R3Y-YV8S/CE [MSYSTEM]
Remote I/O R3 Series DC VOLTAGE OUTPUT MODULE;型号: | R3Y-YV8S/CE |
厂家: | M-SYSTEM |
描述: | Remote I/O R3 Series DC VOLTAGE OUTPUT MODULE 输出元件 |
文件: | 总4页 (文件大小:122K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: R3-YV8
Remote I/O R3 Series
GENERAL SPECIFICATIONS
Connection
Internal bus: Via the Installation Base (model: R3-BSx)
Output: M3 separable screw terminal (torque 0.5 N·m)
Internal power: Via the Installation Base (model: R3-BSx)
Screw terminal: Nickel-plated steel
DC VOLTAGE OUTPUT MODULE
(8 points, isolated)
27.5 [1.08]
Isolation: Output 1 to output 2 to output 3 to output 4 to
output 5 to output 6 to output 7 to output 8 to internal bus
or internal power
130
[5.12]
Output range: Selectable with the side DIP SW per 4 points
Output hold function: Setting for communication error with
side DIP SW
RUN indicator: Bi-color (red/green) LED;
Red when the bus A operates normally;
Green when the bus B operates normally;
Amber when both buses operate normally.
ERR indicator: Green LED turns on in normal operating
conditions.
109
[4.29]
mm [inch]
MODEL: R3-YV8[1][2]
ORDERING INFORMATION
• Code number: R3-YV8[1][2]
OUTPUT SPECIFICATIONS
■ Narrow Span: -1 – +1 V, 0 – 1 V DC
Load resistance: 10 kΩ min.
Specify a code from below for each of [1] and [2].
(e.g. R3-YV8W/CE/Q)
■ Wide Span: -10 – +10 V, -5 – +5 V, 0 – 10 V, 0 – 5 V, 1 – 5
V DC
• Specify the specification for option code /Q
(e.g. /C01/SET)
Load resistance: 10 kΩ min.
■ Output Range
NO. OF CHANNELS
8: 8
Except -10 to +10 V DC: -15 to +115 % of output range
-10 to +10 V DC: Approx. -11.5 to +11.5 V DC
[1] COMMUNICATION MODE
S: Single
INSTALLATION
W: Dual
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R3-BSx)
Weight: 250 g (0.55 lb)
[2] OPTIONS (multiple selections)
Standards & Approvals
blank: Without CE
/CE: CE marking
Other Options
PERFORMANCE
Conversion accuracy: ±0.1 %
blank: none
/Q: Option other than the above (specify the specification)
(±0.2 % with 0 – 5 V or 1 – 5 V range)
Data range: 0 – 10000 of the output range
Data allocation: 8
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
Current consumption: 200 mA
Temp. coefficient: ±0.015 % /°C (±0.008 %/°F)
(±0.03 % /°C [±0.02 %/°F] with 0 – 5 V or 1 – 5 V range)
Response time: ≤ 0.2 sec. (0 – 90 %)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1000 V AC @ 1 minute
(output 1 to output 2 to output 3 to output 4 to output 5 to
output 6 to output 7 to output 8 to internal bus or internal
power)
/C02: Polyurethane coating
/C03: Rubber coating
EX-FACTORY SETTING
/SET: Preset according to the Ordering Information Sheet
(No. ESU-8396)
R3-YV8 SPECIFICATIONS
ES-8396 Rev.11 Page 1/4
https://www.m-system.co.jp/
MODEL: R3-YV8
2000 V AC @ 1 minute (power input to FG;
isolated on the power supply module)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
FUNCTIONS
■OUTPUT HOLD or OUTPUT OFF
In normal conditions, the module outputs the signal from
the preferred bus A. When an error is detected, the output
is switched to the data from the bus B.
•Output Hold
If both are in error, the module holds the signal and stands
by until one of the communications recovers.
•Output OFF
If both are in error, the module outputs -15 % (or approx.
-11.5 V) and stands by until one of the communications
recovers.
