M6DXR-5Z1-R/Q [MSYSTEM]

Euro Terminal Ultra-Slim Signal Conditioners M6D Series;


型号：	M6DXR-5Z1-R/Q
厂家：	M-SYSTEM
描述：	Euro Terminal Ultra-Slim Signal Conditioners M6D Series
文件：	总4页 (文件大小：135K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M6DXR

9: Cu 10 @25°C

Euro Terminal Ultra-Slim Signal Conditioners M6D Series

(Usable range: -50 to +250°C, -58 to +482°F; min.span: 20°C, 36°F)

0: Specify (Please provide a resistance table.)

RTD TRANSMITTER

(PC programmable)

(Configurator software is used to change the input type and

range.

Functions & Features

• 5.9-mm wide ultra-slim design

• Low profile allows the M6D module mounted in a 120-mm

deep panel

Input code 7, 0 cannot be switched to/from other input

types while its temperature range can be changed. It is not

available to switch from input code 1, 3, 4, 5, and 9 to '7' or

'0'. Be aware above.)

• Accepts direct input from an RTD and provides an

isolated, linearized DC signal

• Linearization and burnout protection

• PC programmable

[2] OUTPUT

Current

• High-density mounting

Z1: Range 0 – 20 mA DC

• Power indicator LED

Voltage

V2: Range -10 – +10 V DC

5.9 (.23)

V3: Range -5 – +5 V DC

(Configurator software is used to change output over the

described range of the selected suffix code.

For changing between suffix codes, set the Output Range

Selector on the side of unit before software adjustment.)

(3.70)

POWER INPUT

DC Power

102

(4.02)

mm (inch)

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS (multiple selections)

Standards & Approvals

MODEL: M6DXR–[1][2]–R[3]

blank: CE marking

/UL: UL approval, CE marking

Other Options

ORDERING INFORMATION

• Code number: M6DXR-[1][2]-R[3]

Specify a code from below for each [1] through [3].

(e.g. M6DXR-4Z1-R/UL/Q)

blank: none

/Q: Option other than the above (specify the specification)

• Temperature range (e.g. 0 – 100°C)

• Output range (e.g. 4 – 20 mA DC)

• Specify the specification for option code /Q

(e.g. /C01/SET)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

EX-FACTORY SETTING

[1] INPUT RTD

/SET: Preset according to the Ordering Information Sheet

(No. ESU-7833)

1: JPt 100 (JIS'89)

(Usable range: -200 to +500°C, -328 to +932°F; min.span: 20°C, 36°F)

3: Pt 100 (JIS'89)

(Usable range: -200 to +650°C, -328 to +1202°F; min.span: 20°C, 36°F)

4: Pt 100 (JIS'97, IEC)

RELATED PRODUCTS

• PC configurator software (model: M6CFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

(Usable range: -200 to +850°C, -328 to +1562°F; min.span: 20°C, 36°F)

5: Pt 50 Ω (JIS'81)

(Usable range: -200 to +649°C, -328 to +1200°F; min.span: 20°C, 36°F)

7: Pt 1000

(Usable range: -200 to +850°C, -328 to +1562°F; min.span: 20°C, 36°F)

M6DXR SPECIFICATIONS

ES-7833 Rev.14 Page 1/4

http://www.m-system.co.jp/

MODEL: M6DXR

Code V2 (wide spans)

GENERAL SPECIFICATIONS

Connection

Output range: -10 – +10 V DC

Conformance range: -10.4 – +10.4 V DC

Minimum span: 1 V

Input and output: Euro terminal (torque 0.3 N·m)

Power input: Via the Installation Base (model: M6DBS)

or Euro terminal (torque 0.3 N·m)

Code V3 (narrow spans)

Output range: -5 – +5 V DC

Applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm

Conformance range: -5.2 – +5.2 V DC

Minimum span: 0.5 V

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

Overrange output: -2 – +102 %

(Negative current output is not available.)

Zero adjustment: -2 to +2 % (PC programming)

Span adjustment: 98 to 102 % (PC programming)

Burnout: Upscale standard; downscale or no burnout

optional by programming

Load resistance: Output drive 1 mA max.

