M2WVS-21D-R/K

更新时间:2024-10-29 22:26:08
品牌:MSYSTEM
描述:Super-mini Signal Conditioners Mini-M Series

M2WVS-21D-R/K 概述

Super-mini Signal Conditioners Mini-M Series

M2WVS-21D-R/K 数据手册

通过下载M2WVS-21D-R/K数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
MODEL: M2WVS  
FW: -10 – +10 mA DC (Input resistance 100 Ω)  
Super-mini Signal Conditioners Mini-M Series  
Z: Specify current (See INPUT SPECIFICATIONS)  
Voltage  
SIGNAL TRANSMITTER  
(two isolated outputs)  
1: 0 – 10 mV DC (Input resistance 10 kΩ min.)  
(Select ‘/N’ for ‘Standards & Approvals’ code.)  
15: 0 – 50 mV DC (Input resistance 10 kΩ min.)  
16: 0 – 60 mV DC (Input resistance 10 kΩ min.)  
2: 0 – 100 mV DC (Input resistance 100 kΩ min.)  
3: 0 – 1 V DC (Input resistance 1 MΩ min.)  
4: 0 – 10 V DC (Input resistance 1 MΩ min.)  
5: 0 – 5 V DC (Input resistance 1 MΩ min.)  
6: 1 – 5 V DC (Input resistance 1 MΩ min.)  
4W: -10 – +10 V DC (Input resistance 1 MΩ min.)  
5W: -5 – +5 V DC (Input resistance 1 MΩ min.)  
0: Specify voltage (See INPUT SPECIFICATIONS)  
Functions & Features  
• Converts DC input from a sensor into a standard process  
signal  
• Fast response type available  
Typical Applications  
• Isolation between control room and field instrumentation  
29.5 (1.16)  
Mo  
del  
76  
(2.99)  
[2] OUTPUT 1  
Current  
ZE  
RO  
OUT2  
SP  
AN  
A: 4 – 20 mA DC (Load resistance 750 Ω max.)  
B: 2 – 10 mA DC (Load resistance 1500 Ω max.)  
C: 1 – 5 mA DC (Load resistance 3000 Ω max.)  
D: 0 – 20 mA DC (Load resistance 750 Ω max.)  
E: 0 – 16 mA DC (Load resistance 900 Ω max.)  
F: 0 – 10 mA DC (Load resistance 1500 Ω max.)  
G: 0 – 1 mA DC (Load resistance 15 kΩ max.)  
Z: Specify current (See OUTPUT SPECIFICATIONS)  
Voltage  
ZE  
RO  
OUT1  
SP  
AN  
124  
(4.88)  
mm (inch)  
MODEL: M2WVS–[1][2][3]–[4][5]  
ORDERING INFORMATION  
• Code number: M2WVS-[1][2][3]-[4][5]  
Specify a code from below for each of [1] through [5].  
(e.g. M2WVS-6A6-M2/K/CE/Q)  
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)  
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)  
3: 0 – 1 V DC (Load resistance 1000 Ω min.)  
4: 0 – 10 V DC (Load resistance 10 kΩ min.)  
5: 0 – 5 V DC (Load resistance 5000 Ω min.)  
6: 1 – 5 V DC (Load resistance 5000 Ω min.)  
4W: -10 – +10 V DC (Load resistance 10 kΩ min.)  
5W: -5 – +5 V DC (Load resistance 5000 Ω min.)  
0: Specify voltage (See OUTPUT SPECIFICATIONS)  
• Special input and output ranges (For codes Z & 0)  
• Specify the specification for option code /Q  
(e.g. /C01/S01)  
Note: When the user requires a current and a voltage  
output, specify the current to be the Output 1 which allows  
a greater load.  
[3] OUTPUT 2  
Y: None  
[1] INPUT  
Current  
Current  
A: 4 – 20 mA DC (Input resistance 250 Ω)  
A1: 4 – 20 mA DC (Input resistance 50 Ω)  
B: 2 – 10 mA DC (Input resistance 500 Ω)  
C: 1 – 5 mA DC (Input resistance 1000 Ω)  
D: 0 – 20 mA DC (Input resistance 50 Ω)  
E: 0 – 16 mA DC (Input resistance 62.5 Ω)  
F: 0 – 10 mA DC (Input resistance 100 Ω)  
G: 0 – 1 mA DC (Input resistance 1000 Ω)  
H: 10 – 50 mA DC (Input resistance 100 Ω)  
J: 0 – 10 μA DC (Input resistance 1000 Ω)  
K: 0 – 100 μA DC (Input resistance 1000 Ω)  
GW: -1 – +1 mA DC (Input resistance 1000 Ω)  
A: 4 – 20 mA DC (Load resistance 350 Ω max.)  
B: 2 – 10 mA DC (Load resistance 700 Ω max.)  
C: 1 – 5 mA DC (Load resistance 1400 Ω max.)  
D: 0 – 20 mA DC (Load resistance 350 Ω max.)  
E: 0 – 16 mA DC(Load resistance 430 Ω max.)  
F: 0 – 10 mA DC (Load resistance 700 Ω max.)  
G: 0 – 1 mA DC (Load resistance 7000 Ω max.)  
Z: Specify current (See OUTPUT SPECIFICATIONS)  
Voltage  
Same range availability as Output 1  
M2WVS SPECIFICATIONS  
ES-5149 Rev.1 Page 1/4  
http://www.m-system.co.jp/  
MODEL: M2WVS  
Minimum span: 3 mV  
[4] POWER INPUT  
AC Power  
Offset: Max. 1.5 times span  
Input resistance  
M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,  
Span 3 – 10 mV : ≥ 10 kΩ  
Span 10 – 100 mV : ≥ 10 kΩ  
Span 0.1 – 1 V : ≥ 100 kΩ  
Span ≥ 1 V : ≥ 1 MΩ  
47 – 66 Hz)  
DC Power  
R: 24 V DC  
