R7E-YV2-R/Q [MSYSTEM]
Remote I/O R7 Series ETHERNET I/O MODULE;型号: | R7E-YV2-R/Q |
厂家: | M-SYSTEM |
描述: | Remote I/O R7 Series ETHERNET I/O MODULE 以太网:16GBASE-T |
文件: | 总31页 (文件大小:905K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: R7E
Remote I/O R7 Series
[2] OPTIONS
blank: none
/Q: With options (specify the specification)
ETHERNET I/O MODULE
(Modbus/TCP)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
EX-FACTORY SETTING
/SET: Preset according to the Ordering Information Sheet
(No. ESU-7807-x)
ORDERING INFORMATION
• Basic module: R7E-[1]-R[2]
EXTENSION MODULE: R7E–[1][2]
Specify a code from below for each of [1] and [2].
(e.g. R7E-DC16A-R/Q)
[1] I/O TYPE
EA8: Discrete input, 8 points
• Specify the specification for option code /Q
(e.g. /C01/SET)
EA16: Discrete input, 16 points
EC8A: NPN transistor output, 8 points
EC16A: NPN transistor output, 16 points
EC8B: PNP transistor output, 8 points
EC16B: PNP transistor output, 16 points
• Extension module: R7E-[1][2]
Specify a code from below for each of [1] and [2].
(e.g. R7E-EC16B/Q)
• Specify the specification for option code /Q
(e.g. /C01)
[2] OPTIONS
blank: none
/Q: Option other than the above (specify the specification)
BASIC MODULE: R7E–[1]–R[2]
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
[1] I/O TYPE
DA16: Discrete input, 16 points
DC16A: NPN transistor output, 16 points
DC16B: PNP transistor output, 16 points
SV4: DC voltage/current input (10 V/20 mA), 4 points
TS4: Thermocouple input, 4 points
RS4: RTD input, 4 points
/C02: Polyurethane coating
/C03: Rubber coating
FUNCTIONS & FEATURES
MS4: Potentiometer input, 4 points
CT4E: AC current input, 4 points,
clamp-on current sensor CLSE use
PA8: Totalized pulse input, 8 points,
(CE not available)
The R7E interfaces analog and discrete I/O signals with a
PLC or PC via Ethernet Modbus/TCP nerwork.
A ‘basic’ module can be attached with an ‘extension’
module. By combining two modules, single station can
handle mixed analog and discrete signals, 32-point discrete
inputs, 32-point discrete outputs, 16-point discrete I/Os and
other
YV2: DC voltage output, 2 points
YS2: DC current output, 2 points
combinations of signals.
Input sensor type (thermocouple, RTD) and range can be
selected with the front DIP switches for all channels. In
order to set different selections for individual channels, the
PC Configurator Software (model: R7CON) is used.
POWER INPUT
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 1/31
http://www.m-system.co.jp/
MODEL: R7E
R7E-EC16A: Approx. 20 mA, 150 g (5.3 oz)
RELATED PRODUCTS
R7E-EC8B: Approx. 10 mA, 90 g (3.2 oz)
R7E-EC16B: Approx. 20 mA, 150 g (5.3 oz)
■ Recommended solderless terminal
• PC configurator software (model: R7CON)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
3.3 (.13) max
• Clamp-on current sensor (model: CLSE)
For R7E-CT4E, the clamp-on current sensors must be
ordered separately. Required number depends upon the
channel number.
mm (inch)
ETHERNET COMMUNICATION
Physical layer standard: IEEE 802.3u
Data link layer: 10BASE-T / 100BASE-TX
Baud rate: 10 / 100 Mbps, Auto Negotiation
Protocol: Modbus/TCP
Note: PC Configurator Software is required to set IP address.
GENERAL SPECIFICATIONS
• Common Specifications
Data: RTU (binary)
Power input: 24 V DC ±10 %; ripple 10 %p-p max.
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @1 minute
(between isolated circuits)
Max. number of socket connections: Two (2)
Transmission media: 10BASE-T (STP cable, category 5)
100BASE-TX (STP cable, category 5e)
Max. segment length: 100 meters
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Storage temperature: -20 to +65°C (-4 to +149°F)
Mounting: DIN rail (35 mm wide)
IP address: 192.168.0.1 (factory setting); Selectable with PC
Configurator Software (model: R7CON)
Port No.: 502
Ethernet indicator LED: LINK, LINK100, COL
Connection
STANDARDS & APPROVALS
EU conformity:
Ethernet: RJ-45 connector
Power & I/O: M3 separable screw terminals
(torque 0.5 N·m)
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
Screw terminal material: Nickel-plated steel
Solderless terminal: Refer to the drawing at the end of the
section.
