R1D-GH2T-M2 [MSYSTEM]
Remote I/O R1X Series THERMOCOUPLE & DC INPUT MODULE;
| 型号： | R1D-GH2T-M2 |
| 厂家： | 
M-SYSTEM |
| 描述： | Remote I/O R1X Series THERMOCOUPLE & DC INPUT MODULE 输入元件 |
| 文件： | 总5页 (文件大小：165K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: R1D-GH2
Remote I/O R1X Series
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
THERMOCOUPLE & DC INPUT MODULE
(16 points; DeviceNet)
/C02: Polyurethane coating
/C03: Rubber coating
Functions & Features
• 16-point thermocouple or DC inputs
• DeviceNet interface
RELATED PRODUCTS
• Resistor module (model: REM3-250)
• R1X configurator software (model: R1CON)
• EDS file
175 (6.89)
The EDS file and configurator software are downloadable at
M-System’s web site.
40
(1.57)
115
(4.53)
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
mm (inch)
MODEL: R1D-GH2T-[1][2]
GENERAL SPECIFICATIONS
Connection
ORDERING INFORMATION
• Code number: R1D-GH2T-[1][2]
Specify a code from below for each [1] and [2].
(e.g. R1D-GH2T-M2/Q)
Power input, DeviceNet: Euro type connector terminal
(applicable wire size: 0.2 to 2.5 mm
2
(AWG24 to 12),
stripped length 7 mm)
Input: M3 screw terminals (torque 0.6 N·m)
Configurator: 2.5 dia. miniature jack; RS-232-C level
Screw terminal: Nickel-plated steel
• Specify the specification for option code /Q
(e.g. /C01)
• Use Ordering Information Sheet (No. ESU-5956). Default
setting will be used if not otherwise specified.
Factory default setting
Housing material: Flame-resistant resin (gray)
Isolation: Input to DeviceNet to power
Power indicator: Green LED turns on with power supplied.
Input type: DC Voltage ±5 V
Burnout protection: No burnout
DeviceNet COMMUNICATION
Transmission cable: Approved for DeviceNet
Node address setting: Rotary switch or software; 00 – 63
Baud rate setting: DIP switch or software
MS (Module Status) indicator: Bi-color (green/red)
LED indicates device status.
Cold junction compensation: No
FIELD TERMINAL TYPE
T: M3 screw terminals
NS (Network Status) indicator: Bi-color (green/red)
LED indicates status of the communication link.
Device Profile: Generic Device
[1] POWER INPUT
AC Power
M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,
47 – 66 Hz)
DC Power
INPUT SPECIFICATIONS
■ Thermocouple or DC input, 16 points
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
(Common negative for DC input)
•Measuring range ±20 V, ±5 V, ±1 V: Atten. SW ON (3)
•Measuring range ±0.8 V, ±0.2 V, ±50 mV, ±10m V: Atten.
SW OFF (1)
[2] OPTIONS
blank: none
Input resistance: 300 kΩ
/Q: With options (specify the specification)
Thermocouple types: PR, K, E, J, T, B, R, S, C, N, U, L, P
Sampling rate: 150 millisec./16 points
■ A/D conversion output: 16-bit signed binary (negative
range represented by 2’s complements)
R1D-GH2 SPECIFICATIONS
ES-5958 Rev.8 Page 1/5
http://www.m-system.co.jp/
MODEL: R1D-GH2
Engineering unit value is converted into A/D conversion
data as shown below.
PERFORMANCE (% of measuring range)
Accuracy
Input type & range: A/D data (decimal)
±20 V: ±20000
DC input: ±0.3 %
Thermocouple input: See the table on the end of this
section.
±5 V: ±5000
±1 V: ±10000
Cold junction compensation error: ±3°C or ±5.4°F max.
(at 20°C ±10°C or 68°F ±18°F)
±0.8 V: ±8000
±0.2 V: ±20000
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
±0.05 %/°C (±0.03 %/°F) for 10 mV range and T/C B (RH)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(input to DeviceNet to power to FG)
±50 mV: ±5000
±10 mV: ±10000
Thermocouples: Temperature × 10
In order to change input type and range after shipment, the
R1X configurator software (model: R1CON) is required.
Thermocouple Accuracy
15
14 13 12 11 10
9
8
7
6
5
4
3
2
1
0
USABLE RANGE ACCURACY CONFORMANCE
T/C
SIGN
BIT
Ch. (1st)
INPUT 1 A/D CONVERSION DATA
INPUT 2 A/D CONVERSION DATA
INPUT 3 A/D CONVERSION DATA
INPUT 4 A/D CONVERSION DATA
(°C)
(%)
RANGE (°C)
(PR)
K (CA)
E (CRC)
J (IC)
T (CC)
B (RH)
R
0 to 1770
-270 to +1370
-270 to +1000
-210 to +1200
-270 to +400
100 to 1820
-.0 to +1760
-.0 to +1760
0 to 2320
0ꢀ.
0ꢀ3
0ꢀ7
0ꢀ7
1ꢀ0
400 to 1770
0 to 1370
0 to 1000
0 to 1200
0 to 400
700 to 1820
400 to 1760
400 to 1760
0 to 2320
0 to 1300
0 to 600
0 to 900
0 to 139.
SIGN
BIT
Ch. (1st+1)
Ch. (1st+2)
Ch. (1st+3)
SIGN
BIT
SIGN
BIT
0ꢀ7
0ꢀ7
0ꢀ7
0ꢀ7
0ꢀ.
