M3SRS-14-AD/BL [MSYSTEM]
Super-space-saving Signal Conditioners M3S-UNIT Series;![M3SRS-14-AD/BL](http://pdffile.icpdf.com/pdf2/p00353/img/icpdf/M3SRS-1B-M2-_2172626_icpdf.jpg)
型号: | M3SRS-14-AD/BL |
厂家: | ![]() |
描述: | Super-space-saving Signal Conditioners M3S-UNIT Series |
文件: | 总3页 (文件大小:102K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: M3SRS
6: Ni 508.4 Ω
Super-space-saving Signal Conditioners
M3S-UNIT Series
(Usable range: -50 to +200°C, -58 to +392°F; min.span: 30°C, 54°F)
0: Specify
Note: Consult M-System for 2-wire RTD
RTD TRANSMITTER
Functions & Features
[2] OUTPUT
Current
• Accepts direct input from an RTD and provides a standard
process signal
A: 4 – 20 mA DC (Load resistance 550 Ω max.)
B: 2 – 10 mA DC (Load resistance 1100 Ω max.)
C: 1 – 5 mA DC (Load resistance 2200 Ω max.)
D: 0 – 20 mA DC (Load resistance 550 Ω max.)
E: 0 – 16 mA DC (Load resistance 680 Ω max.)
F: 0 – 10 mA DC (Load resistance 1100 Ω max.)
G: 0 – 1 mA DC (Load resistance 11 kΩ max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
• Linearization
• Burnout protection
• Universal AC/DC power input
• Fast response type available
• High-density mounting
• Power indicator LED
Typical Applications
• Long distance transmission between the RTD and the
transmitter
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)
3: 0 – 1 V DC (Load resistance 1000 Ω min.)
4: 0 – 10 V DC (Load resistance 10 kΩ min.)
5: 0 – 5 V DC (Load resistance 5000 Ω min.)
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
4W: -10 – +10 V DC (Load resistance 10 kΩ min.)
5W: -5 – +5 V DC (Load resistance 5000 Ω min.)
0: Specify voltage (See OUTPUT SPECIFICATIONS)
• Combination with intrinsic safety barriers
12 (.47)
106
(4.17)
[3] POWER INPUT
AC Power
110.5 (4.35)
mm (inch)
M2: 100 – 240 V AC (Operational voltage range 90 – 264 V,
47 – 66 Hz)
DC Power
MODEL: M3SRS–[1][2]–[3][4]
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Universal
ORDERING INFORMATION
• Code number: M3SRS-[1][2]-[3][4]
Specify a code from below for each [1] through [4].
(e.g. M3SRS-4A-R/K/BL/Q)
AD: 100 – 240 V AC / 24 – 240 V DC (universal)
(Operational voltage range 90 - 264 V AC, 47 - 66 Hz /
21.6 - 264 V DC, ripple 10 %p-p max.)
• Temperature range (e.g. 0 – 500°C)
• Special output range (For codes Z & 0)
• Specify the specification for option code /Q
(e.g. /C01)
[4] OPTIONS (multiple selections)
Response Time (0 – 90 %)
blank: Standard (≤ 0.5 sec.)
/K: Fast Response (Approx. 25 msec.)
Burnout
[1] INPUT RTD (2- or 3-wire)
1: JPt 100 (JIS'89)
blank: Upscale burnout
/BL: Downscale burnout
(Usable range: -200 to +500°C, -328 to +932°F; min.span: 50°C, 90°F)
3: Pt 100 (JIS'89)
Other Options
blank: none
(Usable range: -200 to +650°C, -328 to +1202°F; min.span: 50°C, 90°F)
4: Pt 100 (JIS'97, IEC)
/Q: Option other than the above (specify the specification)
(Usable range: -200 to +850°C, -328 to +1562°F; min.span: 50°C, 90°F)
5: Pt 50 Ω (JIS'81)
(Usable range: -200 to +500°C, -328 to +932°F; min.span: 100°C, 180°F)
M3SRS SPECIFICATIONS
ES-7712 Rev.6 Page 1/3
http://www.m-system.co.jp/
MODEL: M3SRS
Insulation resistance: ≥ 100 MΩ with 500 V DC
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
Dielectric strength: 2000 V AC @1 minute (input to output
to power to ground)
/C02: Polyurethane coating
/C03: Rubber coating
STANDARDS & APPROVALS
EU conformity:
EMC Directive
GENERAL SPECIFICATIONS
Construction: Small-sized front terminal structure
EMI EN 61000-6-4
EMS EN 61000-6-2
Connection: Euro type connector terminal
Low Voltage Directive
EN 61010-1
Applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm
2
Housing material: Flame-resistant resin (gray)
Isolation: Input to output to power
Installation Category II
Pollution Degree 2
Overrange output: Approx. -10 to +120 % at 1 – 5 V
Zero adjustment: -2 to +2 % (front)
Input or output to power: Reinforced insulation (300 V)
Input to output: Basic insulation (300 V)
RoHS Directive
Span adjustment: 98 to 102 % (front)
Burnout: Upscale standard;downscale optional
Linearization: Standard
EN 50581
Power LED: Green light turns on when the power is supplied.
INPUT SPECIFICATIONS
Maximum leadwire resistance: 200 Ω per wire (3-wire)
Sensing current: 1.3 mA (Pt); 0.7 mA (Ni 508.4 Ω)
OUTPUT SPECIFICATIONS
■ DC Current: 0 – 20 mA DC
Minimum span: 1 mA
Offset: Max. 1.5 times span
Load resistance: Output drive 11 V max.
■ DC Voltage: -10 – +11 V DC
Minimum span: 5 mV
Offset: Max. 1.5 times span
Load resistance: Output drive 1 mA maximum; at ≥ 0.5 V
INSTALLATION
Power consumption
•AC:
Approx. 2 VA at 100 V
Approx. 3 VA at 200 V
Approx. 4 VA at 264 V
•DC: Approx. 1 W
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: DIN rail
Weight: 100 g (3.53 oz)
PERFORMANCE in percentage of span
Accuracy: ±0.2 %
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Burnout response: ≤ 10 sec.
Line voltage effect: ±0.1 % over voltage range
M3SRS SPECIFICATIONS
ES-7712 Rev.6 Page 2/3
http://www.m-system.co.jp/
MODEL: M3SRS
EXTERNAL VIEW
Power LED
Zero Adj.
Span Adj.
1
3
2
4
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
7
5
8
6
DIN RAIL
35mm wide
1
3
2
4
12
(.47)
110.5 (4.35)
[5 (.20)]
• When mounting, no extra space is needed between units.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Burnout
RTD
A
B
B
1
2
4
3
Z
S
Isolation
Reference
Resistor
+
Differential
Amplifier
Voltage
Amplifier
Output
Driver
–
+
–
5
6
OUTPUT
POWER
Constant Constant
Current Current
POWER LED
Linearizer
U(+)
V(–)
7
8
Specifications are subject to change without notice.
M3SRS SPECIFICATIONS
ES-7712 Rev.6 Page 3/3
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明