EN 50581
Recommended manufacturer: Japan Solderless Terminal
MFG.Co.Ltd, Nichifu Co.,ltd
Applicable wire size: 0.25 to 1.65 mm (AWG22 to 16)
2
Housing material: Flame-resistant resin (gray)
Status indicator LEDs: PWR, RUN
■ Current Consumption & Weight
R7E-DA16: Approx. 74 mA, 200 g (7.0 oz)
R7E-DC16A: Approx. 86 mA, 200 g (7.0 oz)
R7E-DC16B: Approx. 86 mA, 200 g (7.0 oz)
R7E-SV4: Approx. 97 mA, 200 g (7.0 oz)
R7E-TS4: Approx. 97 mA, 200 g (7.0 oz)
R7E-RS4: Approx. 97 mA, 200 g (7.0 oz)
R7E-MS4: Approx. 97 mA, 200 g (7.0 oz)
R7E-CT4E: Approx. 90 mA, 200 g (7.0 oz)
R7E-PA8: Approx. 80 mA, 200 g (7.0 oz)
R7E-YV2: Approx. 115 mA, 180 g (6.3 oz)
R7E-YS2: Approx. 161 mA, 180 g (6.3 oz)
R7E-EA8: Approx. 10 mA, 90 g (3.2 oz)
R7E-EA16: Approx. 20 mA, 150 g (5.3 oz)
R7E-EC8A: Approx. 10 mA, 90 g (3.2 oz)
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 2/31
http://www.m-system.co.jp/
MODEL: R7E
EXTERNAL VIEW
■ BASIC MODULE
• SIDE VIEW
• FRONT VIEW
Operating Mode Setting DIP SW (SW1)
PC Configurator Jack
Discrete I/O Status Indicator LED
1
*
Status Indicator LED
1
2 3 4 5 6 7 8
PWR
LINK
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
COL
RUN
LINK100
CNFG.
4
5
6
7
10 11 12 13 14 15 16 17 18
1
2
3
1
2
3
4
5
6
7
8
9
2
*
I/O Terminals
RJ-45 Connector
Power Supply Terminals
*1. Not available with analog I/O modules.
*2. 10 screw terminals for analog output modules.
■ EXTENSION MODULE
• DISCRETE, 8 POINTS
Discrete I/O Status Indicator LED
0
1
2
3
4
5
6
7
6
7
8
9
10
1
2
3
4
5
I/O Terminals
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 3/31
http://www.m-system.co.jp/
MODEL: R7E
• DISCRETE, 16 POINTS
Discrete I/O Status Indicator LED
0
1 2 3 4 5 6 7 8 9 A B C D E F
10 11 12 13 14 15 16 17 18
1
2
3
4
5
6
7
8
9
I/O Terminals
■ DISCRETE I/O & TOTALIZED PULSE INPUT STATUS INDICATOR LED
Discrete I/O modules, including those for extensions, have LED indicators showing I/O signal status.
Totalized pulse modules have LED indicators showing input signal status.
ON : LED ON
OFF : LED OF
CONNECTION DIAGRAMS
I POWER SUPPLY TERMINAL ASSIGNMENT
4
5
6
7
NC
NC
+24 V
0V
1
2
3
NC
NC
FG
ID
NO.
FUNCTION, NOTES
----
----
FG
----
----
1
2
3
4
5
6
7
NC
NC
FG
NC
NC
Power input (24 V DC)
Power input (0 V)
+24 V
0 V
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 4/31
http://www.m-system.co.jp/
MODEL: R7E
MODBUS FUNCTION CODES & SUPPORTED CODES
■ Data & Control Functions
CODE NAME
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Read Coil Status
X
X
X
X
X
X
Digital output from the slave (read/write)
Read Input Status
Read Holding Registers
Read Input Registers
Force Single Coil
Status of digital inputs to the slave (read only)
General purpose register within the slave (read/write)
Collected data from the eld by the slave (read only)
Digital output from the slave (read/write)
Preset Single Register
Read Exception Status
Diagnostics
General purpose register within the slave (read/write)
X
Program 484
Poll 484
Fetch Comm. Event Counter
Fetch Comm. Event Log
Program Controller
Poll Controller
X
X
Fetch a status word and an event counter
A status word, an event counter, a message count and a eld of event bytes
Force Multiple Coils
Preset Multiple Registers
Report Slave ID
X
X
X
Digital output from the slave (read/write)
General purpose register within the slave (read/write)
Slave type / ‘RUN’ status
Program 884/M84
Reset Comm. Link
Read General Reference
Write General Reference
Mask Write 4X Register
Read/Write 4X Register
Read FIFO Queue
Exception Code
■
CODE
01
NAME
Illegal Function
X
X
X
Function code is not allowable for the slave
Address is not available within the slave
Data is not valid for the function
Illegal Data Address
Illegal Data Value
Slave Device Failure
Acknowledge
02
03
04
05
Slave Device Busy
Negative Acknowledge
Memory Parity Error
06
07
08
Diagnostic Subfunctions
■
CODE NAME
00
01
02
03
04
Return Query Data
X
Loop back test
Restart Comm. Option
Return Diagnostic Register
Change Input Delimiter Character
Force Slave to Listen Only Mode
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 5/31
http://www.m-system.co.jp/
MODEL: R7E
MODBUS I/O ASSIGNMENT
ADDRESS
DATA TYPE
DATA
Coil (0X)
1 – 16
17 – 32
1 – 16
Digital Output (discrete output of the basic module)
Digital Output (discrete output of the extension module)
Digital Input (discrete input of the basic module)
Digital Input (discrete input of the extension module)
Reserved (unused)
Inputs (1X)
17 – 32
33 – 48
49 – 64
65 – 80
Module Status
Reserved (unused)
Input Registers (3X)
1 –
4
I
Analog Input
5 – 16
17 – 24
25 – 48
----
F
Reserved (unused)
Analog Input
----
I
Reserved (unused)
Holding Registers (4X)
1 –
2
Analog Output
3 – 16
17 – 20
21 – 48
----
F
Reserved (unused)
Analog Output
----
Reserved (unused)
I : Integer, -1500 – +11500 (-15 – +115%)
F : Floating
Note: DO NOT access addresses other than mentioned above. Such access may cause problems such as inadequate operation.