(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])

If not specified, the output range is shown below.

V2: 0 – 10 V DC

Linearization: Standard

V3: 1 – 5 V DC

Power LED: Green light turns on when the power is supplied.

Status indicator LED: Orange LED; Blinking patterns indicate

different operating status of the transmitter.

Programming: Downloaded from PC; input type and range,

output type and range, zero and span, burnout type, user’s

linearization table, sensor wires, temperature unit, response

characteristics (version 1.30 or later), filter time constant,

etc.

INSTALLATION

Power consumption: Approx. 0.5 W

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6DBS) or DIN rail

Weight: 65 g (2.3 oz)

For detailed information on the For detailed information,

refer to the users manual for the PC configurator.

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

PERFORMANCE in percentage of span

Overall accuracy: Input accuracy + output accuracy

Inversely proportional to the span.

See CALCULATION EXAMPLES OF OVERALL ACURACY.

• Input accuracy: (whichever is greater)

INPUT SPECIFICATIONS

Input: 2-, 3- or 4-wire RTD

±0.1 % of input range or ±0.15°C (Pt and JPt)

±0.1 % of input range or ±1°C (Cu 10)

Maximum leadwire resistance: 10 Ω per wire

Sensing current; ≤ 1.5 mA

• Output accuracy: ±0.04 % of max. output range

Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. span

Response time: ≤ 1 sec. (0 – 90 %)

(≤ 0.15 mA for input code 7: Pt 1000 or code 0

Specified maximum resistance in the table > 500 Ω)

Resistance range:

Burnout response: ≤ 10 sec.

0 - 500 Ω (Input code: 1, 3, 4, 5, 9)

0 - 5 kΩ (Input code: 7)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

If not specified, the input range is 0 – 100°C.

OUTPUT SPECIFICATIONS

■ DC Current

CALCULATION EXAMPLES OF OVERALL ACCURACY

[Example] Pt 100, 0 – 100°C, Output Type -5 – +5V, Output

Range 1 – 5V

Output range: 0 – 20 mA DC

Conformance range: 0 – 20.4 mA DC

Minimum span: 1 mA

Input Accuracy** (0.15°C***) ÷ Span (100°C) × 100 %

+ Max. Output Range (10V) ÷ Span (4V) × 0.04 %

= ±0.25 %

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

**Calculate the accuracy in °C.

Load resistance: Output drive 11 V max.

(e.g. 4 – 20 mA: 550 Ω [11 V ÷ 20 mA])

If not specified, the output range is 4 – 20 mA DC.

■ DC Voltage

***100°C × 0.1 % = 0.1°C ≤ 0.15°C. 0.15°C is used as input

accuracy value.

M6DXR SPECIFICATIONS

ES-7833 Rev.14 Page 2/4

http://www.m-system.co.jp/

MODEL: M6DXR

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

Approval:

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)

EXTERNAL VIEW

FRONT VIEW (with the cover open)

SIDE VIEW

Power LED

Status Indicator LED

Configurator Jack

Output Range Selectors

The DIP switch setting is required to select output types

before setting a precise output range using PC Configurator

Software (model: M6CFG).

Refer to the instruction manual for detailed procedures.

M6DXR SPECIFICATIONS

ES-7833 Rev.14 Page 3/4

http://www.m-system.co.jp/

MODEL: M6DXR

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

WIRE INSERTION ANGLE: approx. 7°

8–M3

EURO TERMINAL

DIN RAIL HOOK

DIN RAIL

35mm wide

SCREWDRIVER

INSERTION ANGLE

: approx. 40°

[0.5 (.02)]

5.9 (.23)

102 (4.02)

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

STATUS LED

2-wire

RTD

3-wire

RTD

4-wire

RTD

DIP SW

Isolation

Digital

Computation

Output

Driver

–

OUTPUT

POWER

Low Drift

Amplifier

POWER LED

–

JACK

CONFIGURATOR

POWER

Specifications are subject to change without notice.

M6DXR SPECIFICATIONS

ES-7833 Rev.14 Page 4/4

http://www.m-system.co.jp/

M6DXR-5Z1-R/Q [MSYSTEM]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB