R30YV4S/Q [MSYSTEM]
Remote I/O R30 Series DC VOLTAGE OUTPUT MODULE;
| 型号： | R30YV4S/Q |
| 厂家： | 
M-SYSTEM |
| 描述： | Remote I/O R30 Series DC VOLTAGE OUTPUT MODULE 输出元件 |
| 文件： | 总5页 (文件大小：183K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: R30YV4
Remote I/O R30 Series
RELATED PRODUCTS
• PC configurator software (model: R30CFG)
Downloadable at M-System’s web site.
DC VOLTAGE OUTPUT MODULE
(4 points, isolated)
For connecting to PC, use commercially available Mini-B
type USB cable. (provided by user)
Functions & Features
• 4 channels for DC voltage output remote I/O module
• Isolation between output channels
• Output range of each channel is individually adjustable
with PC configurator
GENERAL SPECIFICATIONS
Connection
Internal bus: Via the Installation Base (model: R30BS)
Output: M3 separable screw terminal (torque 0.5 N·m)
Internal power: Via the Installation Base (model: R30BS)
Solderless terminal: Refer to the drawing at the end of the
section.
25 [.98]
Recommended manufacturer: Japan Solderless Terminal
MFG. Co., Ltd., Nichifu Co., Ltd.
110
[4.33]
(Solderless terminals with insulation sleeve do not fit.)
Applicable wire size: 0.25 to 0.75 mm
2
Screw terminal: Nickel-plated steel
Isolation: Output 1 to output 2 to output 3 to output 4 to
internal bus or internal power
98
[3.86]
mm [inch]
Output range: Selectable with PC configurator software
(model: R30CFG)
Output at the loss of communication: Selectable with PC
configurator software (Model: R30CFG, factory default:
output hold)
MODEL: R30YV4S[1]
Status indicator LED: RUN, ERR
ORDERING INFORMATION
• Code number: R30YV4S[1]
Specify a code from below for [1].
(e.g. R30YV4S/Q)
(refer to the instruction manual)
■Recommended solderless terminal size - M3 (unit: mm)
3 max.
3.2 dia.
• Specify the specification for option code /Q
(e.g. /C01/SET)
NO. OF CHANNELS
4: 4
12 max.
COMMUNICATION MODE
S: Single
OUTPUT SPECIFICATIONS
Module type: Analog output, 4 points
Output range: -10 - +10V DC (*), -5 - +5V DC, 0 - 10V DC,
0 - 5V DC, 1 - 5V DC
[1] OPTIONS
blank: none
(*) Factory default
Load resistance: ≥ 100 kΩ
/Q: With options (specify the specification)
Operational range:
Except -10 to +10 V DC: -15 to +115 % of output range
-10 to +10 V DC: Approx. -11.5 to +11.5 V DC
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
INSTALLATION
/C02: Polyurethane coating
Current consumption: 60 mA
/C03: Rubber coating
Operating temperature: -10 to +55°C (14 to 131°F)
Storage temperature: -20 to +65°C (-4 to +149°F)
Operating humidity: 10 to 90 %RH (non-condensing)
EX-FACTORY SETTING
/SET: Preset according to the Ordering Information Sheet
(No. ESU-9005)
R30YV4 SPECIFICATIONS
ES-9005 Rev.3 Page 1/5
https://www.m-system.co.jp/
MODEL: R30YV4
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R30BS)
Weight: 160 g (0.35 lb)
PERFORMANCE
Conversion accuracy: ±0.1 %
Conversion rate: 10 msec.
Data range: 0 – 10000 of the output range
Data allocation: 4
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Output delay time: ≤ 250 msec. (0 - 90 %)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute (output 1 to
output 2 to output 3 to output 4 to internal bus or internal
power)
1500 V AC @ 1 minute (power input to FE; isolated by the
power supply module)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
FUNCTIONS
■ Output at the loss of communication
• Output Hold
If the network module is in error, the module holds the
signal at error and stands by until the communication
recovers.
