M6DYV-AA-R/K [MSYSTEM]
Euro Terminal Ultra-Slim Signal Conditioners M6D Series;
| 型号： | M6DYV-AA-R/K |
| 厂家： | 
M-SYSTEM |
| 描述： | Euro Terminal Ultra-Slim Signal Conditioners M6D Series |
| 文件： | 总3页 (文件大小：119K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: M6DYV
DC Power
Euro Terminal Ultra-Slim Signal Conditioners M6D Series
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
ISOLATOR
Functions & Features
[4] OPTIONS (multiple selections)
Response Time (0 – 90 %)
• 5.9-mm wide ultra-slim design
• Low profile allows the M6D module mounted in a 120-mm
deep panel
blank: Standard (≤ 0.5 sec.)
/K: Fast Response (Approx. 3.5 msec. voltage output;
Approx. 25 msec. current output)
Standards & Approvals
• Galvanically isolates process instrumentation signals
• High-density mounting
• Power indicator LED
blank: CE marking
/UL: UL approval, CE marking
Other Options
5.9 (.23)
blank: none
/Q: Option other than the above (specify the specification)
94
(3.70)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
102
(4.02)
/C02: Polyurethane coating
mm (inch)
GENERAL SPECIFICATIONS
Connection
Input and output: Euro terminal (torque 0.3 N·m)
Power input: Via the Installation Base (model: M6DBS)
(not available for AC power input)
or Euro terminal (torque 0.3 N·m)
MODEL: M6DYV-[1][2]-[3][4]
ORDERING INFORMATION
• Code number: M6DYV-[1][2]-[3][4]
Specify a code from below for each [1] through [4].
(e.g. M6DYV-4W4W-R/K/UL/Q)
Applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm
2
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
Zero adjustment: -2 to +2 % (front)
• Specify the specification for option code /Q
(e.g. /C01)
(Output code 4W: Adjustable at 0 V.)
Span adjustment: 98 to 102 % (front)
Power LED: Green light turns on when the power is supplied.
[1] INPUT / [2] OUTPUT
AA: 4 - 20 mA DC (Input resistance 50 Ω)
/ 4 - 20 mA DC (Load resistance 550 Ω max.)
A6: 4 - 20 mA DC (Input resistance 50 Ω)
/ 1 - 5 V DC (Load resistance 5000 Ω min.)
6A: 1 – 5 V DC (Input resistance 1 MΩ min.)
/ 4 - 20 mA DC (Load resistance 550 Ω max.)
66: 1 - 5 V DC (Input resistance 1 MΩ min.)
/ 1 - 5 V DC (Load resistance 5000 Ω min.)
4W4W: -10 - +10 V DC (Input resistance 1 MΩ min.)
/ -10 - +10 V DC (Load resistance 20 kΩ min.)
INPUT SPECIFICATIONS
■ DC Current: Input resistor incorporated
INSTALLATION
Power Consumption
•AC: Max. 2 VA
•DC: Approx. 0.45 W
Operating temperature: -20 to +55°C (-4 to +131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Installation Base (model: M6DBS) or DIN rail
Weight: 60 g (2.1 oz)
[3] POWER INPUT
AC Power
M2: 100 – 240 V AC (Operational voltage range 90 – 264 V,
PERFORMANCE in percentage of span
Accuracy: ±0.1 %
47 – 66 Hz)
(UL not available)
Temp. coefficient: ±0.01 %/°C (±0.006 %/°F)
M6DYV SPECIFICATIONS
ES-7821 Rev.11 Page 1/3
http://www.m-system.co.jp/
MODEL: M6DYV
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input to output
to power to ground)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
Low Voltage Directive
EN 61010-1
Installation Category II
Pollution Degree 2
Input or output to power: Reinforced insulation (300 V)
Input to output: Basic insulation (300 V)
RoHS Directive
EN 50581
Approval:
UL/C-UL nonincendive Class I, Division 2,
Groups A, B, C, and D
(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)
UL/C-UL general safety requirements
(UL 61010-1, CAN/CSA-C22.2 No.61010-1)
EXTERNAL VIEW
(With the cover open)
Power LED
Zero Adj.
Span Adj.
M6DYV SPECIFICATIONS
ES-7821 Rev.11 Page 2/3
http://www.m-system.co.jp/
MODEL: M6DYV
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
WIRE INSERTION ANGLE: approx. 7°
8–M3
EURO TERMINAL
DIN RAIL HOOK
5
6
7
8
DIN RAIL
35mm wide
1
2
3
4
SCREWDRIVER
INSERTION ANGLE
: approx. 40°
[0.5 (.02)]
5.9 (.23)
102 (4.02)
• When mounting, no extra space is needed between units.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Z
S
Isolation
Low Drift
Amplifier
Output
Driver
+
–
1
2
3
4
5
6
+
–
*
INPUT
OUTPUT
POWER
POWER LED
7
8
U(+)
V(–)
**
POWER
* Input shunt resistor incorporated for current input.
** Available only for DC power input type
Specifications are subject to change without notice.
M6DYV SPECIFICATIONS
ES-7821 Rev.11 Page 3/3
http://www.m-system.co.jp/
相关型号：
M6M80011AFP
EEPROM, 64X16, Serial, CMOS, PDSO10, 0.300 INCH, 1.27 MM PITCH, PLASTIC, SOP-10
MITSUBISHI
©2020 ICPDF网 联系我们和版权申明