M1EXV-1 [MSYSTEM]
Multi-output Super-mini Signal Conditioners with Display M1E-1 Series;型号: | M1EXV-1 |
厂家: | M-SYSTEM |
描述: | Multi-output Super-mini Signal Conditioners with Display M1E-1 Series |
文件: | 总8页 (文件大小:271K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: M1EXV-1
Multi-output Super-mini Signal Conditioners
with Display M1E-1 Series
NO. OF INPUT CHANNELS
1: 1 channel
OUTPUT – Field-selectable
◆ DC Output
SIGNAL TRANSMITTER
(multi-output, PC programmable)
Functions & Features
• Current output: 0 - 20 mA DC
• Voltage output: -5 - +5 V DC
• Voltage output: -10 - +10 V DC
• Converts DC input from a sensor into a standard process
signal
• 4 channels
• Isolation between inputs and outputs
• Adjustments with the front button
• OEL display with good visibility
• Linearization available for each channel (111 points)
NO. OF OUTPUT CHANNELS
4: 4 channels
POWER INPUT
DC Power
Typical Applications
R: 24 V DC
• Isolation between control room and field instrumentation
• Ideal for quick spare part
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[1] OPTIONS
36 (1.42)
blank: none
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
99
(3.90)
/C02: Polyurethane coating
/C03: Rubber coating
125 (4.92)
EX-FACTORY SETTING
mm (inch)
/SET: Preset according to the Ordering Information Sheet
(No. ESU-6033)
Note: The !gure shows the combination
of the unit and the base.
RELATED PRODUCTS
• Installation base (model: M1E-BS2)
MODEL: M1EXV-1-4-R[1]
• M1E configurator software (model: M1ECFG (M1E1CFG))
Downloadable at M-System’s web site.
ORDERING INFORMATION
• Code number: M1EXV-1-4-R[1]
Specify a code from below for [1].
(e.g. M1EXV-1-4-R/Q)
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual (EM-6036) for the M1E configurator for
applicable cable types.
• Specify the specification for option code /Q
(e.g. /C01/SET)
GENERAL SPECIFICATIONS
Construction: Plug-in
INPUT – Field-selectable
◆ DC Input
Connection
• Connected to base with connector
• Base
• Current input: 0 - 20 mA DC
• Voltage input: -5 - +5 V DC
• Voltage input: -10 - +10 V DC
M2.6 screw terminals (torque: 0.5 N·m)
Applicable solderless terminal size (M3)
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (black)
Isolation: Input to output 1 to output 2 to output 3 to output
M1EXV-1 SPECIFICATIONS
ES-6033 Rev.3 Page 1/8
https://www.m-system.co.jp/
MODEL: M1EXV-1
4 to power
OUTPUT SPECIFICATIONS
■ DC Current
Overrange output: Approx. -5 to +105 % (Not available for
current output not greater than 0 mA)
Output range: 0 – 20 mA DC
Conformance range: 0 – 21mA DC
Minimum span: 1 mA
Zero fine adjustment: -5 to +5 % (front button)
Span fine adjustment: 95 to 105 % (front button)
Configuration: Program with front buttons or Via PC.
Programmable features include: Refer to the parameter list.
Configurator connection: 2.5 dia. miniature jack;
RS-232-C level
Load resistance: Output drive 15 V max.
(e.g. 4 – 20 mA: 750 Ω [15 V ÷ 20 mA])
(Not available to output less than 0 mA, output range may
not be extended to -5 %)
■Recommended solderless terminal size - M3 (unit: mm)
■ DC Voltage
•Narrow Spans (mV)
3max
4min
Output range: -5 - +5 V DC
Conformance range: -5.5 - +5.5 V DC
Minimum span: 250 mV
3.2 dia.
•Wide Spans (V)
Output range: -10 - +10 V DC
Conformance range: -11 - +11 V DC
Minimum span: 1 V
12max
(mm)
Load resistance: 10 kΩ min.
