MERP-13PD-C/Q [MSYSTEM]
Plug-in Signal Conditioners M-UNIT;![MERP-13PD-C/Q](http://pdffile.icpdf.com/pdf2/p00353/img/icpdf/MERP-12PB-B_2172582_icpdf.jpg)
型号: | MERP-13PD-C/Q |
厂家: | ![]() |
描述: | Plug-in Signal Conditioners M-UNIT |
文件: | 总4页 (文件大小:129K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: MERP
Plug-in Signal Conditioners M-UNIT
[2] OUTPUT SIGNAL POLARITY
P: Negative in lag, positive in lead
M: Negative in lead, positive in lag
VAR TRANSDUCER
Functions & Features
• Providing a DC output signal in proportion to AC reactive
[3] OUTPUT
power
Current
• DC output containing little ripple is ideal for computer
A: 4 – 20 mA DC (Load resistance 600 Ω max.)
B: 2 – 10 mA DC (Load resistance 1200 Ω max.)
C: 1 – 5 mA DC (Load resistance 2400 Ω max.)
D: 0 – 20 mA DC (Load resistance 600 Ω max.)
E: 0 – 16 mA DC (Load resistance 750 Ω max.)
F: 0 – 10 mA DC (Load resistance 1200 Ω max.)
G: 0 – 1 mA DC (Load resistance 12 kΩ max.)
GW: -1 – +1 mA DC (Load resistance 10 kΩ max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
input
• "Time division multiplication" method accepts distorted
waveforms
• Isolation up to 2000 V AC
• High-density mounting
Typical Applications
• Centralized monitoring and control of power management
system in a manufacturing facility or building
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)
3: 0 – 1 V DC (Load resistance 1000 Ω min.)
4: 0 – 10 V DC (Load resistance 10 kΩ min.)
5: 0 – 5 V DC (Load resistance 5000 Ω min.)
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
1W: -10 – +10 mV DC (Load resistance 10 kΩ min.)
2W: -100 – +100 mV DC (Load resistance 100 kΩ min.)
3W: -1 – +1 V DC (Load resistance 1000 Ω min.)
4W: -10 – +10 V DC (Load resistance 10 kΩ min.)
5W: -5 – +5 V DC (Load resistance 5000 Ω min.)
0: Specify voltage (See OUTPUT SPECIFICATIONS)
50
(1.97)
80
(3.15)
136
(5.35)
mm (inch)
MODEL: MERP-1[1][2][3]-[4][5]
[4] POWER INPUT
AC Power
ORDERING INFORMATION
• Code number: MERP-1[1][2][3]-[4][5]
Specify a code from below for each of [1] through [5].
(e.g. MERP-11PA-C/Q)
B: 100 V AC
C: 110 V AC
D: 115 V AC
F: 120 V AC
G: 200 V AC
H: 220 V AC
J: 240 V AC
• Calibration range (e.g. lag 1000 – lead 1000 var)
• VT ratio, CT ratio (e.g. VT 3300/110 V, CT 250/5 A)
• Special output range (For codes Z & 0)
• Specify the specification for option code /Q
(e.g. /C01/S01)
DC Power
S: 12 V DC
R: 24 V DC
CONFIGURATION
1: 3-phase / 3-wire
V: 48 V DC
P: 110 V DC
[1] INPUT (unbalanced load)
(Voltage must be balanced.)
