M60SYV-4W4W-R [MSYSTEM]
Base-free Interconnecting Ultra-Slim Signal Conditioners M60S Series;
| 型号： | M60SYV-4W4W-R |
| 厂家： | 
M-SYSTEM |
| 描述： | Base-free Interconnecting Ultra-Slim Signal Conditioners M60S Series |
| 文件： | 总3页 (文件大小：164K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: M60SYV
Base-free Interconnecting Ultra-Slim Signal Conditioners M60S Series
[3] OPTIONS (multiple selections)
Response Time (0 – 90 %)
blank: Standard response (≤ 0.5 sec.)
/K: Fast Response (≤ 5 msec.)
Other Options
ISOLATOR
Functions & Features
• Converts DC input from a sensor into a standard process
signal
blank: none
/Q: Option other than the above (specify the specification)
• Power connector for interconnecting modules and
collectively supplying power
• Spring clamp connection for easy wiring
• 6-mm wide ultra-slim design
• Low profile allows mounting in a 120-mm deep panel
• High-density mounting
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
• Power indicator LED
8 (.31)
GENERAL SPECIFICATIONS
Connection
Input and output: Spring clamp terminal
Power input: Via the power connector or the spring clamp
terminal
108 (4.25)
Applicable wire size: 0.2 to 1.5 mm , stripped length 8 mm
2
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
102 (4.02)
Zero adjustment: -2 to +2 % (front)
(Output code 4W: Adjustable at 0 V.)
Span adjustment: 98 to 102 % (front)
Power LED: Green LED turns on when the power is supplied.
MODEL: M60SYV-[1][2]-R[3]
INPUT SPECIFICATIONS
■ DC Current: Input resistor incorporated
ORDERING INFORMATION
• Code number: M60SYV-[1][2]-R[3]
Specify a code from below for each of [1] through [3].
(e.g. M60SYV-4W4W-R/K/Q)
INSTALLATION
Power consumption: Max. 0.6 W
• Specify the specification for option code /Q
(e.g. /C01)
Power input: Max. 3 A (Total current consumed by the
interconnected signal conditionerse must be 3 A or less.)
Operating temperature: -20 to +55°C (-4 to +131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: DIN rail
[1] INPUT / [2] OUTPUT
AA: 4 - 20 mA DC (Input resistance 50 Ω)
/ 4 - 20 mA DC (Load resistance 550 Ω max.)
A6: 4 - 20 mA DC (Input resistance 50 Ω)
/ 1 - 5 V DC (Load resistance 5000 Ω min.)
6A: 1 – 5 V DC (Input resistance 1 MΩ min.)
/ 4 - 20 mA DC (Load resistance 550 Ω max.)
66: 1 - 5 V DC (Input resistance 1 MΩ min.)
/ 1 - 5 V DC (Load resistance 5000 Ω min.)
4W4W: -10 - +10 V DC (Input resistance 1 MΩ min.)
/ -10 - +10 V DC (Load resistance 20 kΩ min.)
Weight: 65 g (2.3 oz)
PERFORMANCE in percentage of span
Accuracy: ±0.1 %
Temp. coefficient: ±0.01 %/°C (±0.006 %/°F)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @1 minute (input to output
to power to ground)
POWER INPUT
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
M60SYV SPECIFICATIONS
ES-8021 Rev.0 Page 1/3
http://www.m-system.co.jp/
MODEL: M60SYV
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
EXTERNAL VIEW
■ FRONT VIEW (With the front cover removed)
Power LED
Zero adj.
Span adj.
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
(Test lead pin 1 dia.)
5
6
7
8
DIN rail
(35mm wide)
1
2
3
4
2.1 (.08)
6 (.24)
2 (.08)
0.5 (.02)
3.7 (.15)
6 (.24)
102 (4.02)
● With the end cover attached
• Capable of High-density mounting
M60SYV SPECIFICATIONS
ES-8021 Rev.0 Page 2/3
http://www.m-system.co.jp/
MODEL: M60SYV
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Z
S
Isolation
Output
Driver
Low Drift
Amplifier
+
−
+
−
1
2
3
4
5
6
*
INPUT
OUTPUT
POWER
Power LED
+
−
7
8
POWER
* Input shunt resistor incorporated for current input.
Specifications are subject to change without notice.
M60SYV SPECIFICATIONS
ES-8021 Rev.0 Page 3/3
http://www.m-system.co.jp/
相关型号：
©2020 ICPDF网 联系我们和版权申明