• Output set value
If the network module is in error, the module holds the
signal at error or power up and stands by until the
communication recovers. The signal at error or power up is
selectable with PC configurator software (Model: R30 CFG)
Not depending on output at the loss of communication
setting, when power up the module holds the signal at error
or power up and stands by until the normal data is received.
R30YV4 SPECIFICATIONS
ES-9005 Rev.3 Page 2/5
https://www.m-system.co.jp/
MODEL: R30YV4
CONFIGURATOR SOFTWARE SETTING
The following parameters can be set with using PC Configurator Software (model: R30CFG)
Refer to the users manual for the R30CFG for detailed operation of the software program.
■ CHANNEL INDIVIDUAL SETTING
PARAMETER
Unused setting
SETTING RANGE
CH enabled
CH disabled
-10 – +10V DC
-5 – +5V DC
0 – 10V DC
DEFAULT SETTING
CH enabled
Output range
-10 – +10V DC
0 – 5V DC
1 – 5V DC
Fine zero adjustment -320.00 – +320.00 (%) 0.00 (%)
Fine gain adjustment -3.2000 – +3.2000
1.0000
0
Scaled range zero
Scaled range span
Output range at
-32 000 – +32 000
-32 000 – +32 000
10 000
-15.00 – +115.00 (%) -15.00 (%)
communication
failure or power up
■ CHANNEL BATCH SETTING
PARAMETER
SETTING RANGE
DEFAULT SETTING
Simulate output
Normal output
Simulation data
Normal output
Output at the loss of
communication
Hold the output data
User set data output
Hold the output
data
EXTERNAL VIEW
■ SIDE VIEW
■ FRONT VIEW
Positioning Guide
Specifications
RUN LED
ERR LED
RUN
ERR
Output Terminal Block
Terminal Fixing Screw
Terminal Cover
■ BOTTOM VIEW
Base Fixing Screw
Lock Tab
R30YV4 SPECIFICATIONS
ES-9005 Rev.3 Page 3/5
https://www.m-system.co.jp/
MODEL: R30YV4
TERMINAL ASSIGNMENTS
NO. ID
FUNCTION
NO. ID
FUNCTION
1
V1
11
1
2
3
4
5
6
7
8
9
V1 Voltage Output 1
V2 Voltage Output 2
V3 Voltage Output 3
V4 Voltage Output 4
NC No connection
NC No connection
NC No connection
NC No connection
NC No connection
11 COM1 Common 1
COM1
2
3
4
5
12 COM2 Common 2
V2
V3
V4
12
13 COM3 Common 3
COM2
14 COM4 Common 4
13
COM3
15 NC No connection
16 NC No connection
17 NC No connection
18 NC No connection
19 NC No connection
20 NC No connection
14
COM4
NC
15
NC
6
NC
16
NC
7
10 NC No connection
NC
17
NC
8
NC
18
NC
9
NC
10
NC
19
NC
20
NC
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
25 [.98]
98 [3.86]
20–M3
SCREW
①
⑪
⑫
⑬
⑭
⑮
⑯
⑰
⑱
⑲
⑳
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
R30YV4 SPECIFICATIONS
ES-9005 Rev.3 Page 4/5
https://www.m-system.co.jp/
MODEL: R30YV4
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
RUN ERR
indicator indicator
Output circuit
1
11
2
V1
OUTPUT1
Comm.
Circuit
INTERNAL BUS
COM1
V2
Output circuit
Output circuit
OUTPUT2
OUTPUT3
OUTPUT4
12
3
COM2
V3
INTERNAL POWER
Control
Circuit
5
6
13
4
COM3
V4
Output circuit
7
14
COM4
8
9
10
15
16
17
18
19
20
Specifications are subject to change without notice.
R30YV4 SPECIFICATIONS
ES-9005 Rev.3 Page 5/5
https://www.m-system.co.jp/
相关型号：
R3107003K00
CAPACITOR, TANTALUM, SOLID, POLARIZED, 3V, 100uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
©2020 ICPDF网 联系我们和版权申明