■ STATUS
Analog input modules (models: R7E-SV4, R7E-TS4, R7E-RS4, R7E-MS4, R7E-CT4E) can show input status of each channel.
Analog output modules (models: R7E-YS2, R7E-YV2), discrete I/O modules (models: R7E-DA16, R7E-DC16A, R7E-DC16B)
and totalized pulse input (model: R7E-PA8) show ‘0’ at the same address.
15
0
Input 0 (Burnout, input range error)
Input 1 (Burnout, input range error)
Input 2 (Burnout, input range error)
Input 3 (Burnout, input range error)
Input 0 (ADC error)
Input 1 (ADC error)
Input 2 (ADC error)
Input 3 (ADC error)
Unused
:
Unused
Burnout, input range error (≤-15%, ≥+115%)
0 : Normal 1 : Error
ADC error (no response from ADC)
0 : Normal 1 : Error
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 6/31
http://www.m-system.co.jp/
MODEL: R7E
DATA CONVERSION
I 0 – 100% DATA CONVERSION
Analog input data is converted into digital representations of 0 – 100% proportional to each scaled range. The converted %
values are multiplied by 100 and expressed in 16 bits.
Overrange input is possible from -15 to +115% of the nominal range. When the signal exceeds the limit, the data is fixed at
-15% or +115% respectively. Negative value is represented in 2ʼs complements.
• Input Range 0 – 5 V DC
Converted Data, Decimal
Converted Data, Hex
Input Value
≤ -0.75 V
0 V
Input %
-15%
0%
-1500
0
FA24
0
10000
11500
5 V
100%
115%
2710
2CEC
≥ 5.75 V
11500 (2CEC)
10000 (2710)
-0.75
0
-1500 (FA24)
5.0
5.75
(V)
Analog output is converted in the reverse order of the input data. The output range 0 – 5 V DC is expressed as 10000 at
5.0 V (100%) and 0 at 0 V (0%).
I ENGINEERING UNIT CONVERSION
Engineering unit value °C or K is multiplied by 10 and expressed in 16 bits. °F data is represented in engineering unit
value, without multiplication. Engineering unit value A is multiplied by 100 or 1000, expressed in 16 bits. Negative value
is represented in 2ʼs complements.
• Input TYPE K Thermocouple
Converted Data, Decimal
Converted Data, Hex
Input Value
≤ -272°C
-150°C
-2720
-1500
13700
14720
F560
FA24
3584
3980
1370°C
≥ 1472°C
14720 (3980)
13700 (3584)
-272 -150
1370
1472
(°C)
-1500 (FA24)
-2720 (F560)
■ COUNT VALUE
The count value is 32-bit data. It is divided in 2 words of 16 bits represented with 2 addresses.The lower address is
allocated in the upper word (MSB) and the upper address in the lower word (LSB). The count value is 0 - 4 294 967 295.
The maximum count value available is 1 000 - 4 294 967 295. In case of overflow, the vaule is reset to 0 or 1
(configurable) from which the count will restart. The preset of the count value is also available. Use the R7CON or
host PC/PLC for the configuration.
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 7/31
http://www.m-system.co.jp/
MODEL: R7E
EXTENSION MODULE
A ‘basic’ module can be attached with one ‘extension’ module. The extension module is powered from the basic module.
By combining two modules, single station can handle mixed analog and discrete signals, 32-point discrete inputs, 32-point
discrete outputs, 16-point discrete I/Os and other combinations of signals.
■ OUTPUT AT THE LOSS OF COMMUNICATION
The extension module is set to ‘Hold Output’ by factory default setting. The PC Configurator software is used to change the
setting to ‘Reset Output.’
CONNECTING THE EXTENSION MODULE
1) Remove the extension connector cover located at the side of the basic module.
2) Connect the extension module.
3) Mount the combined module on a DIN rail.
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
■ BASIC MODULE
115 (4.53)
17 (.66)
54 (2.13)
RJ-45 CONNECTOR
DIN RAIL
35mm wide
4
5
6
7
10 11 12 13 14 15 16 17 18
1
2
3
1
2
3
4
5
6
7
8
9
30 (1.18)
[5 (.20)]
65 (2.56)
• R7E-TS4
6 (.24)
6 (.24)
17 (.66)
54 (2.13)
7–M3 SCREW
TERMINALS for POWER
18–M3 SCREW
TERMINALS for I/O
DIN RAIL
35mm wide
30 (1.18)
[5 (.20)]
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 8/31
http://www.m-system.co.jp/
MODEL: R7E
■ BASIC MODULE, ANALOG OUTPUT
115 (4.53)
17 (.66)
54 (2.13)
RJ-45 CONNECTOR
DIN RAIL
35mm wide
4
5
6
7
6
7
8
9
10
1
2
3
1
2
3
4
5
30 (1.18)
[5 (.20)]
65 (2.56)
6 (.24)
6 (.24)
7–M3 SCREW
TERMINALS
for POWER
10–M3 SCREW
TERMINALS
for OUTPUT
■ EXTENSION MODULE, 8 POINTS
11.5
(.45)
65 (2.56)
17 (.66)
54 (2.13)
DIN RAIL
35mm wide
6
7
8
9
10
1
2
3
4
5
30 (1.18)
[5 (.20)]
6 (.24)
10–M3 SCREW
TERMINALS for I/O
■ EXTENSION MODULE, 16 POINTS
17 (.66)
54 (2.13)
11.5
(.45)
94 (3.70)
DIN RAIL
35mm wide
10 11 12 13 14 15 16 17 18
1
2
3
4
5
6
7
8
9
30 (1.18)
[5 (.20)]
6 (.24)
18–M3 SCREW
TERMINALS for I/O
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 9/31
http://www.m-system.co.jp/
MODEL: R7E
DISCRETE INPUT MODULE, 16 points
MODEL: R7E-DA16
Input Circuit
6
7
3
24V DC
0V
1
2
COM
X0
X2
X4
X6
X8
XA
XC
XE
X1
X3
X5
X7
X9
XB
XD
XF
FG
3
Isolation
SPECIFICATIONS
Common: Positive or negative common (NPN/PNP) per
4
Modbus
/
RJ-45
CONNECTOR
TCP
5
16 points
4
1
5
2
Number of I/O: Input, 16 points
6
Maximum inputs applicable at once: No limit (at 24 V DC)
Input status indicator: LED turns ON with contact ON
Isolation: Input to Ethernet to FG to power input
Rated input voltage: 24 V DC ±10 %; ripple 5 %p-p max.