At the startup, it outputs -15 % (or approx. -11.5 V) until the
communication is established and normal data is received.
EXTERNAL VIEW
■ SIDE VIEW
■ FRONT VIEW
RUN LED
1
2
15
16
17
18
19
20
21
22
23
24
25
26
27
28
ERR LED
3
4
Functions
5
SW1
SW2
SW3
ON
6
Range
Output
Hold
7
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
Output 1-4 (SW1)
or
Output 5-8 (SW2)
8
9
10
11
12
13
14
ON
ON
R3-YV8 SPECIFICATIONS
ES-8396 Rev.11 Page 2/4
https://www.m-system.co.jp/
MODEL: R3-YV8
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
27.5 [1.08]
109 [4.29]
POSITIONING
GUIDE
1
15
2
16
3
17
4
18
5
19
6
28–M3
SCREW
20
7
21
8
22
9
23
10
24
11
25
12
26
13
27
14
28
TERMINAL
COVER
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
RUN LED ERR LED DIP SW
Output Circuit
INTERNAL BUS A
Communication
Circuit
1
+
+
–
+
+
–
+
+
–
+
+
–
+
+
–
+
+
–
+
+
–
+
+
–
*INTERNAL BUS B
WIDE SPAN
2
OUTPUT 1
OUTPUT 2
OUTPUT 3
OUTPUT 4
OUTPUT 5
OUTPUT 6
OUTPUT 7
OUTPUT 8
NARROW SPAN
Control
Circuit
3
Output Circuit
Output Circuit
Output Circuit
Output Circuit
Output Circuit
Output Circuit
Output Circuit
INTERNAL POWER
4
WIDE SPAN
NARROW SPAN
5
13
14
27
28
6
7
WIDE SPAN
NARROW SPAN
8
9
10
11
12
15
16
17
18
19
20
21
22
23
24
25
26
WIDE SPAN
NARROW SPAN
WIDE SPAN
NARROW SPAN
WIDE SPAN
NARROW SPAN
WIDE SPAN
NARROW SPAN
WIDE SPAN
NARROW SPAN
*For dual redundant communication.
Note: Connect either wide or narrow span terminals for each channel.
R3-YV8 SPECIFICATIONS
ES-8396 Rev.11 Page 3/4
https://www.m-system.co.jp/
MODEL: R3-YV8
Specifications are subject to change without notice.
R3-YV8 SPECIFICATIONS
ES-8396 Rev.11 Page 4/4
https://www.m-system.co.jp/
相关型号:
R4-C-BLK-BLK-F-F-0
Rocker Switch, SPDT, Latched, Quick Connect Terminal, Rocker Actuator, Panel Mount
E-SWITCH
R4-C-BLK-BLK-G-F-0
Rocker Switch, SPDT, Latched, Quick Connect Terminal, Rocker Actuator, Panel Mount
E-SWITCH
R4-C-BLK-BLK-I-F-0
Rocker Switch, SPDT, Latched, Quick Connect Terminal, Rocker Actuator, Panel Mount
E-SWITCH
R4-D-BLK-BLK-D-F-0
Rocker Switch, SPDT, Latched, Quick Connect Terminal, Rocker Actuator, Panel Mount
E-SWITCH
R4-D-BLK-BLK-F-F-0
Rocker Switch, SPDT, Latched, Quick Connect Terminal, Rocker Actuator, Panel Mount
E-SWITCH
R4-D-BLK-BLK-G-F-0
Rocker Switch, SPDT, Latched, Quick Connect Terminal, Rocker Actuator, Panel Mount
E-SWITCH
R4-D-BLK-BLK-I-F-0
Rocker Switch, SPDT, Latched, Quick Connect Terminal, Rocker Actuator, Panel Mount
E-SWITCH
R4-E-BLK-BLK-D-F-0
Rocker Switch, SPDT, Momentary, Quick Connect Terminal, Rocker Actuator, Panel Mount
E-SWITCH
©2020 ICPDF网 联系我们和版权申明