R30EBS04/Q [MSYSTEM]
INSTALLATION BASE (R3 I/O module extension use);型号: | R30EBS04/Q |
厂家: | M-SYSTEM |
描述: | INSTALLATION BASE (R3 I/O module extension use) |
文件: | 总4页 (文件大小:241K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: R30EBS
Remote I/O R30 Series
CAUTION
• The internal bus communication period for R3 series I/O
modules installed on the R30EBS is as follows.
Internal bus communication period = 6 msec. × number of
I/O module + 10 msec. (Data update period of main CPU)
Example: Four R3 I/O modules
INSTALLATION BASE (R3 I/O module extension use)
6 msec. × 4 + 10 msec. = 34 msec.
Even when the R30EBS is mounted to the R30BS, the
internal bus communication period of R30 series is kept to
approx. 1 msec.
GENERAL SPECIFICATIONS
Capacity:
R30EBS04: I/O module, 4 slots
R30EBS08: I/O module, 8 slots
MODEL: R30EBS[1][2]
INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Storage temperature: -20 to +65°C (-4 to +149°F)
Operating humidity: 10 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Surface or DIN rail
ORDERING INFORMATION
• Code number: R30EBS[1][2]
Specify a code from below for each of [1] and [2].
(e.g. R30EBS08/Q)
• Specify the specification for option code /Q
(e.g. /C01)
Weight (Without modules mounted)
R30EBS04: approx. 150 g (0.33 lb)
R30EBS08: approx. 280 g (0.62 lb)
[1] NUMBER OF I/O SLOTS
04: 4 slots
PERFORMANCE
Dielectric strength: 1500 V AC @ 1 minute (Internal power
08: 8 slots
or internal bus to FE; isolated on the power supply module)
[2] OPTIONS
blank: none
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
Only solder side of the main PWB is coated.
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
FUNCTIONS & FEATURES
Installation base to add R3 series I/O modules to R30
modules. Install with R30BS to extend. The type and
number of slot of available R3 series I/O module is limited
by power supply module and network module. Refer to the
specification and instruction manual for each module.
R30EBS SPECIFICATIONS
ES-9021 Rev.2 Page 1/4
http://www.m-system.co.jp/
MODEL: R30EBS
EXTERNAL VIEW
Use in combination with R30BS. Mount the R3 I/O Modules from the left end (I/O 1) to the right.
PWR COM I/O 1
I/O n
I/O 1
I/O 2
I/O n
EXTERNAL DIMENSIONS unit: mm (inch)
■ R30EBS04, 08
6 (.24)
A
4 (.18)
26.5
(1.04)
*
30
(1.18)
26
(1.02)
30
(1.18)
n–4.5 (.18) dia.
MTG HOLE
[5 (.20)]
2 (.08) deep
DIN RAIL
35mm wide
16.7
(.66)
*n = Number of slots x 2
120 (4.72)
MODEL
A (SIZE)
112
n (NUMBER OF SCREWS)
R30EBS04
R30EBS08
8
224
16
R30EBS SPECIFICATIONS
ES-9021 Rev.2 Page 2/4
http://www.m-system.co.jp/
MODEL: R30EBS
MOUNTING REQUIREMENTS unit: mm (inch)
■ MOUNTING DIRECTION
The unit must be mounted on a vertical panel. Mounting in any other angle will cause internal temperature to rise,
may shorten the product’s life expectation or deteriorate its performance.
UP
DOWN
■ MOUNTING ON CONTROL PANEL
Secure sufficient ventilation space. Do not mount the unit right above devices
which radiate great heat such as heaters, transformers or resistors.
Maintenance space is also required above and below the unit.
Panel ceiling or wiring conduit (height ≤ 50 mm or 2 in.)
Base
50 (2)
50 (2)
Panel bottom or wiring conduit (height ≤ 50 mm or 2 in.)
R30EBS SPECIFICATIONS
ES-9021 Rev.2 Page 3/4
http://www.m-system.co.jp/
MODEL: R30EBS
30
30
26
(1.18)
(1.18) (1.02)
*
n-M4
*n = Number of slots x 2
Specifications are subject to change without notice.
R30EBS SPECIFICATIONS
ES-9021 Rev.2 Page 4/4
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明