M6SXT-0V3-R/Q [MSYSTEM]

Tension-Clamp Ultra-Slim Signal Conditioners M6S Series;


型号：	M6SXT-0V3-R/Q
厂家：	M-SYSTEM
描述：	Tension-Clamp Ultra-Slim Signal Conditioners M6S Series
文件：	总5页 (文件大小：177K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M6SXT

0: Specify (Please provide a emf table.)

Tension-Clamp Ultra-Slim Signal Conditioners M6S Series

(Configurator software is used to change the input type and

precise range.)

THERMOCOUPLE TRANSMITTER

(PC programmable)

[2] OUTPUT

Functions & Features

Current

• Maintenance-free tension clamp connection

• 5.9-mm wide ultra-slim design

• Low profile allows the M6S module mounted in a 120-mm

deep panel

Z1: Range 0 – 20 mA DC

Voltage

V2: Range -10 – +10 V DC

V3: Range -5 – +5 V DC

• Accepts a thermocouple input and provides an isolated,

linearized DC signal

(Configurator software is used to change output over the

described range of the selected suffix code.

For changing between suffix codes, set the Output Range

Selector on the side of unit before software adjustment.)

• Cold junction compensation, linearization and burnout

protection

• PC programmable

• High-density mounting

• Power indicator LED

POWER INPUT

DC Power

5.9 (.23)

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS (multiple selections)

Standards & Approvals

(3.70)

blank: CE marking

/UL: UL approval, CE marking

Other Options

102

(4.02)

blank: none

mm (inch)

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

MODEL: M6SXT–[1][2]–R[3]

/C02: Polyurethane coating

ORDERING INFORMATION

• Code number: M6SXT-[1][2]-R[3]

Specify a code from below for each [1] through [3].

(e.g. M6SXT-2Z1-R/UL/Q)

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-7831)

• Temperature range (e.g. 0 – 1000°C)

• Output range (e.g. 4 – 20 mA DC)

• Specify the specification for option code /Q

(e.g. /C01/SET)

RELATED PRODUCTS

• PC configurator software (model: M6CFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

[1] INPUT THERMOCOUPLE

1: (PR)

2: K (CA)

3: E (CRC)

4: J (IC)

5: T (CC)

6: B (RH)

7: R

8: S

N: N

M6SXT SPECIFICATIONS

ES-7981 Rev.9 Page 1/5

http://www.m-system.co.jp/

MODEL: M6SXT

maintained.

GENERAL SPECIFICATIONS

Connection

Load resistance: Output drive 11 V max.

(e.g. 4 – 20 mA: 550 Ω [11 V ÷ 20 mA])

If not specified, the output range is 4 – 20 mA DC.

■ DC Voltage

Input and output: Tension clamp

Power input: Via the Installation Base (model: M6SBS)

or Tension clamp

Code V2 (wide spans)

Applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm

Output range: -10 – +10 V DC

Conformance range: -10.4 – +10.4 V DC

Minimum span: 1 V

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: -2 – +102 %

Code V3 (narrow spans)

(Negative current output is not available.)

Zero adjustment: -2 to +2 % (PC programming)

Span adjustment: 98 to 102 % (PC programming)

Burnout: Upscale standard; downscale or no burnout

optional by programming

Output range: -5 – +5 V DC

Conformance range: -5.2 – +5.2 V DC

Minimum span: 0.5 V

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

Linearization: Standard

Cold Junction Compensation: CJC sensor incorporated

Power LED: Green light turns on when the power is supplied.

Status indicator LED: Orange LED; Blinking patterns indicate

different operating status of the transmitter.

Programming: Downloaded from PC; input type and range,

output type and range, zero and span, burnout type, user’s

linearization table, temperature unit, cold junction

compensation, response characteristics (version 1.30 or

later), cold junction compensation, filter time constant, etc.

For detailed information, refer to the users manual for the

PC configurator.

Load resistance: Output drive 1 mA max.

(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])

If not specified, the output range is shown below.

V2: 0 – 10 V DC

V3: 1 – 5 V DC

INSTALLATION

Power consumption: Approx. 0.5 W

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6SBS) or DIN rail

Weight: 65 g (2.3 oz)

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

INPUT SPECIFICATIONS

Input resistance: 1 MΩ min.

Burnout sensing: ≤ 0.2 μA

Temperature range: See Table 1.

If not specified, the input range is shown below.