0ꢀ.
0ꢀ3
0ꢀ.
S
C (WRe .-26
)
SIGN
BIT
Ch. (1st+7)
Ch. (1st+11)
Ch. (1st+15)
INPUT 8 A/D CONVERSION DATA
INPUT 12 A/D CONVERSION DATA
INPUT 16 A/D CONVERSION DATA
N
-270 to +1300
-200 to +600
-200 to +900
0 to 139.
U
L
P
(Platinel II)
SIGN
BIT
USABLE RANGE ACCURACY CONFORMANCE
T/C
(PR)
(°F)
(%)
RANGE (°F)
32 to 3218
-4.4 to +2498
-4.4 to +1832
-346 to +2192
-4.4 to +7.2
212 to 3308
-.8 to +3200
-.8 to +3200
32 to 4208
0ꢀ.
0ꢀ3
0ꢀ7
0ꢀ7
1ꢀ0
7.2 to 3218
32 to 2498
32 to 1832
32 to 2192
32 to 7.2
1292 to 3308
7.2 to 3200
7.2 to 3200
32 to 4208
32 to 2372
32 to 1112
32 to 16.2
32 to 139.
K (CA)
SIGN
BIT
E (CRC)
J (IC)
T (CC)
The R1D reserves 16 words at the Output Data Area (data
sent from the R1D to the master) for the specified node address
and sets the input data at this area. The Input Data
Area (data sent to the R1D from the master) for the same
node address is only reserved but unused.
B (RH)
0ꢀ7
0ꢀ7
0ꢀ7
0ꢀ7
0ꢀ.
0ꢀ.
0ꢀ3
0ꢀ.
R
S
C (WRe .-26
)
N
U
L
-4.4 to +2372
-328 to +1112
-328 to +16.2
32 to 139.
INSTALLATION
Power consumption
P (Platinel II)
Note: CJC error is not includedꢀ
•AC: Approx. 6 VA
•DC: Approx. 2 W
Supply voltage to network: 11 – 25 V DC supplied through
the network terminal block
Supply current to network: 50 mA max.
Operating temperature: -5 to +60°C (23 to 140°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Weight: 380 g (0.84 lb)
R1D-GH2 SPECIFICATIONS
ES-5958 Rev.8 Page 2/5
http://www.m-system.co.jp/
MODEL: R1D-GH2
EXTERNAL VIEW
A
B
C
D
E F G
H
NAME
FUNCTIONS
A
B
C
D
Power terminal block
Network terminal block
Baud rate setting
For power input
For wiring to DeviceNet
125, 250, 500 kbps (factory set to: 125 kpbs)
Selectable within 00 – 63 (factory set to: 00)
Node address setting
COLOR
FUNCTIONS
ON: Critical communication error
blinking: Minor communication error
ON: Communication established
blinking: Communication down
OFF: Power Not supplied
FUNCTIONS
E
NS (Network Status)
indicator LED
Red
Green
----
COLOR
Red
F
MS (Module Status)
indicator LED
ON: Critical failure
blinking: Minor failure
Green
ON: Normal conditions
blinking: Device Not configured
----
OFF:
Power Not supplied
COLOR
Green
----
FUNCTIONS
G
H
Power LED
ON:
Power supplied
Power Not supplied
OFF:
Configurator jack
2.5 dia. miniature jack; RS-232-C level
R1D-GH2 SPECIFICATIONS
ES-5958 Rev.8 Page 3/5
http://www.m-system.co.jp/
MODEL: R1D-GH2
CONNECTION DIAGRAM
DC INPUT T/C INPUT
+
+
Comm.
Circuit
+
1
V+
ext. wire
INPUT 1
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
2
CAN_H
Drain
CAN_L
V–
–
–
To Other
DeviceNet Devices
3
INPUT 2
INPUT 3
INPUT 4
INPUT 5
INPUT 6
INPUT 7
INPUT 8
INPUT 9
INPUT 10
INPUT 11
INPUT 12
INPUT 13
INPUT 14
INPUT 15
INPUT 16
4
5
6
Power
Circuit
7
T6
T7
T8
U (+)
POWER
V (–)
8
9
FG
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
JACK
CONFIGURATOR
Input
Circuit
CJC
Sensor
Unused
Unused
Note 1: This device is not designed to cancel noise included in the input signals.
Be careful to eliminate such noise by using shielded cables.
Note 2: Be sure to maintain the same potential at all the common negative
terminals for DC input.
Caution: FG terminal is NOT a protective conductor terminal.
R1D-GH2 SPECIFICATIONS
ES-5958 Rev.8 Page 4/5
http://www.m-system.co.jp/
MODEL: R1D-GH2
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
175 (6.89)
165 (6.50)
15.5 (.61)
3–5 (.20) dia.
MTG HOLES
CAN_H Drain CAN_L
T6 T7 T8
V+
V–
DIN RAIL
35 mm wide
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18
19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 35
3 (.12)
40 (1.57)
163 (6.42)
[6 (.24)]
FOR WALL MOUNT.
CJC SENSOR (model: CJM)
6.2 (.24)
36–M3 INPUT TERMINALS
Specifications are subject to change without notice.
R1D-GH2 SPECIFICATIONS
ES-5958 Rev.8 Page 5/5
http://www.m-system.co.jp/
相关型号：
©2020 ICPDF网 联系我们和版权申明