R30BS [MSYSTEM]

Remote I/O R30 Series INSTALLATION BASE;
R30BS
型号: R30BS
厂家: M-SYSTEM    M-SYSTEM
描述:

Remote I/O R30 Series INSTALLATION BASE

文件: 总5页 (文件大小:613K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
MODEL: R30BS  
Remote I/O R30 Series  
GENERAL SPECIFICATIONS  
Capacity:  
R30BS00: I/O module, 0 slot (Model: TR30, DL30 single use)  
R30BS02: I/O module, 2 slots  
R30BS04: I/O module, 4 slots  
R30BS04: I/O module, 6 slots  
R30BS08: I/O module, 8 slots  
R30BS12: I/O module, 12 slots  
R30BS16: I/O module, 16 slots  
INSTALLATION BASE  
Functions & Features  
· Installation base dedicated to Remote I/O R30 Series,  
Paperless Recorder TR30 Series and Field Logger DL30  
Series  
INSTALLATION  
Operating temperature: -10 to +55°C (14 to 131°F)  
Storage temperature: -20 to +65°C (-4 to +149°F)  
Operating humidity: 10 to 90 %RH (non-condensing)  
Atmosphere: No corrosive gas or heavy dust  
Mounting: Surface or DIN rail  
Weight (Without modules mounted)  
R30BS00: approx. 50 g (1.76 oz)  
R30BS02: approx. 100 g (0.22 lb)  
R30BS04: approx. 160 g (0.35 lb)  
MODEL: R30BS[1][2]  
R30BS06: approx. 210 g (0.46 lb)  
R30BS08: approx. 260 g (0.57 lb)  
ORDERING INFORMATION  
• Code number: R30BS[1][2]  
Specify a code from below for each of [1] and [2].  
(e.g. R30BS16/Q)  
R30BS12: approx. 360 g (0.79 lb)  
R30BS16: approx. 470 g (1.04 lb)  
PERFORMANCE  
Dielectric strength: 1500 V AC @ 1 minute (Internal power  
• Specify the specification for option code /Q  
(e.g. /C01)  
or internal bus to FE; isolated on the power supply module)  
[1] NUMBER OF SLOTS  
00: 0 slot  
STANDARDS & APPROVALS  
EU conformity:  
02: 2 slots  
EMC Directive  
04: 4 slots  
EMI EN 61000-6-4  
06: 6 slots  
EMS EN 61000-6-2  
RoHS Directive  
08: 8 slots  
12: 12 slots  
16: 16 slots  
[2] OPTIONS  
blank: none  
/Q: With options (specify the specification)  
SPECIFICATIONS OF OPTION: Q  
COATING (For the detail, refer to M-System's web site.)  
Only solder side of the main PWB is coated.  
/C01: Silicone coating  
/C02: Polyurethane coating  
/C03: Rubber coating  
R30BS SPECIFICATIONS  
ES-9008 Rev.5 Page 1/5  
https://www.m-system.co.jp/  
MODEL: R30BS  
EXTERNAL VIEW  
Mount the power supply module and network module on the dedicated slots (PWR and COM), and do not mount on I/O slots.  
PWR slot is on the left end and COM slot is on the immediate right of PWR slot. The I/O slots are numbered in the ascending  
order starting from the one on the immediate right of the network module (slot 1, slot 2...).  
For model: TR30 or DL30, mount it on the PWR and COM slot.  
PWR COM  
I/O1  
I/O n  
EXTERNAL DIMENSIONS unit: mm [inch]  
■R30BS00  
2–4.5 [.28] dia. MTG HOLE  
3 [.12] deep  
50 [1.97]  
4 [.16]  
(5 [.20])  
24 [.94]  
DIN RAIL  
35mm wide  
50 [1.97]  
110 [4.33]  
R30BS SPECIFICATIONS  
ES-9008 Rev.5 Page 2/5  
https://www.m-system.co.jp/  
MODEL: R30BS  
■R30BS02  
5–4.5 [.28] dia.  
MTG HOLE  
3 [.12] deep  
4 [.16]  
100 [3.94]  
(5 [.20])  
24 [.94]  
DIN RAIL  
35mm wide  
50 [1.97]  
110 [4.33]  
■R30BS04, BS06, BS08, BS12, BS16  
n – 4.5 [.28] dia.  
MTG HOLE  
3 [.12] deep  
A
4 [.16]  
(5 [.20])  
24 [.94]  
DIN RAIL  
35mm wide  
50 [1.97]  
110 [4.33]  
MODEL  
R30BS04  
R30BS06  
R30BS08  
R30BS12  
R30BS16  
A (SIZE)  
150 [5.91]  
200 [7.87]  
250 [9.84]  
350 [13.78]  
450 [17.72]  
n (NUMBER OF SCREWS)  
8
11  
14  
20  
26  
R30BS SPECIFICATIONS  
ES-9008 Rev.5 Page 3/5  
https://www.m-system.co.jp/  
MODEL: R30BS  
MOUNTING REQUIREMENTS unit: mm [inch]  
MOUNTING DIRECTION  
Mount the unit vertically as is shown in the figure below. Mounting in other directions may cause heat build-up inside the unit  
and lead to shorten its life span or degrade its performance.  
UP  
DOWN  
MOUNTING ON CONTROL PANEL  
Secure sufficient ventilation space. Do not mount the unit right above devices  
which radiate great heat such as heaters, transformers or resistors.  
Maintenance space is also required above and below the unit.  
Panel ceiling or wiring conduit (height ≤ 50 mm or 2 in.)  
Base  
50 [2]  
50 [2]  
Panel bottom or wiring conduit (height ≤ 50 mm or 2 in.)  
R30BS SPECIFICATIONS  
ES-9008 Rev.5 Page 4/5  
https://www.m-system.co.jp/  
MODEL: R30BS  
R30BS00  
R30BS02  
(100 [3.94])  
(50 [1.97])  
5–M4  
2 – M4  
13  
[.51]  
23.5  
[.93]  
26.1  
13  
[1.03]  
[.51]  
24.8  
[.98]  
24.8  
[.98]  
49.6  
[1.95]  
R30BS04, BS06, BS08, BS12, BS16  
(A)  
23.5  
[.93]  
26.1  
23.5  
[.93]  
n – M4  
13  
[1.03]  
[.51]  
24.8  
[.98]  
49.6  
[1.95]  
Specifications are subject to change without notice.  
R30BS SPECIFICATIONS  
ES-9008 Rev.5 Page 5/5  
https://www.m-system.co.jp/  

相关型号:

R30BS00

Remote I/O R30 Series INSTALLATION BASE
MSYSTEM

R30BS00/Q

Remote I/O R30 Series INSTALLATION BASE
MSYSTEM

R30BS02

Remote I/O R30 Series INSTALLATION BASE
MSYSTEM

R30BS02/Q

Remote I/O R30 Series INSTALLATION BASE
MSYSTEM

R30BS04

Remote I/O R30 Series INSTALLATION BASE
MSYSTEM

R30BS04/Q

Remote I/O R30 Series INSTALLATION BASE
MSYSTEM

R30BS06

Remote I/O R30 Series INSTALLATION BASE
MSYSTEM

R30BS06/Q

Remote I/O R30 Series INSTALLATION BASE
MSYSTEM

R30BS08

Remote I/O R30 Series INSTALLATION BASE
MSYSTEM

R30BS08/Q

Remote I/O R30 Series INSTALLATION BASE
MSYSTEM

R30BS12

Remote I/O R30 Series INSTALLATION BASE
MSYSTEM

R30BS12/Q

Remote I/O R30 Series INSTALLATION BASE
MSYSTEM