MFS2-A6-P [MSYSTEM]
Plug-in Signal Conditioners M-UNIT;![MFS2-A6-P](http://pdffile.icpdf.com/pdf2/p00354/img/icpdf/MFS2-6A-R_2176061_icpdf.jpg)
型号: | MFS2-A6-P |
厂家: | ![]() |
描述: | Plug-in Signal Conditioners M-UNIT |
文件: | 总4页 (文件大小:130K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: MFS2
Plug-in Signal Conditioners M-UNIT
[3] POWER INPUT
AC Power
M: 85 – 264 V AC (Operational voltage range 85 – 264 V,
SPLIT-RANGE TRANSMITTER
(isolated four outputs)
47 – 66 Hz)
DC Power
Functions & Features
R: 24 V DC
• Generates four isolated signals which could control
multiple final control elements
• PC programmable
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
P: 110 V DC
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)
• High-density mounting
Typical Applications
[4] OPTIONS
• Manipulating multiple valves for split-range control
blank: none
/Q: With options (specify the specification)
72
(2.83)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
80
(3.15)
/C02: Polyurethane coating
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
139
(5.47)
mm (inch)
RELATED PRODUCTS
MODEL: MFS2–[1][2]–[3][4]
• PC configurator software (model: MFS2CFG)
Software downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
ORDERING INFORMATION
• Code number: MFS2-[1][2]-[3][4]
Specify a code from below for each of [1] through [4].
(e.g. MFS2-A4-M/Q)
• Use Ordering Information Sheet (No. ESU-1383)
• Factory default setting (See “OPERATION DIAGRAM”) will
be used if not otherwise specified.
GENERAL SPECIFICATIONS
Construction: Plug-in
• Specify the specification for option code /Q
(e.g. /C01/S01)
Connection: M3.5 screw terminals
Screw terminal: Chromated steel (standard) or stainless
steel
Housing material: Flame-resistant resin (black)
Isolation: Input to output 1 to output 2 to output 3 to output
4 to power
[1] INPUT
Current
A: 4 – 20 mA DC (Input resistance 250 Ω)
Voltage
Overrange output: 0 to 100 %
Zero adjustment: -5 to +5 % (PC programming)
Span adjustment: 95 to 105 % (PC programming)
Power LED: Green light turns on in normal operating
conditions.
4: 0 – 10 V DC (Input resistance 1 MΩ min.)
6: 1 – 5 V DC (Input resistance 1 MΩ min.)
[2] OUTPUT 1 through 4
Current
Programming: Downloaded from PC; I/O characteristics,
high/low limits, fixed output, etc.
A: 4 – 20 mA DC (Load resistance 500 Ω max.)
Voltage
Configurator connection: 2.5 dia. miniature jack;
RS-232-C level
4: 0 – 10 V DC (Load resistance 10 kΩ min.)
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
Fixed output: Preset fixed outputs provided by contact
signal control at the terminals 5 – 6 (Open or Close trigger
conditions can be programmed.)
MFS2 SPECIFICATIONS
ES-1383 Rev.6 Page 1/4
http://www.m-system.co.jp/
MODEL: MFS2
INPUT SPECIFICATIONS
■ DC Current:
Shunt resistor attached to the input terminals (0.5 W)
■ Contact Input
Detecting voltage/current: Approx. 2 V DC / 50 μA
Detection levels
ON resistance: ≤ 200 Ω, ≤ 0.5 V
OFF resistance: ≥ 100 kΩ, ≥ 1.7 V
INSTALLATION
Power consumption
•AC:
approx. 4 VA at 100 V
approx. 5.5 VA at 200 V
approx. 6.5 VA at 264 V
•DC: Approx. 2 W
Operating temperature: 0 to 50°C (32 to 122°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Weight: 400 g (0.88 lb)
PERFORMANCE in percentage of span
Accuracy: ±0.5 %
Temp. coefficient: ±0.05 %/°C (±0.03 %/°F)
Response time: ≤ 0.5 sec. (0 – 90 %)
Line voltage effect: ±0.5 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @ 1 minute
(input to output 1 or output 2 or output 3 or output 4 to
power to ground)
500 V AC @ 1 minute (between each output)
EXTERNAL VIEW
Power LED
PC Configurator Jack
MFS2 SPECIFICATIONS
ES-1383 Rev.6 Page 2/4
http://www.m-system.co.jp/
MODEL: MFS2
EXTERNAL DIMENSIONS unit: mm (inch)
CLAMP
(top & bottom)
7.8 (.31)
DIN RAIL
35mm wide
7
14
6
5
12
4
3
2–4.5 (.18) dia.
