
KWVS-A1BC-H/Q 相关文章
- 2024-10-31
- 6
- 2024-10-31
- 6
- 2024-10-31
- 7
- 2024-10-31
- 8