1 PR: 0 – 1600°C

PERFORMANCE

Overall accuracy: Input accuracy + output accuracy

• Input accuracy: Accuracy (Table 1) + Cold Junction

Compensation Error 3°C (5.4°F)

• Output accuracy: Max. Output Range ÷ Span × ±0.04%

Cold junction compensation error:

2 K: 0 – 1000°C

±3°C at 25 ±10°C

3 E: 0 – 500°C

±5.4°F at 77 ±18°F

4 J: 0 – 500°C

Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. span

Response time: ≤ 0.5 sec. (0 – 90 %)

Burnout response: ≤ 10 sec.

5 T: 0 – 300°C

6 B: 500 – 1600°C

7 R: 500 – 1600°C

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

8 S: 0 – 1600°C

N N: 0 – 1000°C

OUTPUT SPECIFICATIONS

■ DC Current

Output range: 0 – 20 mA DC

Conformance range: 0 – 20.4 mA DC

Minimum span: 1 mA

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

M6SXT SPECIFICATIONS

ES-7981 Rev.9 Page 2/5

http://www.m-system.co.jp/

MODEL: M6SXT

CALCULATION EXAMPLES OF OVERALL ACCURACY

[Example] K thermocouple, 0 – 1000°C, 4 – 20 mA DC

output

Absolute value accuracy (Table 1): 0.25°C

CJC error (3°C) added: 3.25°C

• Input accuracy = 3.25°C ÷ 1000°C × 100 = 0.325 %

Output span: 16 mA (20 – 4)

• Output accuracy = 20 mA ÷ 16 mA × 0.04 = 0.05 %

Overall accucracy including CJC error = 0.325 + 0.05 =

±0.38 % of span

Table 1.

THERMOCOUPLE

MIN.

MAXIMUM

RANGE

CONFORMANCE

RANGE

ACCURACY

SPAN

(PR)

K (CA)

E (CRC)

J (IC)

T (CC)

B (RH)

0 to 1760

1.00

0.25

0.20

0.25

0.75

0.50

0.30

-270 to +1370 -150 to +1370

-270 to +1000 -170 to +1000

-210 to +1200 -180 to +1200

-270 to +400 -170 to +400

100 to 1820 400 to 1760

-50 to +1760 200 to 1760

-50 to +1760

0 to 1760

-270 to +1300 -130 to +1300

THERMOCOUPLE

MIN.

MAXIMUM

RANGE

CONFORMANCE

RANGE

ACCURACY

SPAN

(PR)

K (CA)

E (CRC)

J (IC)

T (CC)

B (RH)

32 to 3200

1.80

0.45

0.36

0.45

1.35

0.90

0.54

-454 to +2498 -238 to +2498

-454 to +1832 -274 to +1832

-346 to +2192 -292 to +2192

-454 to +752 -274 to +752

212 to 3308 752 to 3200

-58 to +3200 392 to 3200

-58 to +3200

32 to 3200

-454 to +2372 -202 to +2372

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

Approval:

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)

M6SXT SPECIFICATIONS

ES-7981 Rev.9 Page 3/5

http://www.m-system.co.jp/

MODEL: M6SXT

EXTERNAL VIEW

FRONT VIEW (with the cover open)

SIDE VIEW

Power LED

Output Range Selectors

Status Indicator LED

Configurator Jack

The DIP switch setting is required to select output types

before setting a precise output range using PC Configurator

Software (model: M6CFG).

Refer to the instruction manual for detailed procedures.

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

SCREWDRIVER

INSERTION ANGLE

: approx. 35°

WIRE INSERTION ANGLE

: approx.35°

TEST PROBE

max. 2 (.08) dia.

DIN RAIL HOOK

DIN RAIL

35mm wide

SCREWDRIVER

INSERTION ANGLE

: approx. 40°

[0.5 (.02)]

5.9 (.23)

102 (4.02)

• When mounting, no extra space is needed between units.

*Use a minus screwdriver: tip width 3.8 mm max., tip thickness 0.5 to 0.6 mm

M6SXT SPECIFICATIONS

ES-7981 Rev.9 Page 4/5

http://www.m-system.co.jp/

MODEL: M6SXT

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

CJC

SENSOR

STATUS IND. LED

comp. leadwire

DIP SW

Isolation

T/C

–

Digital

Computation

Output

Driver

–

Low Drift

Amplifier

OUTPUT

POWER

POWER LED

–

CONFIGURATOR

JACK

POWER

Specifications are subject to change without notice.

M6SXT SPECIFICATIONS

ES-7981 Rev.9 Page 5/5

http://www.m-system.co.jp/

M6SXT-0V3-R/Q [MSYSTEM]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB