R3-BS16/CE [MSYSTEM]
Remote I/O R3 Series INSTALLATION BASE;型号: | R3-BS16/CE |
厂家: | M-SYSTEM |
描述: | Remote I/O R3 Series INSTALLATION BASE |
文件: | 总5页 (文件大小:161K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: R3-BS
Remote I/O R3 Series
INSTALLATION BASE
GENERAL SPECIFICATIONS
Capacity:
R3-BS02: 2 modules
R3-BS02P: 2 modules
R3-BS04: 4 modules
R3-BS06: 6 modules
R3-BS08: 8 modules
R3-BS10: 10 modules
R3-BS12: 12 modules
R3-BS14: 14 modules
R3-BS16: 16 modules
INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Surface or DIN rail
Weight (No remote I/O module mounted)
R3-BS02: 100 g (0.22 lb)
MODEL: R3–BS[1][2]
ORDERING INFORMATION
• Code number: R3-BS[1][2]
Specify a code from below for each of [1] and [2].
(e.g. R3-BS10/CE/Q)
R3-BS02P: 100 g (0.22 lb)
R3-BS04: 150 g (0.33 lb)
• Specify the specification for option code /Q
(e.g. /C01)
R3-BS06: 200 g (0.44 lb)
R3-BS08: 250 g (0.55 lb)
R3-BS10: 350 g (0.77 lb)
[1] NUMBER OF SLOTS
02: 2 slots
R3-BS12: 400 g (0.88 lb)
R3-BS14: 450 g (0.99 lb)
02P: 2 slots (R3-NP1 only)
04: 4 slots
R3-BS16: 500 g (1.10 lb)
06: 6 slots
STANDARDS & APPROVALS
EU conformity:
08: 8 slots
10: 10 slots
EMC Directive
12: 12 slots
EMI EN 61000-6-4
14: 14 slots
EMS EN 61000-6-2
RoHS Directive
16: 16 slots
[2] OPTIONS (multiple selections)
Standards & Approvals
blank: Without CE
/CE: CE marking
Other Options
blank: none
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
Only solder side of the main PWB is coated.
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
R3-BS SPECIFICATIONS
ES-8356 Rev.13 Page 1/5
https://www.m-system.co.jp/
MODEL: R3-BS
EXTERNAL VIEW
Mount the I/O Modules from the left end (I/O 1) to the right in order that the Network Module assigns data areas from I/O 1.
Be sure to install a network module on the right side of the I/O modules. For a power supply module, be sure to install in the
right end slot for heat dissipation. In the case of redundant power supply, consecutively install them in the right end slot.
I/O 1 I/O 2
I/O n
EXTERNAL DIMENSIONS unit: mm [inch]
■R3-BS02, BS02P
56 [2.20]
30 [1.18]
4 [.16]
5 [.20]
26.5
4–4.5 [.28] dia. MTG HOLE
2 [.08] deep
[1.04]
DIN RAIL
(35 mm wide)
16.7
[.66]
120 [4.72]
R3-BS SPECIFICATIONS
ES-8356 Rev.13 Page 2/5
https://www.m-system.co.jp/
MODEL: R3-BS
■R3-BS04, BS06, BS08, BS10, BS12, BS14, BS16
A
4 [.16]
5 [.20]
26.5
*
30 [1.18] 26 [1.02] 30 [1.18]
n– 4.5 [.28] dia. MTG HOLE
2 [.08] deep
[1.04]
DIN RAIL
(35 mm wide)
16.7
[.66]
120 [4.72]
*n = Number of slots × 2
SIZE
A
MODEL
R3-BS04
112 [4.40]
168 [6.61]
224 [8.82]
280 [11.02]
336 [13.23]
392 [15.43]
448 [17.64]
R3-BS06
R3-BS08
R3-BS10
R3-BS12
R3-BS14
R3-BS16
R3-BS SPECIFICATIONS
ES-8356 Rev.13 Page 3/5
https://www.m-system.co.jp/
MODEL: R3-BS
MOUNTING REQUIREMENTS unit: mm [inch]
■ MOUNTING DIRECTION
The unit must be mounted on a vertical panel. Mounting in any other angle will cause internal temperature to rise,
may shorten the product’s life expectation or deteriorate its performance.
UP
DOWN
■ VENTILATION & MAINTENANCE SPACE
Panel ceiling or wiring conduit (height ≤ 50 mm or 2 in.)
Maintain sufficient ventilation space. Do not mount the unit
directly above devices which radiate great heat such as
heaters, transformers or resistors.
Maintenance space is also required above and below the unit.
R3-BS
50 [2]
50 [2]
Panel bottom or wiring conduit (height ≤ 50 mm or 2 in.)
R3-BS SPECIFICATIONS
ES-8356 Rev.13 Page 4/5
https://www.m-system.co.jp/
MODEL: R3-BS
■ R3-BS02, BS02P
■ R3-BS04, BS06, BS08, BS10, BS12, BS14, BS16
30
30
26
30
[1.18]
[1.18] [1.02] [1.18]
4–M4
n–M4
*
*n = Number of slots × 2
Specifications are subject to change without notice.
R3-BS SPECIFICATIONS
ES-8356 Rev.13 Page 5/5
https://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明