M5CTC-1504W-M/Q
更新时间:2024-09-18 22:49:11
品牌:MSYSTEM
描述:Super-mini Terminal Block Signal Conditioners M5-UNIT
M5CTC-1504W-M/Q 概述
Super-mini Terminal Block Signal Conditioners M5-UNIT
M5CTC-1504W-M/Q 数据手册
通过下载M5CTC-1504W-M/Q数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载MODEL: M5CTC
40: 0 – 40 A AC
Super-mini Terminal Block Signal Conditioners M5-UNIT
50: 0 – 50 A AC
60: 0 – 60 A AC
CT TRANSMITTER
75: 0 – 75 A AC
(clamp-on current sensor)
100: 0 – 100 A AC
125: 0 – 125 A AC
150: 0 – 150 A AC
175: 0 – 175 A AC
200: 0 – 200 A AC
225: 0 – 225 A AC
250: 0 – 250 A AC
300: 0 – 300 A AC
350: 0 – 350 A AC
400: 0 – 400 A AC
500: 0 – 500 A AC
Functions & Features
• Converts an alternating current into a standard process
signal
• Easy-to-install clamp-on type current sensor without
needing a current transformer
• Clamp-on current sensor included
• Wide input range from 10 A up to 600 A
• True RMS sensing
• High-density mounting
• Power LED
600: 0 – 600 A AC (Not selectable with the sensor type
code 1 'Leadwire type CLSA')
Typical Applications
• Centralized monitoring and control of motors at a
supervisory panel
[3] OUTPUT
Current
• Monitoring abnormal load current at motors to detect
pump malfunctions
A: 4 – 20 mA DC (Load resistance 550 Ω max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
25 (.98)
4: 0 – 10 V DC (Load resistance 1000 Ω min.)
5: 0 – 5 V DC (Load resistance 500 Ω min.)
6: 1 – 5 V DC (Load resistance 500 Ω min.)
4W: -10 – +10 V DC (Load resistance 8000 Ω min.)
5W: -5 – +5 V DC (Load resistance 4000 Ω min.)
0: Specify voltage (See OUTPUT SPECIFICATIONS)
97
(3.82)
41 (1.61)
mm (inch)
[4] POWER INPUT
AC Power
MODEL: M5CTC–[1][2][3]–[4][5]
M: 85 – 264 V AC (Operational voltage range 85 – 264 V,
47 – 66 Hz)
ORDERING INFORMATION
• Code number: M5CTC-[1][2][3]-[4][5]
Specify a code from below for each [1] through [5].
(e.g. M5CTC-150A-R/Q)
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
• Special output range (For codes Z & 0)
• Specify the specification for option code /Q
(e.g. /C01/S01)
[5] OPTIONS
blank: none
/Q: With options (specify the specification)
[1] SENSOR
1: Leadwire type CLSA
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
2: Screw terminal type CLSB
/C02: Polyurethane coating
[2] INPUT
10: 0 – 10 A AC
15: 0 – 15 A AC
20: 0 – 20 A AC
30: 0 – 30 A AC
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
M5CTC SPECIFICATIONS
ES-2486 Rev.6 Page 1/5
http://www.m-system.co.jp/
MODEL: M5CTC
accuracy of engagement at the clamp connection.
ACCESSORIES
Note 2: The sensor is detachable up to 100 times (approx.).
Note 3: The sensor’s mechanical construction may cause it
to generate resonance sound. However, it does not affect
the performance of the sensor.
The clamp-on current sensor is included in the product
package.
■ CLAMP-ON CURRENT SENSOR (leadwire type CLSA)
• 0 – 10 A through 0 – 75 A Use
Sensor model No.: CLSA-08
Sensor cable model No.: CLSA-08C-30
Applicable cable diameter: Max. 10.0
Sensor leadwire: AWG 22
GENERAL SPECIFICATIONS
Construction: Terminal block
Connection: M3.5 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel (standard) or stainless
steel
Weight: 45 g (1.6 oz)
• 0 – 100 A Use
Sensor model No.: CLSA-12
Housing material: Flame-resistant resin (black)
Isolation: Sensor core to input or output to power
Input waveform
Sensor cable model No.: CLSA-08C-30
Applicable cable diameter: Max. 16.0
Sensor leadwire: AWG 22
RMS sensing: Up to 15 % of 3rd harmonic content
Overrange output: Approx. 0 to 110 % at 1 – 5 V
Zero adjustment: -2 to +2 % (front)
Weight: 70 g (2.5 oz)
• 0 – 125 A through 0 – 300 A Use
Sensor model No.: CLSA-30
Span adjustment: 98 to 102 % (front)
Power LED: Green LED turns on when the power is supplied.