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)  
R2: 11 – 27 V DC  
(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)  
(Select ‘/N’ for ‘Standards & Approvals’ code.)  
P: 110 V DC  
OUTPUT SPECIFICATIONS  
DC Current: 0 – 20 mA DC  
Minimum span: 1 mA  
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)  
Offset: Max. 1.5 times span  
Load resistance: Output drive 15 V max. for Output 1;  
7 V max. for Output 2  
[5] OPTIONS (multiple selections)  
Response Time (0 – 90 %)  
blank: Standard (≤ 0.5 sec.)  
DC Voltage: -10 – +12 V DC (up to 10 V for Output 2)  
Minimum span: 5 mV  
Offset: Max. 1.5 times span  
/K: Fast Response (Approx. 25 msec.)  
Standards & Approvals (must be specified)  
/N: Without CE  
Load resistance: Output drive 1 mA max.; at ≥ 0.5 V  
/CE: CE marking  
INSTALLATION  
Power consumption  
Other Options  
blank: none  
AC:  
/Q: Option other than the above (specify the specification)  
≤ 3 VA at 100 V  
≤ 4 VA at 200 V  
≤ 5 VA at 264 V  
SPECIFICATIONS OF OPTION: Q (multiple selections)  
COATING (For the detail, refer to M-System's web site.)  
/C01: Silicone coating  
DC: ≤ 3 W  
Operating temperature: -5 to +55°C (23 to 131°F)  
Operating humidity: 10 to 85 %RH (non-condensing)  
Mounting: Surface or DIN rail  
Weight: 150 g (0.33 lb)  
/C02: Polyurethane coating  
/C03: Rubber coating  
TERMINAL SCREW MATERIAL  
/S01: Stainless steel  
PERFORMANCE in percentage of span  
Accuracy: ±0.1 %  
GENERAL SPECIFICATIONS  
Construction: Plug-in  
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)  
Line voltage effect: ±0.1 % over voltage range  
Insulation resistance: ≥ 100 MΩ with 500 V DC  
Dielectric strength: 2000 V AC @1 minute (input to output  
1 to output 2 to power to ground)  
Connection: M3 screw terminals (torque 0.8 N·m)  
Screw terminal: Chromated steel (standard) or stainless  
steel  
Housing material: Flame-resistant resin (black)  
Isolation: Input to output 1 to output 2 to power  
Overrange output: Approx. -10 to +120 % at 1 – 5 V  
Zero adjustment: -5 to +5 % (front)  
STANDARDS & APPROVALS  
EU conformity:  
(No output less than 0 mA for codes D, E, F)  
Span adjustment: 95 to 105 % (front)  
Adjustable individually for each output 1 and output 2.  
EMC Directive  
EMI EN 61000-6-4  
EMS EN 61000-6-2  
Low Voltage Directive  
EN 61010-1  
INPUT SPECIFICATIONS  
DC Current:  
Measurement Category II (input)  
Installation Category II (power)  
Pollution Degree 2  
Shunt resistor attached to the input terminals (0.5 W)  
Specify input resistance value for code Z.  
DC Voltage: -300 – +300 V DC  
Input to power input: Reinforced insulation (300 V)  
M2WVS SPECIFICATIONS  
ES-5149 Rev.1 Page 2/4  
http://www.m-system.co.jp/  
MODEL: M2WVS  
Output 1 or output 2 to power input: Basic insulation (300  
V)  
Input to output 1 to output 2: Basic insulation (300 V)  
RoHS Directive  
EN 50581  
EXTERNAL VIEW  
ZERO  
Zero Adj.  
OUT2  
Output 2  
SPAN  
Span Adj.  
ZERO  
Zero Adj.  
OUT1  
Output 1  
SPAN  
Span Adj.  
EXTERNAL DIMENSIONS unit: mm (inch)  
6 (.24)  
DIN RAIL  
35mm wide  
3
2
5
1
4
6
2–4.2x5  
(.17x.20)  
MTG HOLE  
6 (.24) deep  
9
8
7
11–M3  
SCREW  
11 10  
21.5 (.85) 10 (.39)  
84 (3.31)  
114 (4.49)  
22 (.87)  
[4 (.16)]  
29.5 (1.16)  
• When mounting, no extra space is needed between units.  
TERMINAL ASSIGNMENTS unit: mm (inch)  
INPUT RESISTOR  
(model: REM2)  
3
2
5
1
4
6
9
8
7
11 10  
Input shunt resistor attached  
for current input.  
M2WVS SPECIFICATIONS  
ES-5149 Rev.1 Page 3/4  
http://www.m-system.co.jp/  
MODEL: M2WVS  
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM  
Z
S
Isolation  
Low Drift  
Amplifier  
Output  
Driver  
+
1
2
4
5
9
7
8
+
*
INPUT  
R
OUTPUT 1  
Z
S
Output  
Driver  
3
6
+
OUTPUT 2  
POWER  
10  
11  
U(+)  
V(–)  
Base Socket  
* Input shunt resistor attached for current input.  
Note: The section enclosed by broken line is only with 2nd output option.  
Specifications are subject to change without notice.  
M2WVS SPECIFICATIONS  
ES-5149 Rev.1 Page 4/4  
http://www.m-system.co.jp/  