ON voltage / current: ≥ 15 V DC (input – COM) / ≥ 3.5 mA
OFF voltage / current: ≤ 5 V DC (input – COM) / ≤ 1 mA
Input current: ≤ 5.5 mA per point at 24 V DC
Input resistance: Approx. 4.4 kΩ
7
8
Control
Circuit
9
11
12
13
14
15
16
17
18
10
ON delay: ≤ 2.0 msec.
OFF delay: ≤ 2.0 msec.
OPERATING MODE SETTING
(*) Factory setting
Caution ! - SW1-3 through 1-8 are unused. Be sure to turn
off unused ones.
• Extension (SW1-1, 1-2)
SW1-1 SW1-2 Extension
■ Input Circuit
OFF
ON
OFF No extension (*)
OFF Discrete input, 8 or 16 points
1
2
OFF
ON
Discrete output, 8 or 16 points
COM
X0
TERMINAL ASSIGNMENTS
Control
Circuit
10
NC
11
X1
12
X3
13
X5
14
X7
15
X9
16
XB
17
XD
18
XF
1
2
3
4
5
6
7
8
9
COM
X0
X2
X4
X6
X8
XA
XC
XE
18
XF
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
6
7
8
9
COM Common
X0 Input 0
X2 Input 2
X4 Input 4
X6 Input 6
X8 Input 8
XA Input 10
XC Input 12
XE Input 14
10
11
12
13
14
15
16
17
18
NC No Connection
X1 Input 1
■ Input Connection Examples
X3 Input 3
PNP Connection
NPN Connection
X5 Input 5
X7 Input 7
+
–
– +
1
2
1
2
COM
X0
COM
X0
X9 Input 9
XB Input 11
XD Input 13
XF Input 15
18
18
XF
XF
CIRCUIT DIAGRAM
Note: In order to improve EMC performance, bond the FG
terminal to ground.
Caution: FG terminal is NOT a protective conductor
terminal.
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 10/31
http://www.m-system.co.jp/
MODEL: R7E
NPN TRANSISTOR OUTPUT MODULE, 16 points
CIRCUIT DIAGRAM
Note: In order to improve EMC performance, bond the FG
terminal to ground.
MODEL: R7E-DC16A
Caution: FG terminal is NOT a protective conductor
terminal.
SPECIFICATIONS
Common: Negative common (NPN) per 16 points
Output Circuit
6
7
3
24V DC
0V
10
2
+24V
Y0
Y2
Y4
Y6
Y8
YA
YC
YE
Y1
Y3
Y5
Y7
Y9
YB
YD
YF
0V
Number of I/O: Output, 16 points
Maximum outputs applicable at once: No limit (at 24 V DC)
Output status indicator: LED turns ON with contact ON
Isolation: Output to Ethernet to FG to power input
Rated load voltage: 24 V DC ±10 %
Rated output current: 0.25 A per point, 2.0 A per common
Residual voltage: ≤ 1.2 V
FG
3
Isolation
4
Modbus
/
RJ-45
CONNECTOR
TCP
5
4
1
5
2
6
7
Leakage current: ≤ 0.1 mA
ON delay: ≤ 0.5 msec.
8
Control
Circuit
OFF delay: ≤ 1.5 msec.
9
(When driving an inductive load, connect a diode in parallel
with the load.)
11
12
13
14
15
16
17
18
1
OPERATING MODE SETTING
(*) Factory setting
Caution ! - SW1-3, 1-5 through 1-8 are unused. Be sure to
turn off unused ones.