Applicable cable diameter: Max. 24.0
Sensor leadwire: AWG 18, 200 mm
Weight: 200 g (7.1 oz)
INPUT SPECIFICATIONS
Frequency: 50 / 60 Hz
• 0 – 350 A through 0 – 500 A Use
Sensor model No.: CLSA-50
Overload capacity
Applicable cable diameter: Max. 36.0
Sensor leadwire: AWG 18, 200 mm
Weight: 300 g (10.6 oz)
CLSA - 08: 120 A continuous
CLSA - 12: 300 A continuous
CLSA - 30: 360 A continuous
CLSA - 50: 600 A continuous
CLSB - 05: 100 A continuous
CLSB - 10: 200 A continuous
CLSB - 20: 300 A continuous
CLSB - 40: 600 A continuous
CLSB - 60: 720 A continuous
Operational range: 5 – 120 % of rating
Be sure that the input voltage is of 440 V or less.
■ CLAMP-ON CURRENT SENSOR (screw terminal type CLSB)
Connection: M3 screw terminal (torque 0.5 N·m)
Screw terminal: Nickel-plated steel
Output wiring: Use AWG22 or thicker wires for the output.
Twist the paired wires, extendable up to 30 meters.
• 0 – 10 A through 0 – 50 A Use
Sensor model No.: CLSB-05
Applicable cable diameter: Max. 10.0
Weight: 45 g (1.6 oz)
• 0 – 60 A through 0 – 100 A Use
Sensor model No.: CLSB-10
OUTPUT SPECIFICATIONS
■ DC Current: 0 – 20 mA DC
Minimum span: 1 mA
Applicable cable diameter: Max. 16.0
Weight: 80 g (2.8 oz)
• 0 – 125 A through 0 – 200 A Use
Sensor model No.: CLSB-20
Offset: Max. 1.5 times span
Load resistance: Output drive 11 V max.
■ DC Voltage: 0 – 10 V DC
Applicable cable diameter: Max. 24.0
Weight: 200 g (7.1 oz)
Minimum span: 1 V
• 0 – 225 A through 0 – 400 A Use
Sensor model No.: CLSB-40
Offset: Max. 1.5 times span
Load resistance: Output drive 10 mA max.; at ≥ 1 V
Applicable cable diameter: Max. 35.0
Weight: 300 g (10.6 oz)
• 0 – 500 A through 0 – 600 A Use
Sensor model No.: CLSB-60
Applicable cable diameter: Max. 35.0
Weight: 360 g (12.7 oz)
Note 1: The output values may vary depending on the
M5CTC SPECIFICATIONS
ES-2486 Rev.6 Page 2/5
http://www.m-system.co.jp/
MODEL: M5CTC
INSTALLATION
Power Consumption
•AC:
Approx. 2 VA at 100 V
Approx. 3 VA at 200 V
Approx. 3 VA at 264 V
•DC: Approx. 2 W
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 0 to 90 %RH (non-condensing)
Mounting: DIN rail
Weight: 80 g (2.8 oz)
PERFORMANCE in percentage of span
Accuracy: ±0.5 % with input 5 – 100 %
(Input 10 – 100 % for the output codes 4W and 5W)
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: ≤ 0.5 sec. (0 – 90 %)
Ripple: 0.5 %p-p max.
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength
DC powered:
2000 V AC @1 minute (input or output to power to ground)
1000 V AC @1 minute (sensor core to sensor output)
AC powered:
1500 V AC @1 minute (input or output to power to ground)
1000 V AC @1 minute (sensor core to sensor output)
FRONT VIEW
1
2
Power LED
3
4
Span Adj.
Zero Adj.
5
6
7
8
M5CTC SPECIFICATIONS
ES-2486 Rev.6 Page 3/5
http://www.m-system.co.jp/
MODEL: M5CTC
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
7.3 (.29)
8–M3.5 SCREW
1
2
4
DIN RAIL
35mm wide
3
5
6
8
7
25 (.98)
41 (1.61)
[3.3 (.13)]
• When mounting, no extra space is needed between units.
■ Sensor model No.: CLSA-08
■ Sensor model No.: CLSA-50
41 (1.61)
10 (.39)
150 (5.91)
3000 (118)
80 (3.15)
50 (1.97)
200 (7.87)
36 (1.41)
dia.
26 (1.02)
27 (1.05)
4
38 (1.50)
4
dia.
(.16)
(.16)
k
l
k
L
K
■ Sensor model No.: CLSA-12
l
K
L
44.5 (1.75)
16 (.63)
150 (5.91)
3000 (118)
■ Sensor model No.: CLSB-05
30 (1.18)
dia.
31 (1.22)
8.6 26.3 (1.04) 8.6
48 (1.89)
(.34)
(.34)
2–M3 SCREW
l
10 dia. (.39)
l
l
k
k
k
L
K
■ Sensor model No.: CLSA-30
K
L
TERMINAL COVER
(detachable)
64 (2.52)
200 (7.87)
24 (.94)
4
34 (1.34)
4
dia.
40 (1.57)
(.16)
(.16)
■ Sensor model No.: CLSB-10
k
7.5 30.5 (1.20) 7.5
53.7 (2.11)
(.30)
(.30)
2–M3 SCREW
16 dia. (.63)
l
k
l
K
L
l
k
K
L
TERMINAL COVER
(detachable)
M5CTC SPECIFICATIONS
ES-2486 Rev.6 Page 4/5
http://www.m-system.co.jp/
MODEL: M5CTC
■ Sensor model No.: CLSB-20
8.3
(.33)
35.9
(1.41)
8.3
(.33)
75.7 (2.98)
2–M3 SCREW
24 dia. (.94)
l
l
k
k
K
L
TERMINAL COVER
(detachable)
■ Sensor model No.: CLSB-40
8.8 35.5
8.8
(.35)
93 (3.66)
2–M3 SCREW
(.35)
(1.40)
35 dia. (1.38)
l
l
k
k
K
L
TERMINAL COVER
(detachable)
■ Sensor model No.: CLSB-60
8.8 35.5
8.8
(.35)
93 (3.66)
(.35)
(1.40)
2–M3 SCREW
35 dia. (1.38)
l
l
k
k
K
L
TERMINAL COVER
(detachable)
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
SOURCE
Z
S
CONNECTOR*
k
l
Low Drift
Amplifier
RMS
Operation
Output
Driver
3
4
5
6
+
–
(A)
OUTPUT
POWER
CLAMP-ON SENSOR
( )
POWER LED
1
2
7
8
U(+)
V(–)
LOAD
*Connector provided only for the CLSA-08 and CLSA-12.
Specifications are subject to change without notice.
M5CTC SPECIFICATIONS
ES-2486 Rev.6 Page 5/5
http://www.m-system.co.jp/
M5CTC-1504W-M/Q 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
M5CTC-1504W-R | MSYSTEM | Super-mini Terminal Block Signal Conditioners M5-UNIT | 获取价格 | |
M5CTC-1504W-R/Q | MSYSTEM | Super-mini Terminal Block Signal Conditioners M5-UNIT | 获取价格 | |
M5CTC-1505-M | MSYSTEM | Super-mini Terminal Block Signal Conditioners M5-UNIT | 获取价格 | |
M5CTC-1505-M/Q | MSYSTEM | Super-mini Terminal Block Signal Conditioners M5-UNIT | 获取价格 | |
M5CTC-1505-R | MSYSTEM | Super-mini Terminal Block Signal Conditioners M5-UNIT | 获取价格 | |
M5CTC-1505-R/Q | MSYSTEM | Super-mini Terminal Block Signal Conditioners M5-UNIT | 获取价格 | |
M5CTC-1505W-M | MSYSTEM | Super-mini Terminal Block Signal Conditioners M5-UNIT | 获取价格 | |
M5CTC-1505W-M/Q | MSYSTEM | Super-mini Terminal Block Signal Conditioners M5-UNIT | 获取价格 | |
M5CTC-1505W-R | MSYSTEM | Super-mini Terminal Block Signal Conditioners M5-UNIT | 获取价格 | |
M5CTC-1505W-R/Q | MSYSTEM | Super-mini Terminal Block Signal Conditioners M5-UNIT | 获取价格 |
M5CTC-1504W-M/Q 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6