R5-YV1W/Q [MSYSTEM]
Remote I/O R5 Series;
| 型号： | R5-YV1W/Q |
| 厂家： | 
M-SYSTEM |
| 描述： | Remote I/O R5 Series |
| 文件： | 总3页 (文件大小：112K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: R5-YV
power
Remote I/O R5 Series
Output range: Selectable with the side DIP SW
RUN indicator: Bi-color (red/green) LED;
Red when the bus A operates normally;
Green when the bus B operates normally;
Amber when both buses operate normally.
DC VOLTAGE OUTPUT MODULE
18 (.71)
OUTPUT SPECIFICATIONS
■ Narrow Span: -1 – +1 V, 0 – 1 V DC
Load resistance: 10 kΩ min.
90
(3.54)
■ Wide Span: -10 – +10 V, -5 – +5 V, 0 – 10 V, 0 – 5 V, 1 – 5
V DC
96.5
(3.80)
mm (inch)
Load resistance: 10 kΩ min.
■ Output Range
MODEL: R5-YV[1][2][3]
Except -10 to +10 V DC: -15 to +115 % of output range
-10 to +10 V DC: Approx. -11.5 to +11.5 V DC
ORDERING INFORMATION
• Code number: R5-YV[1][2][3]
Specify a code from below for each [1] through [3].
(e.g. R5-YV2W/Q)
INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R5-BS)
Weight: 100 g (3.53 oz)
• Specify the specification for option code /Q
(e.g. /C01)
[1] NO. OF CHANNELS
1: 1
2: 2
PERFORMANCE
Output range v.s. conversion accuracy
(Narrow span) -1 – +1 V DC : ±0.1 (%)
0 – 1 V DC : ±0.1
[2] COMMUNICATION MODE
S: Single
(Wide span) -10 – +10 V DC : ±0.05
-5 – +5 V DC : ±0.05
W: Dual
0 – 10 V DC : ±0.05
[3] OPTIONS
0 – 5 V DC : ±0.05
blank: none
1 – 5 V DC : ±0.05
/Q: With options (specify the specification)
Data range: 0 – 10000 of the output range
Data allocation: 1 (2 for 2-channel type)
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: ≤ 0.2 sec. (0 – 90 %)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(output 1 to output 2 to internal bus or internal power)
2000 V AC @ 1 minute (power input to FG; isolated on the
power supply module)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
GENERAL SPECIFICATIONS
Connection
Internal bus: Via the Installation Base (model: R5-BS)
Output: Euro type connector terminal
(Applicable wire size: 0.2 – 2.5 mm
2
(AWG24 - 12),
stripped length 7 mm)
Internal power: Via the base (model: R5-BS)
Isolation: Output 1 to output 2 to internal bus or internal
R5-YV SPECIFICATIONS
ES-6122 Rev.7 Page 1/3
http://www.m-system.co.jp/
MODEL: R5-YV
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
FUNCTIONS
Output hold function:
In normal conditions, the module outputs the signal from
the preferred bus A.
When an error is detected, the output is switched to the
data from the bus B.
If both are in error, the module holds the signal and stands
by until one of the communications recovers.
At the startup, it outputs -15 % (or approx. -11.5 V) of the
selected range until the communication is established and
normal data is received.
EXTERNAL VIEW
FRONT VIEW
SIDE VIEW
RUN
RUN LED
1 2 3 4 5 6 7 8
Output 1 Output 2
4
1
5
2
6
3
Euro Type
Connector Terminals
R5-YV SPECIFICATIONS
ES-6122 Rev.7 Page 2/3
http://www.m-system.co.jp/
MODEL: R5-YV
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
LOCKING CLAMP
18 (.71)
6.5
90 (3.54)
(.26)
4
1
5
2
6
3
POSITIONING GUIDE
*
* Euro type connector terminals (4, 5 and 6) provided only with 2-ch. option.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
RUN LED DIP SW
Isolation
INTERNAL BUS A
Communication
1
*INTERNAL BUS B
+
+
–
Circuit
WIDE SPAN
NARROW SPAN
2
Control
Circuit
OUTPUT 1
3
INTERNAL POWER
Isolation
4
5
6
+
+
–
WIDE SPAN
NARROW SPAN
OUTPUT 2
*For dual redundant communication.
Note: Connect either wide or narrow span terminals for each channel.
The section enclosed by broken line is with 2-ch. option.
Specifications are subject to change without notice.
R5-YV SPECIFICATIONS
ES-6122 Rev.7 Page 3/3
http://www.m-system.co.jp/
相关型号：
©2020 ICPDF网 联系我们和版权申明