DISPLAY
Display functions: Displays and sets measured range,
INSTALLATION
engineering unit
Power consumption
Display size: Approx. 15.6 × 20.8 mm (0.61” × 0.82”)
Number of pixels: 68 × 95 (horizontal × vertical)
Character color: Yellow
•DC: ≤ 5 W
Operating temperature: -5 to +55°C (23 to 131°F)
Storage temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 10 to 85 %RH (non-condensing)
Mounting: Surface or DIN rail
Display life: Approx. 40000 hours
(Expected time for the Display brightness to be reduced to
50 % when the Display is used continuously with brightness
setting 2 in 25 ℃)
Weight: 150 g (0.33 lb) except base
Display type: OEL display
Display digit: Negative 5 digits, positive 6 digits (-99999 to
999999)
PERFORMANCE
Accuracy: Input accuracy + output accuracy
input accuracy + (output accuracy × segment gain) when
segment gain > 1
Decimal point position: Selectable
See CALCULATION EXAMPLES OF OVERALL ACCURACY.
Inversely proportional to the setting span.
Input accuracy: (% of max. input range): ±0.03 %
Display accuracy:
INPUT SPECIFICATIONS
■ DC Current: Input resistor incorporated (50 Ω)
Input range: 0 - 20 mA DC
Minimum span: 1 mA
Input display: Input accuracy ±1 digit
Output display: Input accuracy + output accuracy ±1 digit
Output accuracy: (% of max. output range): ±0.03 %
Temp. coefficient (% of max. I/O range): ±0.015 %/°C
(±0.008 %/°F)
The measurement available for -5 - +105% of input setting
range.
■ DC Voltage
•Narrow Spans (mV)
Input range: -5 – +5 V DC
Minimum span: 250 mV
Response time (filter time constant: 0 sec.): ≤ 0.5 sec.
(0 – 90 %)
•Wide Spans (V)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(input to output 1 to output 2 to output 3 to output 4 to
power to ground)
Input range: -10 – +10 V DC
Minimum span: 1 V
Input resistance: 1 MΩ minimum
The measurement available for -5 - +105% of input setting
range.
M1EXV-1 SPECIFICATIONS
ES-6033 Rev.3 Page 2/8
https://www.m-system.co.jp/
MODEL: M1EXV-1
CALCULATION EXAMPLES OF OVERALL ACCURACY
[Example] Input signal: 1 - 5 V DC, Output signal: 4 -
20 mA DC, Max segment gain with linearization set: 1.5
Input Range -5 – +5 V, Input Setting 1 – 5 V, Output Range 0
– 20 mA, Output Setting 4 – 20 mA, Segment Gain 1.5
■ Overall accuracy
• Input Accuracy = Input Range Span (10 V) ÷ Input Span
(4 V) × 0.03 % = 0.075 %
• Output Accuracy = Output Range Span (20 mA) ÷ Output
Span (16 mA) × 0.03 % × Segment Gain (1.5) = 0.05625 %
Overall Accuracy = 0.075 + 0.05625 = ±0.13125 %
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
M1EXV-1 SPECIFICATIONS
ES-6033 Rev.3 Page 3/8
https://www.m-system.co.jp/
MODEL: M1EXV-1
EXTERNAL VIEW
Display
Up Button
Down Button
Set Button
Mode Button
Configurator Jack
COMPONENT
Display
FUNCTION
Indicates present values, setting values and abnormal information.
Two types of present values are displayed respectively at the upper and lower parts according to setting.
Mode button
Shifts from Measuring mode to each setting mode.
The destination changes depending on how long the button is held down.
While in each setting mode, pressing Mode button shift to the setting mode for the next output.
Pressing Mode button for ≥ 2 seconds returns to Measuring mode from each setting mode.
In Measuring mode, shortly pressing the button shifts to the next screen.
Set button
Shifts the setting value of each setting parameter item to a setting changeable state.
When at setting changeable state, used to move through the digits of setting value and to enter (save) the
setting value.
Up button
Shifts through setting parameter items and to increase or select the setting value.
Shifts through setting parameter items and to decrease oar select the setting value.
Down button
Congurator Jack
Used to perform conguration with M1E congurator software (model: M1ECFG).
When using the software, set the Lockout setting of the unit to ‘Lock’.
Refer to the operating manual (EM-6033-B) for detailed procedures of parameter settings.
