概述
数据手册M2MS-E-R2 概述
Super-mini Signal Conditioners Mini-M Series
M2MS-E-R2 数据手册
通过下载M2MS-E-R2数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载MODEL: M2MS
Voltage
Super-mini Signal Conditioners Mini-M Series
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)
3: 0 – 1 V DC (Load resistance 1000 Ω min.)
4: 0 – 10 V DC (Load resistance 10 kΩ min.)
5: 0 – 5 V DC (Load resistance 5000 Ω min.)
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
4W: -10 – +10 V DC (Load resistance 10 kΩ min.)
5W: -5 – +5 V DC (Load resistance 5000 Ω min.)
0: Specify voltage (See OUTPUT SPECIFICATIONS)
POTENTIOMETER TRANSMITTER
Functions & Features
• Provides a DC output proportional to a potentiometer or
slidewire position input
• Constant voltage excitation allows use with pots with total
resistances from 100 Ω – 10 kΩ without affecting accuracy
• 50 % zero/span adjustments with minimal interaction
• Fast response type available
[2] POWER INPUT
AC Power
Typical Applications
• Tank levels
M: 85 – 264 V AC (Operational voltage range 85 – 264 V,
47 – 66 Hz)
• Positions
(Select ‘/N’ for ‘Standards & Approvals’ code.)
M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,
47 – 66 Hz)
23 (.91)
(90 – 264 V for UL)
Model
76
(2.99)
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
R2: 11 – 27 V DC
ZERO
SPAN
124
(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)
(Select ‘/N’ for ‘Standards & Approvals’ code.)
P: 110 V DC
(4.88)
mm (inch)
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)
(110 V ±10 % for UL)
MODEL: M2MS–[1]–[2][3]
[3] OPTIONS (multiple selections)
Response Time (0 – 90 %)
ORDERING INFORMATION
• Code number: M2MS-[1]-[2][3]
Specify a code from below for each [1] through [3].
(e.g. M2MS-A-P/K/CE/Q)
blank: Standard (≤ 0.5 sec.)
/K: Fast Response (Approx. 25 msec.)
Standards & Approvals (must be specified)
/N: Without CE or UL
• Special output range (For codes Z & 0)
• Specify the specification for option code /Q
(e.g. /C01/S01)
/CE: CE marking
/UL: UL approval, CE marking
Custom specification
INPUT
Total resistance 100 Ω – 10 kΩ
(Refer to the custom specification list for difference
of specification and combination of code numbers.)
blank: none
/X1: Upscale burnout (Total resistance: 1 - 5 kΩ)
(CE or UL not available)
[1] OUTPUT
Current
Other Options
A: 4 – 20 mA DC (Load resistance 750 Ω max.)
B: 2 – 10 mA DC (Load resistance 1500 Ω max.)
C: 1 – 5 mA DC (Load resistance 3000 Ω max.)
D: 0 – 20 mA DC (Load resistance 750 Ω max.)
E: 0 – 16 mA DC (Load resistance 900 Ω max.)
F: 0 – 10 mA DC (Load resistance 1500 Ω max.)
G: 0 – 1 mA DC (Load resistance 15 kΩ max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
blank: none
/Q: Option other than the above (specify the specification)
M2MS SPECIFICATIONS
ES-5015 Rev.22 Page 1/5
http://www.m-system.co.jp/
MODEL: M2MS
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
PERFORMANCE in percentage of span
Accuracy: ±0.1 %
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input to output
to power to ground)
/C02: Polyurethane coating
/C03: Rubber coating (UL not available)
ADJUSTMENT
/VN: Sealed adjustment holes (UL not available)
TERMINAL SCREW MATERIAL
/S01: Stainless steel (UL not available)
STANDARDS & APPROVALS
EU conformity:
GENERAL SPECIFICATIONS
Construction: Plug-in
EMC Directive
EMI EN 61000-6-4
Connection: M3 screw terminals (torque 0.8 N·m)
Screw terminal: Chromated steel (standard) or stainless
steel
EMS EN 61000-6-2
Low Voltage Directive
EN 61010-1
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
Installation Category II
Pollution Degree 2
Zero adjustment: 0 – 50 % of total resistance (front)
Span adjustment: 50 – 100 % of total resistance (front)
Input or output to power: Reinforced insulation (300 V)
Input to output: Basic insulation (300 V)
RoHS Directive
EN 50581
INPUT SPECIFICATIONS
Minimum span: 50 % of total resistance
Excitation: 0.5 V DC
Approval:
UL/C-UL nonincendive Class I, Division 2,
Groups A, B, C, and D
(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)
UL/C-UL general safety requirements
(UL 61010-1, CAN/CSA-C22.2 No.61010-1)
OUTPUT SPECIFICATIONS
■ DC Current: 0 – 20 mA DC
Minimum span: 1 mA
Offset: Max. 1.5 times span
Load resistance: Output drive 15 V max.