• Output at the Loss of Communication (SW1-4)
SW1-4 Output at the loss of communication
OFF Reset the output (turned off)
ON
Hold the output (*)
(maintains the last data received normally)
■ Output Circuit
• Extension (SW1-1, 1-2)
SW1-1 SW1-2 Extension
10
2
+24V
Y0
OFF
ON
OFF No extension (*)
OFF Discrete input, 8 or 16 points
ON Discrete output, 8 or 16 points
OFF
Control
Circuit
TERMINAL ASSIGNMENTS
18
YF
10
11
Y1
12
Y3
13
Y5
14
Y7
15
Y9
16
YB
17
YD
18
YF
+24V
1
2
3
4
5
6
7
8
9
0V
Y0
Y2
Y4
Y6
Y8
YA
YC
YE
1
0V
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
6
7
8
9
0 V 0 V (common)
Y0 Output 0
Y2 Output 2
Y4 Output 4
Y6 Output 6
Y8 Output 8
YA Output 10
YC Output 12
YE Output 14
10 +24 V 24 V DC
■ Output Connection Example
11
12
13
14
15
16
17
18
Y1 Output 1
Y3 Output 3
Y5 Output 5
Y7 Output 7
Y9 Output 9
YB Output 11
YD Output 13
YF Output 15
10
1
+24V
0V
–
+
2
Y0
18
YF
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 11/31
http://www.m-system.co.jp/
MODEL: R7E
PNP TRANSISTOR OUTPUT MODULE, 16 points
CIRCUIT DIAGRAM
Note: In order to improve EMC performance, bond the FG
terminal to ground.
MODEL: R7E-DC16B
Caution: FG terminal is NOT a protective conductor
terminal.
SPECIFICATIONS
Common: Positive common (PNP) per 16 points
Output Circuit
6
7
3
24V DC
0V
10
2
+24V
Y0
Y2
Y4
Y6
Y8
YA
YC
YE
Y1
Y3
Y5
Y7
Y9
YB
YD
YF
0V
Number of I/O: Output, 16 points
Maximum outputs applicable at once: No limit (at 24 V DC)
Output status indicator: LED turns ON with contact ON
Isolation: Output to Ethernet to FG to power input
Rated load voltage: 24 V DC ±10 %
Rated output current: 0.25 A per point, 2.0 A per common
Residual voltage: ≤ 1.2 V
FG
3
Isolation
4
Modbus
/
RJ-45
CONNECTOR
TCP
5
4
1
5
2
6
7
Leakage current: ≤ 0.1 mA
ON delay: ≤ 0.5 msec.
8
Control
Circuit
OFF delay: ≤ 1.5 msec.
9
(When driving an inductive load, connect a diode in parallel
with the load.)
11
12
13
14
15
16
17
18
1
OPERATING MODE SETTING
(*) Factory setting
Caution ! - SW1-3, 1-5 through 1-8 are unused. Be sure to
turn off unused ones.
• Output at the Loss of Communication (SW1-4)
SW1-4 Output at the loss of communication
OFF Reset the output (turned off)
ON
Hold the output (*)
(maintains the last data received normally)
■ Output Circuit
• Extension (SW1-1, 1-2)
SW1-1 SW1-2 Extension
10
2
+24V
Y0
OFF
ON
OFF No extension (*)
OFF Discrete input, 8 or 16 points
ON Discrete output, 8 or 16 points
OFF
Control
Circuit
TERMINAL ASSIGNMENTS
18
YF
0V
10
11
Y1
12
Y3
13
Y5
14
Y7
15
Y9
16
YB
17
YD
18
YF
+24V
1
2
3
4
5
6
7
8
9
0V
Y0
Y2
Y4
Y6
Y8
YA
YC
YE
1
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
6
7
8
9
0 V 0 V
10 +24 V 24 V DC (common)
■ Output Connection Example
Y0 Output 0
Y2 Output 2
Y4 Output 4
Y6 Output 6
Y8 Output 8
YA Output 10
YC Output 12
YE Output 14
11
12
13
14
15
16
17
18
Y1 Output 1
Y3 Output 3
Y5 Output 5
Y7 Output 7
Y9 Output 9
YB Output 11
YD Output 13
YF Output 15
+
–
10
1
+24V
0V
2
Y0
18
YF
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 12/31
http://www.m-system.co.jp/
MODEL: R7E
DC VOLTAGE/CURRENT INPUT MODULE, 4 points
TERMINAL ASSIGNMENTS
10
VL0
11
I0
12
VL1
13
I1
14
NC
15
VL2
16
I2
17
VL3
18
I3
MODEL: R7E-SV4
1
2
3
4
5
6
7
8
9
VH0 COM0 VH1 COM1
NC
VH2 COM2 VH3 COM3
SPECIFICATIONS
Isolation: Input 0 to input 1 to input 2 to input 3 to Ethernet
NO. ID
FUNCTION
VH0 Wide span volt. 0 10 VL0 Narrow span volt. 0
COM0 Common 0 11 I0 Current range 0
VH1 Wide span volt. 1 12 VL1 Narrow span volt. 1
NO. ID
FUNCTION
1
2
3
4
5
6
7
8
9
to FG to power input
Converted data range: 0 – 10000 of the input range
• Input range
COM1 Common 1
NC No connection
13
14
I1 Current range 1
NC No connection
Wide span voltage: -10 – +10 V DC, -5 – +5 V DC,
0 – 10 V DC, 0 – 5 V DC, 1 – 5 V DC
Narrow span voltage: -1 – +1 V DC, 0 – 1 V DC,
-0.5 – +0.5 V DC
VH2 Wide span volt. 2 15 VL2 Narrow span volt. 2
COM2 Common 2 16 I2 Current range 2
VH3 Wide span volt. 3 17 VL3 Narrow span volt. 3
COM3 Common 3 18 I3 Current range 3
Current range: -20 – +20 mA DC, 0 – 20 mA DC,
4 – 20 mA DC
• Input resistance
CIRCUIT DIAGRAM
Wide span voltage: ≥ 1 MΩ
Note: In order to improve EMC performance, bond the FG
Narrow span voltage: ≥ 100 kΩ
terminal to ground.