TERMINAL ASSIGNMENTS
No. FUNCTION
No. FUNCTION
1
6
2
7
3
8
4
9
5
1
2
3
4
5
6
7
8
9
Unused
11 OUT1 Output +
12 OUT1 Output –
13 OUT4 Output +
14 OUT2 Output +
15 OUT2 Output –
16 OUT3 Output +
17 OUT3 Output –
18 OUT4 Output –
19 Power +
Unused
10
Input voltage +
Input current +
Input –
Unused
Unused
Unused
Unused
10 Unused
20 Power –
11
16
12
17
13
18
14
19
15
20
* Base does not come with the unit. Please order separately.
M1EXV-1 SPECIFICATIONS
ES-6033 Rev.3 Page 4/8
https://www.m-system.co.jp/
MODEL: M1EXV-1
PARAMETER LIST
The following parameters can be set or checked, by the front button operation, or fron the PC by using M1E configuration software
(model: M1ECFG).
MODE
ITEM SETTING PARAMETER
RANGE
UNIT
—
INITIAL VALUE
Lock
Input setting
01
11
Lockout setting
Input range
Lock / Unlock
0 – 20 mA
-5 – +5 V
—
0 – 20 mA
-10 – +10 V
12
13
0% input setting
0.000 – 19.000
-5.000 – 4.750
-10.000 – 9.000
1.000 – 20.000
-4.750 – 5.000
-9.000 – 10.000
-99999 – 999999
-99999 – 999999
No decimal point
The number of decimal places : 1 – 5
Choose from 68 types*
0 – 30
mA
V
4.000
V
100% input setting
mA
V
20.000
V
14
15
16
0% input scaling
—
—
—
0.00
100% input scaling
Input decimal scaling
100.00
2 places of decimals
17
31
41
42
45
01
51
61
Unit (INP Scaling)
—
sec.
%
%
Filter time constant
Input Zero fine adjust
Input Span fine adjust
Input User’s table linearization
Lockout setting
0
-5.000 – 5.000
95.000 – 105.000
Cancel / Set
0.000
100.000
Cancel
Lock
%
—
Output 1 setting
Lock / Unlock
Disable / Enable
0 – 20 mA
—
OUT1 Output enable
OUT1 Output range
—
Enable
0 – 20 mA
—
-5 – +5 V
-10 – +10 V
62
63
OUT1 0% output setting
OUT1 100% output setting
0.000 – 19.000
-5.000 – 4.750
-10.000 – 9.000
1.000 – 20.000
-4.750 – 5.000
-9.000 – 10.000
-5.000 – 5.000
95.000 – 105.000
Cancel / Set
mA
V
4.000
V
mA
V
20.000
V
91
92
95
98
01
OUT1 Output Zero fine adjust
OUT1 Output Span fine adjust
OUT1 User’s table linearization
OUT1 Loop test
%
%
—
%
—
—
—
0.000
100.000
Cancel
Cancel
Lock
-5.00 – 105.00
Lock / Unlock
Disable / Enable
0 – 20 mA
Output 2 Setting
Lockout setting
151 OUT2 Output enable
161 OUT2 Output range
Enable
0 – 20 mA
-5 – +5 V
-10 – +10 V
162 OUT2 0% output setting
163 OUT2 100% output setting
0.000 – 19.000
-5.000 – 4.750
-10.000 – 9.000
1.000 – 20.000
-4.750 – 5.000
-9.000 – 10.000
-5.000 – 5.000
95.000 – 105.000
Cancel / Set
mA
V
4.000
V
mA
V
20.000
V
191 OUT2 Output Zero fine adjust
192 OUT2 Output Span fine adjust
195 OUT2 User’s table linearization
198 OUT2 Loop test
%
%
—
%
0.000
100.000
Cancel
Cancel
-5.00 – 105.00
M1EXV-1 SPECIFICATIONS
ES-6033 Rev.3 Page 5/8
https://www.m-system.co.jp/
MODEL: M1EXV-1
MODE
ITEM
01
SETTING PARAMETER
Lockout setting
RANGE
Lock / Unlock
UNIT
—
INITIAL VALUE
Lock
Output 3 setting
251 OUT3 Output enable
261 OUT3 Output range
Disable / Enable
—
Enable
0 – 20 mA
-5 – +5 V
-10 – +10 V
—
0 – 20 mA
262 OUT3 0% output setting
263 OUT3 100% output setting
0.000 – 19.000
-5.000 – 4.750
-10.000 – 9.000
mA
V
4.000
V
1.000 – 20.000
-4.750 – 5.000
-9.000 – 10.000
mA
V
20.000
V
291 OUT3 Output Zero fine adjust
292 OUT3 Output Span fine adjust
295 OUT3 User’s table linearization
298 OUT3 Loop test
-5.000 – 5.000
95.000 – 105.000
Cancel / Set
%
%
—
%
—
—
—
0.000
100.000
Cancel
Cancel
Lock
-5.00 – 105.00
Lock / Unlock
Disable / Enable
Output 4 setting
01
Lockout setting
351 OUT4 Output enable
361 OUT4 Output range
Enable
0 – 20 mA
0 – 20 mA
-5 – +5 V
-10 – +10 V
362 OUT4 0% output setting
363 OUT4 100% output setting
0.000 – 19.000
-5.000 – 4.750
-10.000 – 9.000
mA
V
4.000
V
1.000 – 20.000
-4.750 – 5.000
-9.000 – 10.000
mA
V
20.000
V
391 OUT4 Output Zero fine adjust
392 OUT4 Output Span fine adjust
395 OUT4 User’s table linearization
398 OUT4 Loop test
-5.000 – 5.000
95.000 – 105.000
Cancel / Set
%
%
—
%
—
—
0.000
100.000
Cancel
Cancel
Lock
-5.00 – 105.00
Lock / Unlock
Advanced
01
Lockout setting
Display 1 setting
401
Upper: choose from 7 types*
Lower: choose from 8 types*
Upper: INPUT
Lower: OUTPUT1
402 Display 2 setting
403 Display 3 setting
404 Display 4 setting
Upper: choose from 8 types*
Lower: choose from 8 types*
—
—
—
Upper: INPUT
Lower: OUTPUT2
Upper: choose from 8 types*
Lower: choose from 8 types*
Upper: INPUT
Lower: OUTPUT3
Upper: choose from 8 types*
Lower: choose from 8 types*
Upper: INPUT
Lower: OUTPUT4
405 Display change time
406 Brightness
0 (fixed), 1 – 60
1 (darkest) – 4 (brightest)
0 (always on), 1 – 60
OFF / RESET
sec.
—
3
4
407 Display timeout
408 Reset all settings
409 Version indication
min.
—
10
OFF
—
—
—
* For detailed setting, refer to the operating manual (EM-6033-B).
M1EXV-1 SPECIFICATIONS
ES-6033 Rev.3 Page 6/8
https://www.m-system.co.jp/
MODEL: M1EXV-1
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm
125 (4.92)
[4 (.16)]
45 (1.77)
36 (1.42)
1
6
2
7
3
8
4
9
5
10
DIN RAIL
35mm wide
11 12 13 14 15
16
18 19 20
17
* Base does not come with the unit.
Please order separately.
MOUNTING REQUIREMENTS unit: mm [inch]
2–M4 SCREW
* Mounting requirements for base.
M1EXV-1 SPECIFICATIONS
ES-6033 Rev.3 Page 7/8
https://www.m-system.co.jp/
MODEL: M1EXV-1
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Isolation
+
Output
Driver
+
11
12
3
4
5
Isolation
OUTPUT 1
OUTPUT 2
OUTPUT 3
+
–
INPUT
VOLTAGE
Low Drift
Amplifier
‒
INPUT
CURRENT
Isolation
Isolation
Isolation
–
50Ω
Output
Driver
14
15
+
Digital
Computation
Circuit
‒
JACK
CONFIGURATOR
1
2
Output
Driverv
16
17
+
‒
6
Output
Driver
7
13
18
+
OUTPUT 4
POWER
8
‒
9
Display
Circuit
19
20
+
Power
Circuit
10
‒
Front
Button
Base
Specifications are subject to change without notice.
M1EXV-1 SPECIFICATIONS
ES-6033 Rev.3 Page 8/8
https://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明