M2WVS-21D-R/K 相关器件

型号 制造商 描述 价格 文档
M2WVS-21D-R2 MSYSTEM Super-mini Signal Conditioners Mini-M Series 获取价格
M2WVS-21D-R2/CE MSYSTEM Super-mini Signal Conditioners Mini-M Series 获取价格
M2WVS-21D-R2/K MSYSTEM Super-mini Signal Conditioners Mini-M Series 获取价格
M2WVS-21Y-M2 MSYSTEM Super-mini Signal Conditioners Mini-M Series 获取价格
M2WVS-21Y-M2/CE MSYSTEM Super-mini Signal Conditioners Mini-M Series 获取价格
M2WVS-21Y-M2/K MSYSTEM Super-mini Signal Conditioners Mini-M Series 获取价格
M2WVS-21Y-M2/Q MSYSTEM Super-mini Signal Conditioners Mini-M Series 获取价格
M2WVS-21Y-P MSYSTEM Super-mini Signal Conditioners Mini-M Series 获取价格
M2WVS-21Y-P/CE MSYSTEM Super-mini Signal Conditioners Mini-M Series 获取价格
M2WVS-21Y-P/K MSYSTEM Super-mini Signal Conditioners Mini-M Series 获取价格

M2WVS-21D-R/K 相关文章

  • HARTING(浩亭)圆形连接器产品选型手册
    2024-10-31
    6
  • HYCON(宏康科技)产品选型手册
    2024-10-31
    6
  • GREEGOO整流二极管和晶闸管产品选型手册
    2024-10-31
    7
  • 西门子豪掷106亿美元,战略收购工程软件巨头Altair
    2024-10-31
    8