M2BS-8U2/UL [MSYSTEM]
Super-mini Signal Conditioners Mini-M Series;型号: | M2BS-8U2/UL |
厂家: | M-SYSTEM |
描述: | Super-mini Signal Conditioners Mini-M Series |
文件: | 总4页 (文件大小:130K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: M2BS-8
Super-mini Signal Conditioners Mini-M Series
INSTALLATION
Power input: Refer to signal conditioner data sheet. Choose
the same power input specification for all units.
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: wall; optional DIN rail mounting available
(in horizontal direction only)
INSTALLATION BASE (8 positions)
Functions & Features
• Receiving at the maximum of 8 modules of Mini-M series
signal conditioners
• Connector output
Weight: 780 g (1.72 lb)
• Power supplied through printed wiring on the base
PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
(input to output to power to FG)
Dielectric strength: 2000 V AC @1 minute (input to output
to power to FG)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
MODEL: M2BS–8[1][2]
Low Voltage Directive
EN 61010-1
ORDERING INFORMATION
• Code number: M2BS-8[1][2]
Installation Category II
Pollution Degree 2
Specify a code from below for each of [1] and [2].
(e.g. M2BS-8U2/D/UL)
Input or output to power: Reinforced insulation (300 V)
Input to output: Basic insulation (300 V)
RoHS Directive
EN 50581
[1] FUNCTION
U1: Fujitsu FCN type I/O connector (UL not available)
Approval:
UL/C-UL nonincendive Class I, Division 2,
Groups A, B, C, and D
U2: Omron I/O connector
(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)
UL/C-UL general safety requirements
(UL 3111-1, CAN/CSA-C22.2 No.1010-1)
Voltage at the field I/O terminals (except power input
terminals) limited within 30 V DC for UL.
[2] OPTIONS (multiple selections)
Mounting
blank: Surface
/D: DIN rail mounting adaptor
Standards & Approvals
blank: Without UL
/UL: UL approval
RELATED PRODUCTS
• Connector terminal block (model: CNT)
• Special cable with 40-pin connector (model: FCN)
GENERAL SPECIFICATIONS
Capacity: 8 positions
Connection
Power input: M3 screw terminals (torque 0.8 N·m)
Input and output: M3 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel
M2BS-8 SPECIFICATIONS
ES-5006 Rev.10 Page 1/4
http://www.m-system.co.jp/
MODEL: M2BS-8
CONNECTION DIAGRAM
■ MODEL: M2BS-8U1 (Fujitsu FCN type I/O connector FCN364P040-AU)
• Connector Pin Assignment
CN1: output
PIN NO.
A1
ASSIGNMENT
ch.1 +
PIN NO.
B1
ASSIGNMENT
ch.1 –
A2
ch.2 +
B2
ch.2 –
A3
ch.3 +
B3
ch.3 –
A4
ch.4 +
B4
ch.4 –
A5
ch.5 +
B5
ch.5 –
A6
ch.6 +
B6
ch.6 –
A7
ch.7 +
B7
ch.7 –
A8
ch.8 +
B8
ch.8 –
A9 – A20, B9 – B20: Unused
■ CONNECTION DIAGRAM
CN1
1
4
5
8
Ch.1
INPUT
1
4
5
8
Ch.8
INPUT
13
14
U(+)
V(–)
POWER
FG
■ MODEL: M2BS-8U2 (Omron I/O connector XG4A-3431)
• Connector Pin Assignment
CN1: output
PIN NO.
ASSIGNMENT
ch.1 +
PIN NO.
ASSIGNMENT
ch.1 –
1
3
2
4
ch.2 +
ch.2 –
5
ch.3 +
6
ch.3 –
7
ch.4 +
8
ch.4 –
9
ch.5 +
10
12
14
16
ch.5 –
11
13
15
ch.6 +
ch.6 –
ch.7 +
ch.7 –
ch.8 +
ch.8 –
17 – 34: Unused
M2BS-8 SPECIFICATIONS
ES-5006 Rev.10 Page 2/4
http://www.m-system.co.jp/
MODEL: M2BS-8
■ CONNECTION DIAGRAM
CN1
1
4
5
8
Ch.1
INPUT
1
4
5
8
Ch.8
INPUT
13
14
U(+)
V(–)
POWER
FG
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
275 (10.83)
255 (10.04)
235 (9.25)
CONNECTOR
CN1
1
2
3
4
5
6
7
8
5 8
FG
5 8 5 8 5 8 5 8 5 8 5 8 5 8
1 4 1 4 1 4 1 4 1 4 1 4 1 4
1 4 13 14
CH8
CH1
CH7
2–M3 POWER
TERMINALS
**
CT PROTECTOR (CTM2)
6 (.24)
32–M3 INPUT TERMINALS
DIN RAIL MTG ADAPTOR
(provided only when option /D
is selected.)
DIN RAIL
DIN RAIL MTG ADAPTOR
(provided only when option /D
is selected.)
*
165 (6.50) required for pneumatic tubing for M2PV.
**Attached to M2CA and M2CE.
M2BS-8 SPECIFICATIONS
ES-5006 Rev.10 Page 3/4
http://www.m-system.co.jp/
MODEL: M2BS-8
MOUNTING REQUIREMENTS unit: mm (inch)
255 (10.04)
4–M5 SCREW
DIN RAIL*
*Installed in horizontal direction only.
Specifications are subject to change without notice.
M2BS-8 SPECIFICATIONS
ES-5006 Rev.10 Page 4/4
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明