M2AVS-C132-R2 [MSYSTEM]
Super-mini Signal Conditioners Mini-M Series;![M2AVS-C132-R2](http://pdffile.icpdf.com/pdf2/p00353/img/icpdf/M2AVS-C112-R_2172687_icpdf.jpg)
型号: | M2AVS-C132-R2 |
厂家: | ![]() |
描述: | Super-mini Signal Conditioners Mini-M Series |
文件: | 总4页 (文件大小:120K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: M2AVS
Z: Specify current (See INPUT SPECIFICATIONS)
Super-mini Signal Conditioners Mini-M Series
Voltage
1: 0 – 10 mV DC (Input resistance 10 kΩ min.)
15: 0 – 50 mV DC (Input resistance 10 kΩ min.)
16: 0 – 60 mV DC (Input resistance 10 kΩ min.)
2: 0 – 100 mV DC (Input resistance 100 kΩ min.)
3: 0 – 1 V DC (Input resistance 1 MΩ min.)
4: 0 – 10 V DC (Input resistance 1 MΩ min.)
5: 0 – 5 V DC (Input resistance 1 MΩ min.)
6: 1 – 5 V DC (Input resistance 1 MΩ min.)
4W: -10 – +10 V DC (Input resistance 1 MΩ min.)
5W: -5 – +5 V DC (Input resistance 1 MΩ min.)
0: Specify voltage (See INPUT SPECIFICATIONS)
(Select ‘/N’ for ‘Standards & Approvals’ code.)
01: Specify voltage (See INPUT SPECIFICATIONS)
(Select ‘/CE’ for ‘Standards & Approvals’ code.)
DC ALARM
Functions & Features
• Provides N.O. relay outputs at preset DC input levels
• Dual trip
• Multi-turn potentiometer adj.
• Monitor jacks help setpoint adj.
• Power ON timer
• Relays can be powered 110 V DC
Typical Applications
• Annunciator
• Various alarm applications
23 (.91)
[2] SETPOINT 1 OUTPUT
1: Hi (coil energized at alarm)
3: Lo (coil energized at alarm)
Model
M2AVS
76
(2.99)
[3] SETPOINT 2 OUTPUT
1: Hi (coil energized at alarm)
3: Lo (coil energized at alarm)
124
(4.88)
mm (inch)
MODEL: M2AVS–[1][2][3][4]–[5][6]
[4] OUTPUT
2: Relay; N.O. or make contact
6: Photo MOSFET relay; N.O.
ORDERING INFORMATION
• Code number: M2AVS-[1][2][3][4]-[5][6]
Specify a code from below for each of [1] through [6].
(e.g. M2AVS-6112-R/CE/Q)
[5] POWER INPUT
AC Power
• Special input range (For codes Z, 0 & 01)
• Specify the specification for option code /Q
(e.g. /C01/S01)
M: 85 – 264 V AC (Operational voltage range 85 – 264 V,
47 – 66 Hz)
(Select ‘/N’ for ‘Standards & Approvals’ code.)
DC Power
R: 24 V DC
[1] INPUT
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
R2: 11 – 27 V DC
Current
A: 4 – 20 mA DC (Input resistance 250 Ω)
A1: 4 – 20 mA DC (Input resistance 50 Ω)
B: 2 – 10 mA DC (Input resistance 500 Ω)
C: 1 – 5 mA DC (Input resistance 1000 Ω)
D: 0 – 20 mA DC (Input resistance 50 Ω)
E: 0 – 16 mA DC (Input resistance 62.5 Ω)
F: 0 – 10 mA DC (Input resistance 100 Ω)
G: 0 – 1 mA DC (Input resistance 1000 Ω)
H: 10 – 50 mA DC (Input resistance 100 Ω)
J: 0 – 10 μA DC (Input resistance 1000 Ω)
K: 0 – 100 μA DC (Input resistance 1000 Ω)
GW: -1 – +1 mA DC (Input resistance 1000 Ω)
FW: -10 – +10 mA DC (Input resistance 100 Ω)
(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)
(Select ‘/N’ for ‘Standards & Approvals’ code.)
P: 110 V DC
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)
(Select ‘/N’ for ‘Standards & Approvals’ code.)
[6] OPTIONS (multiple selections)
Standards & Approvals (must be specified)
/N: Without CE
/CE: CE marking
Other Options
blank: none
M2AVS SPECIFICATIONS
ES-5041 Rev.11 Page 1/4
http://www.m-system.co.jp/
MODEL: M2AVS
/Q: Option other than the above (specify the specification)
For maximum relay life with inductive loads, external
protection is recommended.
■ Photo MOSFET Relay
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
Maximum switching voltage: 30 V AC or 50 V DC
Maximum switching current: 0.5 A
ON resistance: ≤ 2 kΩ
/C02: Polyurethane coating
Leakage current at OFF: ≤ 10 μA
For maximum relay life with inductive loads, external
protection is recommended.
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
Alarm Trip Operation
Terminal No. in parentheses
(5-8)ON/Hi
GENERAL SPECIFICATIONS
Construction: Plug-in
Output 1
(5-8)ON/Lo
Connection: M3 screw terminals (torque 0.8 N·m)
Screw terminal: Chromated steel (standard) or stainless
steel
(9-12)ON/Hi
Output 2
(9-12)ON/Lo
Input
(%)
Housing material: Flame-resistant resin (black)
Isolation: Input to output 1 to output 2 to power
Setpoint adjustments: Multi-turn screwdriver adjustments
(front); 0 – 100 % independently
0
▲
50
▲
100
Output 2
Setpoint
Output 1
Setpoint
Trip Operation in Power Failure: Both relays turn off.
Monitor jacks: Output 0 – 1 V for 0 – 100 % setpoints
Hysteresis (deadband): ≤ 0.5 %
INSTALLATION
Power Consumption
•AC:
Front LEDs
Output 1: Red LED turns on when the coil is energized.
Output 2: Green LED turns on when the coil is energized.
Power ON timer: Relays de-energized for approx. 1 seconds
after power is turned on.
Approx. 3 VA at 100 V
Approx. 4 VA at 200 V
Approx. 5 VA at 264 V
•DC: Approx. 3 W
INPUT SPECIFICATIONS
■ DC Current:
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Shunt resistor attached to the input terminals (0.5 W)
Specify input resistance value for code Z.
■ DC Voltage: -300 – +300 V DC
(-30 – +30 V for the input code 01. Span 30 V max.)
Minimum span: 3 mV
Weight: 150 g (0.33 lb)
PERFORMANCE in percentage of span
Setpoint monitor accuracy: ±0.5 %
Offset: Max. 1.5 times span
Temp. coefficient: ±0.05 %/°C (±0.03 %/°F)
Response time: ≤ 0.5 sec. (0 – 100 % at 90 % setpoint)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input to output 1
to output 2 to power to ground)
•Input resistance
Span 3 – 10 mV : ≥ 10 kΩ
Span 10 – 100 mV : ≥ 10 kΩ
Span 0.1 – 1 V : ≥ 100 kΩ
Span ≥ 1 V : ≥ 1 MΩ
OUTPUT SPECIFICATIONS
■ Relay Contact:
STANDARDS & APPROVALS
EU conformity:
120 V AC @0.5 A (cos ø = 1)
EMC Directive
240 V AC @0.5 A (cos ø = 1)
EMI EN 61000-6-4
30 V DC @0.5 A (resistive load)
EMS EN 61000-6-2
Maximum switching voltage: 250 V AC or 120 V DC
Maximum switching power: 120 VA or 15 W (≤ 0.5 A)
Minimum load: 5 V DC @10 mA
Low Voltage Directive
EN 61010-1
Measurement Category II (output)
Mechanical life: 5 × 10 cycles
7
M2AVS SPECIFICATIONS
ES-5041 Rev.11 Page 2/4
http://www.m-system.co.jp/
MODEL: M2AVS
Installation Category II (power)
Pollution Degree 2
Input to output to power: Basic insulation (300 V)
RoHS Directive
EN 50581
FRONT VIEW
Output 1
Monitor LED
Output 1
Setpoint Monitor (A1)
Output 2
Monitor LED
Output 2
Setpoint Monitor (A2)
COM
Output 1
Setpoint Adj.
Output 2
Setpoint Adj.
Refer to the instruction manual for detailed procedures.
EXTERNAL DIMENSIONS unit: mm (inch)
6 (.23)
DIN RAIL
35mm wide
4
1
5
8
2–4.2x5
(.17x.20)
MTG HOLE
6 (.24) deep
12
9
8–M3
SCREW
14 13
21.5 (.85) 7.3 (.29)
86.7 (3.41)
116.7 (4.59)
15 (.59)
[4 (.16)]
23 (.91)
• When mounting, no extra space is needed between units.
TERMINAL ASSIGNMENTS unit: mm (inch)
INPUT RESISTOR
(model: REM2)
4
1
5
8
12
9
14 13
Input shunt resistor attached
for current input.
M2AVS SPECIFICATIONS
ES-5041 Rev.11 Page 3/4
http://www.m-system.co.jp/
MODEL: M2AVS
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
■ Relay Protection
• AC Powered
COM. SP ADJ. A1
Inductive
Load (Coil)
5
Low Drift
Amplifier
+
–
1
4
Ry
Ry
Comparator
OUTPUT 1
LOAD
*
8
INPUT
R
U
Varistor or CR Circuit
9
• DC Powered
Inductive
Load (Coil)
Comparator
OUTPUT 2
POWER
12
13
14
SP ADJ. A2
LOAD
U(+)
V(–)
Diode, Varistor or
CR Circuit
Base Socket
*Input shunt resistor attached for current input.
Specifications are subject to change without notice.
M2AVS SPECIFICATIONS
ES-5041 Rev.11 Page 4/4
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明