MTG HOLE
25 (.98) deep
8
9
15 10
1
11
2
14–M3.5
SCREW
72 (2.83)
109 (4.29)
139 (5.47)
60 (2.36)
72 (2.83)
[3.3 (.13)]
• When mounting, no extra space is needed between units.
TERMINAL ASSIGNMENTS unit: mm (inch)
INPUT RESISTOR
(model: REM)
7
14
6
5
12
4
3
8
9
15 10
1
11
2
Input shunt resistor attached
for current input.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Isolation
Output 1
11
+
–
Driver
OUTPUT 1
OUTPUT 2
OUTPUT 3
OUTPUT 4
2
Isolation
Output 2
10
+
–
Driver
Digital
Computation
1
Isolation
Isolation
Output 3
Driver
Low Drift
Amplifier
+
–
9
+
–
4
12
5
*
ANALOG INPUT
CONTACT INPUT
R
15
Contact
Input
Output 4
Driver
+
–
8
3
6
POWER LED
CONFIGURATOR
JACK
U(+)
V(–)
7
POWER
14
Base Socket
*Input shunt resistor attached for current input.
MFS2 SPECIFICATIONS
ES-1383 Rev.6 Page 3/4
http://www.m-system.co.jp/
MODEL: MFS2
OPERATION DIAGRAM
The diagram below shows an example of I/O characteristics as specified in Table 1.
The split-range operations can be specified when ordering, by using Ordering Information Sheet, or programmed by the user
using PC Configurator Software. Please refer to Users Manual for the PC Configurator for more information.
1) Two pairs of input and output in % define each split I/O range.
Proportional (positive) or inverted (negative) characteristics can be specified.
2) High and low limits for each output can be specified independently within the full-scale range.
3) Fixed output value for each output can be specified independently in advance.
These outputs are provided when the contact input is closed or opened (predefined).
H limit ≥ Fixed output ≥ Low limit
4) Applying the fixed output or not can be specified independently for each output.
In the figure, fixed output is applied to the output 2 with contact input. The solid line shows the function when contact input is
shorted. The chain double-dashed line shows the function when contact input is opened.
Output 2
Fixed output (contact input shorted)
Output 1
100
Y11
Y31
Y22
Y42
Output 3
Output 4
Output 4
H Limit
Output 2
Fixed output
(contact input opened)
Y32
Y2S
Y41
Y21
Y12
0
X11
X21 X12
X22 X31
X41
X32
X42
100
Input %
Table 1
INPUT %
OUTPUT % LIMIT %
FIXED OUTPUT %
CONTACT INPUT TRIGGER CONDITION
Output 1
Output 2
Output 3
Output 4
X
11 = 0.00
Y
Y
11 = 100.00
12 = 0.00
H
1
2
3
4
= 100.00
= 0.00
Y
Y
Y
Y
1S = 0.00
2S = 30.00
3S = 0.00
4S = 0.00
Not applied
----
Open
----
X
12 = 30.00
L
1
X
21 = 25.00
22 = 50.00
Y
Y
21 = 0.00
H
= 100.00
= 0.00
Applied
X
22 = 100.00
L
2
X
31 = 55.00
32 = 80.00
Y
Y
31 = 90.00
32 = 10.00
H
= 90.00
= 10.00
Not applied
Not applied
X
L
3
X
41 = 70.00
Y
Y
41 = 10.00
42 = 90.00
H
= 70.00
= 10.00
----
X
42 = 100.00
L
4
Factory default setting used if no Ordering Information is provided:
INPUT % OUTPUT % LIMIT % FIXED OUTPUT %
CONTACT INPUT TRIGGER CONDITION
Output 1
Output 2
Output 3
Output 4
X
11 = 0.00
Y
Y
11 = 0.00
H
1
2
3
4
= 100.00
= 0.00
Y
Y
Y
Y
1S = 0.00
2S = 0.00
3S = 0.00
4S = 0.00
Not applied
Not applied
Not applied
Not applied
Open
Open
Open
Open
X
12 = 100.00
12 = 100.00
L
1
X
21 = 0.00
Y
Y
21 = 0.00
H
= 100.00
= 0.00
X
22 = 100.00
22 = 100.00
L
2
X
31 = 0.00
Y
Y
31 = 0.00
H
= 100.00
= 0.00
X
32 = 100.00
32 = 100.00
L
3
X
41 = 0.00
Y
Y
41 = 0.00
H
= 100.00
= 0.00
X
42 = 100.00
42 = 100.00
L
4
Specifications are subject to change without notice.
MFS2 SPECIFICATIONS
ES-1383 Rev.6 Page 4/4
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明