Current range: 70 Ω
Caution: FG terminal is NOT a protective conductor
terminal.
Conversion rate / conversion accuracy:
10 msec./±0.8 %, 20 msec./±0.4 %, 40 msec./±0.2 %,
80 msec./±0.1 %
Input Circuit
Input Circuit
Input Circuit
Input Circuit
INPUT 0
VH0
Response time: Conversion rate × 2 + 50 msec. (0 – 90 %)
Temperature coefficient: ±0.015 %/°C (±0.008 %/°F)
6
7
3
24V DC
0V
1
10
11
2
VL0
I0
FG
Isolation
OPERATING MODE SETTING
(*) Factory setting
COM0
Modbus
/
RJ-45
CONNECTOR
TCP
INPUT 1
VH1
3
12
13
4
4
1
5
2
• Input Range (SW1-5, 1-6, 1-7, 1-8)
VL1
I1
SW1-5 SW1-6 SW1-7 SW1-8 Input range
OFF
ON
OFF
OFF
ON
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
-10 – +10 V DC (*)
-5 – +5 V DC
Control
Circuit
COM1
OFF
ON
-1 – +1 V DC
INPUT 2
VH2
6
15
16
7
ON
0 – 10 V DC
VL2
I2
OFF
ON
OFF
OFF
ON
0 – 5 V DC
ON
1 – 5 V DC
OFF
ON
ON
0 – 1V DC
COM2
ON
ON
-0.5 – +0.5 V DC
-20 – +20 mA DC
4 – 20 mA DC
0 – 20 mA DC
PC Configurator setting
INPUT 3
VH3
ON
OFF
ON
OFF
OFF
OFF
ON
8
17
18
9
OFF
ON
ON
VL3
I3
ON
ON
ON
ON
ON
COM3
• Conversion Rate / Accuracy (SW1-3, 1-4)
5
SW1-3 SW1-4 Conversion rate / Accuracy
14
OFF
ON
OFF 80 msec. / 0.1ꢀ ꢁ*)
OFF 40 msec. / 0.ꢂꢀ
■ Input Connection Examples
OFF
ON
ON
ON
ꢂ0 msec. / 0.4ꢀ
10 msec. / 0.8ꢀ
+
VHn
VLn
In
VHn
VHn
• Extension (SW1-1, 1-2)
+
+
VLn
In
VLn
In
WIDE SPAN
VOLTAGE
SW1-1 SW1-2 Extension
NARROW SPAN
VOLTAGE
CURRENT
RANGE
OFF
ON
OFF No extension (*)
OFF Discrete input, 8 or 16 points
ON Discrete output, 8 or 16 points
–
COMn
–
COMn
–
COMn
OFF
Be sure to close across VLn and In terminals for a current input.
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 13/31
http://www.m-system.co.jp/
MODEL: R7E
THERMOCOUPLE INPUT MODULE, 4 points
MODEL: R7E-TS4
OPERATING MODE SETTING
(*) Factory setting
• Thermocouple Type (SW1-5, 1-6, 1-7, 1-8)
SW1-5 SW1-6 SW1-7 SW1-8 Thermocouple type
OFF
ON
OFF
OFF
ON
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
K (CA) (*)
E (CRC)
SPECIFICATIONS
Isolation: Input 0 to input 1 to input 2 to input 3 to Ethernet
OFF
ON
J (IC)
ON
T (CC)
to FG to power input
OFF
ON
OFF
OFF
ON
B (RH)
Converted data range: Engineering unit value (°C, K) × 10
(integer); No multiplication for °F
Linearization: Standard
ON
R
OFF
ON
ON
S
ON
ON
C (WRe 5-26)
Thermocouple: K, E, J, T, B, R, S, C, N, U, L, P, PR
Cold junction compensation: CJC sensor attached to the
input terminals
OFF
ON
OFF
OFF
ON
OFF
OFF
OFF
OFF
ON
N
ON
U
OFF
ON
ON
L
ON
ON
P (Platinel II)
(PR)
Input resistance: ≥ 30 kΩ
OFF
ON
OFF
ON
ON
Burnout sensing: ≤ 0.1 μA
ON
ON
PC Configurator setting
Conversion accuracy: ±1°C (±1.8°F);
±2.0°C (±3.6°F) for B, R, S, C, PR
Conversion rate: 250 msec. or 1 sec.
Response time: Conversion rate × 2 + 50 msec. (0 – 90 %)
Temperature coefficient: ±0.015 %/°C (±0.008 %/°F) of
max. span
• Conversion Rate (SW1-3)
SW1-3 Conversion rate
OFF 250 msec. (*)
ON
1 sec.
• Burnout (SW1-4)
SW1-4 Burnout
OFF Upscale (*)
CJC error: ±1.0°C at 25°C ±10°C
(±1.8°F at 77°F ±18°F)
ON
Downscale
±1.5°C (±2.7°F) for R, S, PR
• Extension (SW1-1, 1-2)
BURNOUT
T/C
CONFORMANCE
RANGE (°C)
SW1-1 SW1-2 Extension
INDICATION (°C)
OFF
ON
OFF No extension (*)
OFF Discrete input, 8 or 16 points
ON Discrete output, 8 or 16 points
Upscale
+1472
+1120
+1300
+ 500
1920
Downscale
-272
-272
-260
-272
24
K (CA)
-150 to +1370
-170 to +1000
-180 to +1200
-170 to + 400
1000 to 1760
380 to 1760
400 to 1760
100 to 2315
-130 to +1300
-200 to +600
-200 to +900
0 to 1395
OFF
E (CRC)
J (IC)
T (CC)
B (RH)
TERMINAL ASSIGNMENTS
R
-100
-100
-52
+1860
+1860
+2416
+1400
+ 700
+1000
+1496
+1860
S
10
11
12
13
14
NC
15
16
17
18
+IN0 –IN0 +IN1 –IN1
+IN2 –IN2 +IN3 –IN3
C (WRe 5-26)
1
2
3
4
5
6
7
8
9
N
-272
-252
-252
-52
+CJ0 –CJ0 +CJ1 –CJ1
NC
+CJ2 –CJ2 +CJ3 –CJ3
U
L
NO. ID
FUNCTION
+CJ0 CJC + 0
–CJ0 CJC – 0
NO. ID
FUNCTION
P (Platinel II)
(PR)
1
2
3
4
5
6
7
8
9
10 +IN0 T/C + 0
11 –IN0 T/C – 0
12 +IN1 T/C + 1
13 –IN1 T/C – 1
-52
300 to 1760
BURNOUT
INDICATION (°F)
CONFORMANCE
RANGE (°F)
T/C
+CJ1 CJC + 1
–CJ1 CJC – 1
NC No connection
+CJ2 CJC + 2
–CJ2 CJC – 2
+CJ3 CJC + 3
–CJ3 CJC – 3
Upscale
+2682
+2048
+2372
+932
Downscale
-458
-458
-436
-458
75
14
NC No connection
K (CA)
-238 to +2498
-274 to +1832
-292 to +2192
-274 to +752
1832 to 3200
716 to 3200
752 to 3200
212 to 4199
-202 to +2372
-328 to +1112
-328 to +1652
32 to 2543
15 +IN2 T/C + 2
16 –IN2 T/C – 2
17 +IN3 T/C + 3
18 –IN3 T/C – 3
E (CRC)
J (IC)
T (CC)
B (RH)
3488
R
-148
-148
-62
+3380
+3380
+4381
+2552
+1292
+1832
+2725
+3380
S
C (WRe 5-26)
N
-458
-422
-422
-62
U
L
P (Platinel II)
(PR)
-62
572 to 3200
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 14/31
http://www.m-system.co.jp/
MODEL: R7E
CIRCUIT DIAGRAM
Note: In order to improve EMC performance, bond the FG
terminal to ground.
Caution: FG terminal is NOT a protective conductor
terminal.
Input Circuit
Input Circuit
Input Circuit
Input Circuit
INPUT 0
+IN0
6
7
3
24V DC
0V
10
11
1
–IN0
+CJ0
–CJ0
FG
Isolation
2
Modbus
/
RJ-45
CONNECTOR
TCP
INPUT 1
+IN1
12
13
3
4
1
5
2
–IN1
+CJ1
–CJ1
Control
Circuit
4
INPUT 2
+IN2
15
16
6
–IN2
+CJ2
–CJ2
7
INPUT 3
+IN3
17
18
8
–IN3
+CJ3
–CJ3
9
5
14
■ Input Connection Example
T/C
+
–
+INn
–INn
+CJn
–CJn
CJC
SENSOR
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 15/31
http://www.m-system.co.jp/
MODEL: R7E
• Conversion Rate (SW1-3)
SW1-3 Conversion rate
OFF 250 msec. (*)
RTD INPUT MODULE, 4 points
MODEL: R7E-RS4
ON
1 sec.
• Burnout (SW1-4)
SW1-4 Burnout
OFF Upscale (*)
SPECIFICATIONS
Isolation: Input 0 to input 1 to input 2 to input 3 to Ethernet
ON
Downscale
to FG to power input
• Extension (SW1-1, 1-2)
Converted data range: Engineering unit value (°C, K) × 10
(integer); No multiplication for °F
SW1-1 SW1-2 Extension
OFF
ON
OFF No extension (*)
OFF Discrete input, 8 or 16 points
ON Discrete output, 8 or 16 points
Linearization: Standard
RTD: Pt 100 (JIS ’97, IEC), Pt 100 (JIS ’89), JPt 100 (JIS ’89),
Pt 50 Ω (JIS ’81), Ni 100, Cu 10, Cu 50
Sensing current: ≤ 1 mA
OFF
Input resistance: ≥ 1 MΩ
TERMINAL ASSIGNMENTS
Maximum leadwire resistance: 100 Ω per wire
Conversion accuracy: ±1°C (±1.8°F);
±3°C (±5.4°F) for Cu 10
10
11
12
13
14
NC
15
16
17
18
INA0 INb0 INA1 INb1
INA2 INb2 INA3 INb3
1
2
3
4
5
6
7
8
9
NC
INB0
NC
INB1
NC
NC
INB2
NC
INB3
Conversion rate: 250 msec. or 1 sec.
