MDP-4R/Q [MSYSTEM]
Lightning Surge Protectors for Electronics Equipment M-RESTER;型号: | MDP-4R/Q |
厂家: | M-SYSTEM |
描述: | Lightning Surge Protectors for Electronics Equipment M-RESTER |
文件: | 总4页 (文件大小:128K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: MDP-4R
Lightning Surge Protectors for
Electronics Equipment M-RESTER
INSTALLATION
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
LIGHTNING SURGE PROTECTOR FOR
Weight: 100 g (0.22 lb), standard; 125 g (0.28 lb), with DIN
rail mounting adapter
RS-485 / RS-422
Functions & Features
• Designed specifically for the network
• No interruption of transmission signal by unplugging the
head element module
PERFORMANCE
Max. continuous operating voltage (Uc):
B to C: ±5 V
B or C to A: 5 V
Line to earth: ±140 V
Voltage protection level (Up):
• @ 2 kV (1 kA)
Lot.NO
MDEIJPAN1430B
2 to 3: ±20 V
M•STER
MODEL
2 or 3 to 1: 20 V
Line to earth: ±500 V
Response time:
Line to line: ≤ 4 nsec.
MODEL: MDP–4R[1]
Line to earth: ≤ 20 nsec.
Leakage current:
B to C: ≤ 0.2 mA @ ±5 V DC
B or C to A: ≤ 0.2 mA @ 5 V DC
Line to earth: ≤ 10 μA @ ±140 V DC
Max. discharge current (Imax): 5000 A (8 / 20 μs)
ORDERING INFORMATION
• Code number: MDP-4R[1]
Specify a code from below for [1].
(e.g. MDP-4R/A33/Q)
Nominal current (I ): 100 mA
N
• Specify the specification for option code /Q
(e.g. /C01)
Internal series resistance: Approx. 4.5 Ω including return
Capacitance @ 1 MHz:
Line to line: ≤ 1000 pF
[1] OPTIONS (multiple selections)
DIN Rail Mounting Adapter
blank: Without
Line to earth: ≤ 100 pF
Input attenuation: -0.5 dB or less @ DC to 2.0 MHz, Zo =
110 Ω
/A33: With adapter (model A-33)
Other Options
Surge protection: IEC 61643-21 Categories C1, C2
blank: none
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
GENERAL SPECIFICATIONS
Construction: Plug-in
Connection: M4 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (black)
MDP-4R SPECIFICATIONS
ES-8232 Rev.8 Page 1/4
http://www.m-system.co.jp/
MODEL: MDP-4R
CONNECTION EXAMPLES
Example: Protected devices have no SG terminals
Protected Device
MDP-4R
MDP-4R
Protected Device
+
–
3
C
B
A
C
3
2
1
+
–
LINE
LINE
LINE
LINE
2
1
B
A
SG
2
1
*
*
G
G
G
G
4
4
*
*
3
*
Grounding
≤100
Grounding
≤100
*1. Leave Terminal A when the shielded twisted-pair cable is not provided.
*2. Leave Terminal 1 when the protected device has no SG (Signal Ground) terminal.
*3. Cross wire to the surge protector’s G terminal when grounding the shield wire.
*4. Cross-over wire between G terminals of the surge protector and the protected device is required.
Ground only the surge protector if the protected device has no G terminal.
Example: Each SG terminal is connected with triplex cable
Protected Device MDP-4R
MDP-4R
Protected Device
+
−
+
LINE
LINE
3
C
B
A
C
3
2
1
LINE
−
2
1
B
A
LINE
SG
SG
G
1
G
G
G
*
3
3
*
*
2
*
Grounding
≤100
Grounding
≤100
*1. Provide electrical insulation with insulating tape and the like so that the live part is not exposed,
as over voltage may generate on the shield wire.
*2. Cross wire to the surge protector’s G terminal when grounding the shield wire.
*3. Cross-over wire between G terminals of the surge protector and the protected device is required.
Ground only the surge protector if the protected device has no G terminal.
GROUNDING
PROTECTED
EQUIPMENT
M-RESTER
G
G
GROUNDING
(100 ohms or less)
CROSSOVER WIRE
A crossover wire between M-RESTER ground and the ground or
metallic housing of the equipment is required for protection.
If the protected equipment has no ground terminal, ground the
M-RESTER only.
When the M-RESTER is mounted with DIN Rail Mounting Adapter,
connect the grounding wire to the mounting screw of the M-RESTER.
MDP-4R SPECIFICATIONS
ES-8232 Rev.8 Page 2/4
http://www.m-system.co.jp/
MODEL: MDP-4R
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
■ STANDARD
80 (3.15)
53 (2.09)
2–5 (.20) dia.
MTG HOLE
31.5 (1.24)
27 (1.06)
HEAD ELEMENT
3
2
1
BASE
6–M4 TERMINAL SCREW
C
B
A
GROUND TERMINAL (G)
(used as mounting bracket)
■ WITH DIN RAIL MOUNTING ADAPTER
8.5
(.33)
[3.3 (.13)]
80 (3.15)
53 (2.09)
27 (1.06)
31.5 (1.24)
DIN RAIL
35mm wide
3
2
1
6–M4 TERMINAL SCREW
C
B
A
2–M4 MOUNTING SCREW
(used as ground terminal (G))
MOUNTING REQUIREMENTS unit: mm (inch)
2–M4 SCREW
33 (1.30) min.
MDP-4R SPECIFICATIONS
ES-8232 Rev.8 Page 3/4
http://www.m-system.co.jp/
MODEL: MDP-4R
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
1.5W
1.5W
1.0 W
1.0 W
C
B
3
2
LINE
LINE
HEAD
ELEMENT
2.0 W
2.0 W
Discharge
Element
Surge
Side
Protected
Device Side
ZD
ZD ZD
ZD
SG A
1
SG
BASE
G
GROUND TERMINAL
(used as mounting attachment)
Specifications are subject to change without notice.
MDP-4R SPECIFICATIONS
ES-8232 Rev.8 Page 4/4
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明