首页 > M2AVS-16112-R

M2AVS-16112-R

更新时间：2024-11-08 22:48:41

品牌：MSYSTEM

描述：Super-mini Signal Conditioners Mini-M Series

PDF下载

中文翻译

PCB计价

概述
数据手册

如果您发现信息不准确，欢迎纠错

M2AVS-16112-R 概述

Super-mini Signal Conditioners Mini-M Series

M2AVS-16112-R 数据手册

通过下载M2AVS-16112-R数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载

MODEL: M2AVS

Z: Specify current (See INPUT SPECIFICATIONS)

Super-mini Signal Conditioners Mini-M Series

Voltage

1: 0 – 10 mV DC (Input resistance 10 kΩ min.)

15: 0 – 50 mV DC (Input resistance 10 kΩ min.)

16: 0 – 60 mV DC (Input resistance 10 kΩ min.)

2: 0 – 100 mV DC (Input resistance 100 kΩ min.)

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

4W: -10 – +10 V DC (Input resistance 1 MΩ min.)

5W: -5 – +5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

01: Specify voltage (See INPUT SPECIFICATIONS)

(Select ‘/CE’ for ‘Standards & Approvals’ code.)

DC ALARM

Functions & Features

• Provides N.O. relay outputs at preset DC input levels

• Dual trip

• Multi-turn potentiometer adj.

• Monitor jacks help setpoint adj.

• Power ON timer

• Relays can be powered 110 V DC

Typical Applications

• Annunciator

• Various alarm applications

23 (.91)

[2] SETPOINT 1 OUTPUT

1: Hi (coil energized at alarm)

3: Lo (coil energized at alarm)

Model

M2AVS

(2.99)

[3] SETPOINT 2 OUTPUT

1: Hi (coil energized at alarm)

3: Lo (coil energized at alarm)

124

(4.88)

mm (inch)

MODEL: M2AVS–[1][2][3][4]–[5][6]

[4] OUTPUT

2: Relay; N.O. or make contact

6: Photo MOSFET relay; N.O.

ORDERING INFORMATION

• Code number: M2AVS-[1][2][3][4]-[5][6]

Specify a code from below for each of [1] through [6].

(e.g. M2AVS-6112-R/CE/Q)

[5] POWER INPUT

AC Power

• Special input range (For codes Z, 0 & 01)

• Specify the specification for option code /Q

(e.g. /C01/S01)

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

DC Power

R: 24 V DC

[1] INPUT

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

R2: 11 – 27 V DC

Current

A: 4 – 20 mA DC (Input resistance 250 Ω)

A1: 4 – 20 mA DC (Input resistance 50 Ω)

B: 2 – 10 mA DC (Input resistance 500 Ω)

C: 1 – 5 mA DC (Input resistance 1000 Ω)

D: 0 – 20 mA DC (Input resistance 50 Ω)

E: 0 – 16 mA DC (Input resistance 62.5 Ω)

F: 0 – 10 mA DC (Input resistance 100 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 100 Ω)

J: 0 – 10 μA DC (Input resistance 1000 Ω)

K: 0 – 100 μA DC (Input resistance 1000 Ω)

GW: -1 – +1 mA DC (Input resistance 1000 Ω)

FW: -10 – +10 mA DC (Input resistance 100 Ω)

(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

[6] OPTIONS (multiple selections)

Standards & Approvals (must be specified)

/N: Without CE

/CE: CE marking

Other Options

blank: none

M2AVS SPECIFICATIONS

ES-5041 Rev.11 Page 1/4

http://www.m-system.co.jp/

MODEL: M2AVS

/Q: Option other than the above (specify the specification)

For maximum relay life with inductive loads, external

protection is recommended.

■ Photo MOSFET Relay

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

Maximum switching voltage: 30 V AC or 50 V DC

Maximum switching current: 0.5 A

ON resistance: ≤ 2 kΩ

/C02: Polyurethane coating

Leakage current at OFF: ≤ 10 μA

For maximum relay life with inductive loads, external

protection is recommended.

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

Alarm Trip Operation

Terminal No. in parentheses

(5-8)ON/Hi

GENERAL SPECIFICATIONS

Construction: Plug-in

Output 1

(5-8)ON/Lo

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

(9-12)ON/Hi

Output 2

(9-12)ON/Lo

Input

(%)

Housing material: Flame-resistant resin (black)

Isolation: Input to output 1 to output 2 to power

Setpoint adjustments: Multi-turn screwdriver adjustments

(front); 0 – 100 % independently

▲

100

Output 2

Setpoint

Output 1

Setpoint

Trip Operation in Power Failure: Both relays turn off.

Monitor jacks: Output 0 – 1 V for 0 – 100 % setpoints

Hysteresis (deadband): ≤ 0.5 %

INSTALLATION

Power Consumption

•AC:

Front LEDs

Output 1: Red LED turns on when the coil is energized.

Output 2: Green LED turns on when the coil is energized.

Power ON timer: Relays de-energized for approx. 1 seconds

after power is turned on.

Approx. 3 VA at 100 V

Approx. 4 VA at 200 V

Approx. 5 VA at 264 V

•DC: Approx. 3 W

INPUT SPECIFICATIONS

■ DC Current:

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Shunt resistor attached to the input terminals (0.5 W)

Specify input resistance value for code Z.

■ DC Voltage: -300 – +300 V DC

(-30 – +30 V for the input code 01. Span 30 V max.)

Minimum span: 3 mV

Weight: 150 g (0.33 lb)

PERFORMANCE in percentage of span

Setpoint monitor accuracy: ±0.5 %

Offset: Max. 1.5 times span

Temp. coefficient: ±0.05 %/°C (±0.03 %/°F)

Response time: ≤ 0.5 sec. (0 – 100 % at 90 % setpoint)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output 1

to output 2 to power to ground)

•Input resistance

Span 3 – 10 mV : ≥ 10 kΩ

Span 10 – 100 mV : ≥ 10 kΩ

Span 0.1 – 1 V : ≥ 100 kΩ

Span ≥ 1 V : ≥ 1 MΩ

OUTPUT SPECIFICATIONS

■ Relay Contact:

STANDARDS & APPROVALS

EU conformity:

120 V AC @0.5 A (cos ø = 1)

EMC Directive

240 V AC @0.5 A (cos ø = 1)

EMI EN 61000-6-4

30 V DC @0.5 A (resistive load)

EMS EN 61000-6-2

Maximum switching voltage: 250 V AC or 120 V DC

Maximum switching power: 120 VA or 15 W (≤ 0.5 A)

Minimum load: 5 V DC @10 mA

Low Voltage Directive

EN 61010-1

Measurement Category II (output)

Mechanical life: 5 × 10 cycles

M2AVS SPECIFICATIONS

ES-5041 Rev.11 Page 2/4

http://www.m-system.co.jp/

MODEL: M2AVS

Installation Category II (power)

Pollution Degree 2

Input to output to power: Basic insulation (300 V)

RoHS Directive

EN 50581

FRONT VIEW

Output 1

Monitor LED

Output 1

Setpoint Monitor (A1)

Output 2

Monitor LED

Output 2

Setpoint Monitor (A2)

COM

Output 1

Setpoint Adj.

Output 2

Setpoint Adj.

Refer to the instruction manual for detailed procedures.

EXTERNAL DIMENSIONS unit: mm (inch)

6 (.23)

DIN RAIL

35mm wide

2–4.2x5

(.17x.20)

MTG HOLE

6 (.24) deep

8–M3

SCREW

14 13

21.5 (.85) 7.3 (.29)

86.7 (3.41)

116.7 (4.59)

15 (.59)

[4 (.16)]

23 (.91)

• When mounting, no extra space is needed between units.

TERMINAL ASSIGNMENTS unit: mm (inch)

INPUT RESISTOR

(model: REM2)

14 13

Input shunt resistor attached

for current input.

M2AVS SPECIFICATIONS

ES-5041 Rev.11 Page 3/4

http://www.m-system.co.jp/

MODEL: M2AVS

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

■ Relay Protection

• AC Powered

COM. SP ADJ. A1

Inductive

Load (Coil)

Low Drift

Amplifier

–

Comparator

OUTPUT 1

LOAD

INPUT

Varistor or CR Circuit

• DC Powered

Inductive

Load (Coil)

Comparator

OUTPUT 2

POWER

SP ADJ. A2

LOAD

U(+)

V(–)

Diode, Varistor or

CR Circuit

Base Socket

*Input shunt resistor attached for current input.

Specifications are subject to change without notice.

M2AVS SPECIFICATIONS

ES-5041 Rev.11 Page 4/4

http://www.m-system.co.jp/

M2AVS-16112-R 相关器件

型号	制造商	描述	价格	文档
M2AVS-16112-R/CE	MSYSTEM	Super-mini Signal Conditioners Mini-M Series	获取价格
M2AVS-16112-R/N	MSYSTEM	Super-mini Signal Conditioners Mini-M Series	获取价格
M2AVS-16112-R2	MSYSTEM	Super-mini Signal Conditioners Mini-M Series	获取价格
M2AVS-16112-R2/CE	MSYSTEM	Super-mini Signal Conditioners Mini-M Series	获取价格
M2AVS-16112-R2/N	MSYSTEM	Super-mini Signal Conditioners Mini-M Series	获取价格
M2AVS-16116-M	MSYSTEM	Super-mini Signal Conditioners Mini-M Series	获取价格
M2AVS-16116-M/CE	MSYSTEM	Super-mini Signal Conditioners Mini-M Series	获取价格
M2AVS-16116-M/N	MSYSTEM	Super-mini Signal Conditioners Mini-M Series	获取价格
M2AVS-16116-P	MSYSTEM	Super-mini Signal Conditioners Mini-M Series	获取价格
M2AVS-16116-P/CE	MSYSTEM	Super-mini Signal Conditioners Mini-M Series	获取价格