1: 110 V / 5 A AC
[5] OPTIONS
blank: none
/Q: With options (specify the specification)
2: 110 V / 1 A AC
3: 220 V / 1 A AC
4: 220 V / 5 A AC
MERP SPECIFICATIONS
ES-1922 Rev.1 Page 1/4
http://www.m-system.co.jp/
MODEL: MERP
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
OUTPUT SPECIFICATIONS
■ DC Current: 0 – 20 mA DC and ± 1 mA
Minimum span: 1 mA
/C02: Polyurethane coating
Offset: Max. 1.5 times span
Load resistance: Output drive 12 V maximum; 10 V for [±]
output
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
■ DC Voltage: -10 – +12 V DC
Minimum span: 5 mV
Offset: Max. 1.5 times span
GENERAL SPECIFICATIONS
Construction: Plug-in
Load resistance: Output drive 1 mA max. at ≥ 0.5 V
OPERATION DIAGRAM (example)
Connection: M3.5 screw terminals
• Negative in lag, positive in lead
Screw terminal: Chromated steel (standard) or stainless
steel
OUT
20mA
OUT
+10V
Housing material: Flame-resistant resin (black)
Isolation: Voltage input to current input to output to power
Overrange output: Approx. -10 to +120 % at 1 – 5 V
Zero adjustment: -5 to +5 % (front)
Span adjustment: 95 to 105 % (front)
12
4
0
-10V
1000
(Lag)
1000
(Lag)
0
1000var
(Lead)
0
1000var
(Lead)
• Negative in lead, positive in lag
INPUT SPECIFICATIONS
Frequency: 50 or 60 Hz
OUT
20mA
OUT
+10V
• Current Input
12
4
0
Operational range: 0 – 120 % of rating
Overload capacity: 1000 % of rating for 3 sec., 200 % for 10
sec., 120% continuous
-10V
1000
(Lag)
0
1000var
(Lead)
1000
(Lag)
0
1000var
(Lead)
• Voltage Input
Operational range: 0 – 120 % of rating
Overload capacity: 150 % of rating for 10 sec., 120 %
continuous
INSTALLATION
Power input
■ Input Range
• AC: Operational voltage range: rating ±10 %,
50/60 ±2 Hz, approx. 2 VA
How To Determine Var Range:
Calibration Range [var] = Measuring Range ÷ ((VT Ratio) ×
(CT Ratio))
• DC: Operational voltage range: rating ±10 %,
or 85 – 150 V for 110 V rating, ripple 10 %p-p max.,
approx. 2 W (18 mA at 110 V)
Check that the required calibration range is within the
available range in the table. Specify this range when
ordering.
Operating temperature: -5 to +60°C (23 to 140°F)
Operating humidity: 30 to 85 %RH (non-condensing)
Mounting: Surface or DIN rail
[example]
3-phase / 3-wire, measuring range 75 kvar, VT 220 / 110 V,
CT 250 / 5 A
Weight: 400 g (0.88 lb)
75 × 10 [var] ÷ ((220 ÷ 110) × (250 ÷ 5)) = 750 [var]
3
• 3-phase / 3-wire
INPUT
BURDEN (VA)
AVAILABLE
RANGE
STD.RANGE
VOLT.
CURR.
0.1/phase
0.5/phase
0.1/phase
0.5/phase
110V/1A 200 var
110V/5A 1000 var
220V/1A 400 var
100 – 240 var
500 – 1200 var
200 – 480 var
0.2
/phase
0.4
/phase
220V/5A 2000 var 1000 – 2400 var
MERP SPECIFICATIONS
ES-1922 Rev.1 Page 2/4
http://www.m-system.co.jp/
MODEL: MERP
PERFORMANCE in percentage of span
Accuracy: ±0.5 %
Temp. coefficient: ±0.05 %/°C (±0.03 %/°F)
Response time: ≤ 1 sec. (0 – 90 %)
Ripple: 0.5 %p-p max. (50/60 Hz)
The output ripple may increase when there is great
difference between the frequencies of input signal and
power supply.
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @ 1 minute
(voltage input to current input to output to power to ground)
CONNECTION DIAGRAM
■
3-PHASE/3-WIRE
SOURCE
3
1
2
VT
FUSE
U
u
P1
P2
P3
3
9
4
1
2
+
–
OUTPUT
V
V
v
v
U
u
K
K
k
1S
1L
3S
3L
5
6
7
8
k
*
*
CT
10
11
U(+)
V(–)
l
l
L
L
POWER**
LOAD
*CT Protector (model: CTM) attached to these terminals.
**The transducer can be powered from the input voltage
when the voltage is sufficiently stable and meets
other supply voltage requirements.
EXTERNAL DIMENSIONS unit: mm (inch)
CLAMP
(top & bottom)
7.8 (.31)
DIN RAIL
35mm wide
8
9
7
6
5
4
2–
4.5 (.18) dia.
MTG HOLE
25 (.98) deep
3
2
10 11
1
11
–M3.5
SCREW
50 (1.97)
107 (4.21)
136 (5.35)
40 (1.57)
50 (1.97)
[3.3 (.13)]
• When mounting, no extra space is needed between units.
MERP SPECIFICATIONS
ES-1922 Rev.1 Page 3/4
http://www.m-system.co.jp/
MODEL: MERP
TERMINAL ASSIGNMENTS unit: mm (inch)
CT PROTECTOR
(model: CTM)
8
7
6
5
4
9
3
2
10 11
1
Specifications are subject to change without notice.
MERP SPECIFICATIONS
ES-1922 Rev.1 Page 4/4
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明