M2MST-Z-R2 [MSYSTEM]
Super-mini Signal Conditioners Mini-M Series;
| 型号： | M2MST-Z-R2 |
| 厂家： | 
M-SYSTEM |
| 描述： | Super-mini Signal Conditioners Mini-M Series |
| 文件： | 总4页 (文件大小：102K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: M2MST
4W: -10 – +10 V DC (Load resistance 10 kΩ min.)
Super-mini Signal Conditioners Mini-M Series
5W: -5 – +5 V DC (Load resistance 5000 Ω min.)
0: Specify voltage (See OUTPUT SPECIFICATIONS)
PARAMETER GENERATOR
Functions & Features
[2] POWER INPUT
• Provides a constant DC signal
AC Power
• Setpoint adjustable from -10.0 to +105 %
• Easy setting with the front digital display
M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,
47 – 66 Hz)
DC Power
Typical Applications
R: 24 V DC
• Various parameter settings for computers and
DCS’s
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
R2: 11 – 27 V DC
(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)
(Select ‘/N’ for ‘Standards & Approvals’ code.)
P: 110 V DC
23 (.91)
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)
M
od
el
76
(2.99)
[3] OPTIONS (multiple selections)
Standards & Approvals (must be specified)
/N: Without CE
124
(4.88)
/CE: CE marking
mm (inch)
Other Options
blank: none
/Q: Option other than the above (specify the specification)
MODEL: M2MST–[1]–[2][3]
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
ORDERING INFORMATION
• Code number: M2MST-[1]-[2][3]
Specify a code from below for each of [1] through [3].
(e.g. M2MST-A-M2/CE/Q)
/C02: Polyurethane coating
/C03: Rubber coating
• Special output range (For codes Z & 0)
• Specify the specification for option code /Q
(e.g. /C01/S01)
TERMINAL SCREW MATERIAL
/S01: Stainless steel
GENERAL SPECIFICATIONS
Construction: Plug-in
[1] OUTPUT
Current
Connection: M3 screw terminals (torque 0.8 N·m)
Screw terminal: Chromated steel (standard) or stainless
steel
A: 4 – 20 mA DC (Load resistance 750 Ω max.)
B: 2 – 10 mA DC (Load resistance 1500 Ω max.)
C: 1 – 5 mA DC (Load resistance 3000 Ω max.)
D: 0 – 20 mA DC (Load resistance 750 Ω max.)
E: 0 – 16 mA DC (Load resistance 900 Ω max.)
F: 0 – 10 mA DC (Load resistance 1500 Ω max.)
G: 0 – 1 mA DC (Load resistance 15 kΩ max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
Housing material: Flame-resistant resin (black)
Isolation: Output to power
Overrange output: Approx. -10 to +105 % at 1 – 5 V
Output is factory set to 0%.
Zero adjustment: -5 to +5 % (front)
Span adjustment: 95 to 105 % (front)
Setpoint adjustment: -10.0 – +105 %;
0.1 % increments (1 % increments over 100 %)
Display selector: Double-throw SW (front)
UP/DOWN control: Double-throw, momentary SW (front)
■ INDICATORS
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)
3: 0 – 1 V DC (Load resistance 1000 Ω min.)
4: 0 – 10 V DC (Load resistance 10 kΩ min.)
5: 0 – 5 V DC (Load resistance 5000 Ω min.)
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
Setpoint display: Red LED; 6.4 mm (.25”) 7 segment, 3
M2MST SPECIFICATIONS
ES-5080 Rev.6 Page 1/4
http://www.m-system.co.jp/
MODEL: M2MST
digits
Polarity indicator: Dual color (red/green) LED; Red with a
positive set value; Green with a negative set value.
Power saving mode: Indicators turn off when the switches
are left untouched for 1 minute, or when the display
selector is set to the bottom position.
OUTPUT SPECIFICATIONS
■ DC Current: 0 – 20 mA DC
Minimum span: 1 mA
Offset: Max. 1.5 times span
Load resistance: Output drive 15 V max.
■ DC Voltage: -10 – +12 V DC
Minimum span: 5 mV
Offset: Max. 1.5 times span
Load resistance: Output drive 1 mA max.; at ≥ 0.5 V
INSTALLATION
Power Consumption
•AC:
Approx. 3 VA at 100 V
Approx. 4 VA at 200 V
Approx. 5 VA at 264 V
•DC: Approx. 3 W
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Weight: 150 g (0.33 lb)
PERFORMANCE in percentage of span
Setting accuracy: ±0.1 %
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @ 1 minute (output to power
to ground)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
Low Voltage Directive
EN 61010-1
Installation Category II
Pollution Degree 2
Output to power: Reinforced insulation (300 V)
RoHS Directive
EN 50581
M2MST SPECIFICATIONS
ES-5080 Rev.6 Page 2/4
http://www.m-system.co.jp/
MODEL: M2MST
EXTERNAL VIEW
(A) Polarity Indicator LED
(B) Setpoint Display
(C) Display Selector
Top: ON
Bottom: OFF
(D) UP/DOWN Control
(E) Zero Adj.
(F) Span Adj.
The front cover cannot be turned open by 180 deg.
when there is no extra space between units.
• How to Set an Output
Turn the Display Selector (C) to the top position.
The Setpoint Display (B) shows the current setpoint (-10.0 –
+105 %). Press UP/DOWN Control (D) until the display
shows a desired set value.
The Polarity Indicator LED (A) is red when the set value is in
positive range, green when in negative range.
The output is factory set to 0 %.
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm
6 (.23)
DIN RAIL
35mm wide
4
1
5
8
2–4.2x5
(.17x.20)
MTG HOLE
6 (.24) deep
12
9
8–M3
SCREW
14 13
21.5 (.85) 7.3 (.29)
86.7 (3.41)
116.7 (4.59)
15 (.59)
[4 (.16)]
23 (.91)
• When mounting, no extra space is needed between units.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
DISPLAY
SELECTOR
UP/DOWN
SW
Z
S
Isolation
Digital
Computation
Output
Driver
+
1
4
5
8
9
OUTPUT
POWER
–
12
13
14
U(+)
V(–)
Setpoint
Display
Base Socket
M2MST SPECIFICATIONS
ES-5080 Rev.6 Page 3/4
http://www.m-system.co.jp/
MODEL: M2MST
Specifications are subject to change without notice.
M2MST SPECIFICATIONS
ES-5080 Rev.6 Page 4/4
http://www.m-system.co.jp/
相关型号：
©2020 ICPDF网 联系我们和版权申明