M6NPS2-R/UL [MSYSTEM]
Screw Terminal Ultra-Slim Signal Conditioners M6N Series;
| 型号： | M6NPS2-R/UL |
| 厂家： | 
M-SYSTEM |
| 描述： | Screw Terminal Ultra-Slim Signal Conditioners M6N Series |
| 文件： | 总3页 (文件大小：124K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: M6NPS2
Screw Terminal Ultra-Slim Signal Conditioners M6N Series
GENERAL SPECIFICATIONS
Connection: M3 screw terminal (torque 0.5 N·m)
Recommended solderless terminal: Max. 5.8 mm (0.23”)
wide; Ones with insulation sleeve do not fit.
POWER SUPPLY MODULE
(dual redundant)
Applicable wire size: 0.2 – 2.5 mm
2
Functions & Features
Housing material: Flame-resistant resin (black)
• Supplies power to the M6N modules mounted on the
Installation Base
Power LED: Green light turns on when the power is supplied.
■Recommended solderless terminal (unit: mm (inch))
• High-density mounting
5.5 max.
(.22)
4 min.
(.16)
• Power indicator LED
3.2 (.13) dia.
7.5 (.30)
102
(4.02)
INSTALLATION
Power input: 2 A (Total current consumed by signal
conditioners on the base must be 2 A or less.)
Operating temperature: -20 to +55°C (-4 to +131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Installation Base (model: M6NBS)
Weight: 60 g (2.1 oz)
102
(4.02)
mm (inch)
PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
MODEL: M6NPS2–R[1]
Dielectric strength: 2000 V AC @1 minute (power to ground)
ORDERING INFORMATION
• Code number: M6NPS2-R[1]
Specify a code from below for [1].
(e.g. M6NPS2-R/UL/Q)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
• Specify the specification for option code /Q
(e.g. /C01)
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
POWER INPUT
EN 50581
DC Power
Approval:
R: 24 V DC
UL/C-UL nonincendive Class I, Division 2,
Groups A, B, C, and D hazardous locations
(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)
UL/C-UL general safety requirements
(UL 61010-1, CAN/CSA-C22.2 No.61010-1)
(Operational voltage range 22 – 27 V, ripple 10 %p-p max.)
[1] OPTIONS (multiple selections)
Standards & Approvals
blank: CE marking
/UL: UL approval, CE marking
Other Options
blank: none
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
M6NPS2 SPECIFICATIONS
ES-7914 Rev.8 Page 1/3
http://www.m-system.co.jp/
MODEL: M6NPS2
EXTERNAL VIEW
(With the cover open)
Power 2 LED
Power 1 LED
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
SCREWDRIVER
INSERTION ANGLE
: approx. 55°
*
WIRE INSERTION ANGLE
: approx. 35°
8–M3
SCREW TERMINAL
5
6
7
8
1
2
3
4
102 (4.02)
7.5 (.30)
*Screwdriver stem diameter: 6 mm (.24”) or less
M6NPS2 SPECIFICATIONS
ES-7914 Rev.8 Page 2/3
http://www.m-system.co.jp/
MODEL: M6NPS2
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
POWER 1
LED
POWER 2
LED
+
+
–
–
+
+
–
–
1
3
2
4
5
7
6
8
POWER SOURCE 1
POWER SOURCE 2
24V DC POWER
Specifications are subject to change without notice.
M6NPS2 SPECIFICATIONS
ES-7914 Rev.8 Page 3/3
http://www.m-system.co.jp/
相关型号：
©2020 ICPDF网 联系我们和版权申明