■ DC Voltage: -10 – +12 V DC
Minimum span: 5 mV
Offset: Max. 1.5 times span
Load resistance: Output drive 1 mA max.; at ≥ 0.5 V
INSTALLATION
Power Consumption
•AC:
Approx. 3 VA at 100 V
Approx. 4 VA at 200 V
Approx. 5 VA at 264 V
•DC: Approx. 3 W
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Weight: 150 g (0.33 lb)
M2MS SPECIFICATIONS
ES-5015 Rev.22 Page 2/5
http://www.m-system.co.jp/
MODEL: M2MS
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
6 (.23)
DIN RAIL
35mm wide
4
1
5
8
2–4.2x5
(.17x.20)
MTG HOLE
6 (.24) deep
12
9
8–M3
SCREW
14 13
21.5 (.85) 10 (.39)
84 (3.31)
114 (4.49)
15 (.59)
[4 (.16)]
23 (.91)
• When mounting, no extra space is needed between units.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
POTENTIOMETER
max.
Excitation Volt.
Generator
+
–
3
2
1
1
4
5
8
Z
S
Isolation
Low Drift
Amplifier
Output
Driver
+
–
9
OUTPUT
POWER
12
min.
13 U(+)
14 V(–)
Base Socket
Specifications are subject to change without notice.
M2MS SPECIFICATIONS
ES-5015 Rev.22 Page 3/5
http://www.m-system.co.jp/
MODEL: M2MS
CUSTOM SPECIFICATION LIST
Refer to the following pages for each detailed custom specification.
Custom specification: Option /X1
■ Major specification changes
Burnout: Upscale (Total resistance: 1 - 5 kΩ)
M2MS SPECIFICATIONS
ES-5015 Rev.22 Page 4/5
http://www.m-system.co.jp/
MODEL: M2MS
CUSTOM SPECIFICATION : OPTION /X1
Major specification changes
Burnout: Upscale (Total resistance 1 - 5 kΩ)
MODEL: M2MS–[1]–[2][3]/N/X1[3]
Same as standard specification (without customization)
except followings.
Refer to standard specification pages.
ORDERING INFORMATION
• Code number: M2MS-[1]-[2][3]/N/X1[3]
For [1] and [3] same code as standard specification is
available.
(e.g. M2MS-A-P/K/N/X1/Q)
Refer to standard specification pages.
• Specify total resistance (e.g. 1 kΩ).
SPECIFICATION CHANGES
■ Input specifications
Available input range
• Total resistance: 1 - 5 kΩ
■ PERFORMANCE
Accuracy: Refer to the table shown below.
Temp. coefficient: Refer to the table shown below.
Burnout time: ≤ 60 sec.
■ ACCURACY,TEMP. COEFFICIENT
TOTAL RESISTANCE ACCURACY TEMP. COEFFICIENT
1kΩ
±±.ꢀ2
±±.ꢀꢃ2
±±.02
±±.±02 ꢁ ꢂC
±±.±02 ꢁ ꢂC
±±.±ꢄ2 ꢁ ꢂC
1kΩ < R ≤ ꢀkΩ
ꢀkΩ < R ≤ ꢃkΩ
M2MS SPECIFICATIONS
ES-5015 Rev.22 Page 5/5
http://www.m-system.co.jp/
M2MS-E-R2 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| M2MS-E-R2/CE | MSYSTEM | Super-mini Signal Conditioners Mini-M Series | 获取价格 |
|
| M2MS-E-R2/K | MSYSTEM | Super-mini Signal Conditioners Mini-M Series | 获取价格 |
|
| M2MS-E-R2/N | MSYSTEM | Super-mini Signal Conditioners Mini-M Series | 获取价格 |
|
| M2MS-E-R2/Q | MSYSTEM | Super-mini Signal Conditioners Mini-M Series | 获取价格 |
|
| M2MS-E-R2/UL | MSYSTEM | Super-mini Signal Conditioners Mini-M Series | 获取价格 |
|
| M2MS-E-R2/X1 | MSYSTEM | Super-mini Signal Conditioners Mini-M Series | 获取价格 |
|
| M2MS-F-M2 | MSYSTEM | Super-mini Signal Conditioners Mini-M Series | 获取价格 |
|
| M2MS-F-M2/CE | MSYSTEM | Super-mini Signal Conditioners Mini-M Series | 获取价格 |
|
| M2MS-F-M2/K | MSYSTEM | Super-mini Signal Conditioners Mini-M Series | 获取价格 |
|
| M2MS-F-M2/N | MSYSTEM | Super-mini Signal Conditioners Mini-M Series | 获取价格 |
|
M2MS-E-R2 相关文章
HARTING(浩亭)圆形连接器产品选型手册
- 2024-10-31
- 6
HYCON(宏康科技)产品选型手册
- 2024-10-31
- 6
GREEGOO整流二极管和晶闸管产品选型手册
- 2024-10-31
- 7
西门子豪掷106亿美元，战略收购工程软件巨头Altair
- 2024-10-31
- 8