Response time: Conversion rate × 2 + 50 msec. (0 – 90 %)
Temperature coefficient: ±0.015 %/°C (±0.008 %/°F) of
max. span
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
6
7
8
9
NC No connection
INB0 RTD 0-B
10 INA0 RTD 0-A
11 INb0 RTD 0-b
12 INA1 RTD 1-A
13 INb1 RTD 1-b
BURNOUT INDICATION (°C) CONFORMANCE
NC No connection
INB1 RTD 1-B
RTD
Downscale
-240
-240
-236
-236
-100
Upscale
+900
+900
+560
+700
+252
+312
+200
RANGE (°C)
-200 to +850
-200 to +660
-200 to +510
-200 to +649
-80 to +250
-50 to +250
-50 to +150
Pt 100 (JIS ’97, IEC)
Pt 100 (JIS ’89)
JPt 100 (JIS ’89)
Pt 50 Ω (JIS ’81)
Ni 100
NC No connection
NC No connection
INB2 RTD 2-B
14
NC No connection
15 INA2 RTD 2-A
16 INb2 RTD 2-b
17 INA3 RTD 3-A
18 INb3 RTD 3-b
NC No connection
INB3 RTD 3-B
Cu 10 @ 25°C
Cu 50
-212
-100
BURNOUT INDICATION (°F) CONFORMANCE
RTD
Downscale
-400
-400
-393
-393
-148
Upscale
+1652
+1652
+1040
+1292
+486
RANGE (°F)
-328 to +1562
-328 to +1220
-328 to +950
-328 to +1200
-112 to +482
-58 to +482
Pt 100 (JIS ’97, IEC)
Pt 100 (JIS ’89)
JPt 100 (JIS ’89)
Pt 50 Ω (JIS ’81)
Ni 100
Cu 10 @ 25°C
Cu 50
-350
-148
+594
+392
-58 to +302
OPERATING MODE SETTING
(*) Factory setting
• RTD Type (SW1-5, 1-6, 1-7, 1-8)
SW1-5 SW1-6 SW1-7 SW1-8
RTD Type
OFF
ON
OFF
OFF
ON
OFF
OFF
OFF
OFF
ON
OFF Pt 100 (JIS ’97, IEC) (*)
OFF Pt 100 (JIS ’89)
OFF JPt 100 (JIS ’89)
OFF Pt 50 Ω (JIS ’81)
OFF Ni 100
OFF
ON
ON
OFF
ON
OFF
OFF
OFF
ON
ON
OFF Cu 10 @ 25°C
OFF
ON
OFF
ON
ON
ON
Cu 50
PC Configurator setting
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 16/31
http://www.m-system.co.jp/
MODEL: R7E
CIRCUIT DIAGRAM
Note: In order to improve EMC performance, bond the FG
terminal to ground.
Caution: FG terminal is NOT a protective conductor
terminal.
Input Circuit
Input Circuit
Input Circuit
Input Circuit
INPUT 0
INA0
6
7
3
24V DC
0V
10
2
INB0
INb0
FG
11
Isolation
INPUT 1
INA1
Modbus
TCP
/
RJ-45
CONNECTOR
12
4
INB1
INb1
4
1
5
2
13
Control
Circuit
INPUT 2
INA2
15
7
INB2
INb2
16
INPUT 3
INA3
17
9
INB3
INb3
18
1
3
5
6
8
14
■ Input Connection Example
RTD
INAn
INBn
INbn
A
B
B
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 17/31
http://www.m-system.co.jp/
MODEL: R7E
POTENTIOMETER INPUT MODULE, 4 points
MODEL: R7E-MS4
CIRCUIT DIAGRAM
Note: In order to improve EMC performance, bond the FG
terminal to ground.
Caution: FG terminal is NOT a protective conductor
terminal.
SPECIFICATIONS
Isolation: Input 0 to input 1 to input 2 to input 3 to Ethernet
Input Circuit
Input Circuit
Input Circuit
Input Circuit
INPUT 0
H0
6
7
3
24V DC
0V
10
11
2
Exc.
Exc.
Exc.
Exc.
to FG to power input
S0
L0
Converted data range: 0 – 10000 of the input range
Potentiometer: Total resistance 100 Ω – 20 kΩ
Minimum span: 50 % of total resistance
Excitation: Approx. 0.2 V DC
FG
Isolation
INPUT 1
H1
Modbus
/
RJ-45
CONNECTOR
12
13
4
TCP
S1
L1
4
1
5
2
Conversion rate / conversion accuracy:
10 msec./±0.8 %, 20 msec./±0.4 %, 40 msec./±0.2 %,
80 msec./±0.1 %
Control
Circuit
INPUT 2
H2
15
16
7
Response time: Conversion rate × 2 + 50 msec. (0 – 90 %)
Temperature coefficient: ±0.015 %/°C (±0.008 %/°F)
S2
L2
INPUT 3
H3
17
18
9
OPERATING MODE SETTING
(*) Factory setting
S3
L3
Caution ! - SW1-5, 1-6, 1-7, 1-8 are unused. Be sure to turn
off unused ones.
1
3
• Conversion Rate / Accuracy (SW1-3, 1-4)
5
SW1-3 SW1-4 Conversion rate / Accuracy
6
OFF
ON
OFF 80 msec. / 0.1ꢀ ꢁ*)
OFF 40 msec. / 0.ꢂꢀ
8
OFF
ON
ON
ON
ꢂ0 msec. / 0.4ꢀ
10 msec. / 0.8ꢀ
14
• Extension (SW1-1, 1-2)
■ Input Connection Example
SW1-1 SW1-2 Extension
POTENTIOMETER
max.
+
Hn
Sn
Ln
OFF
ON
OFF No extension (*)
OFF Discrete input, 8 or 16 points
ON Discrete output, 8 or 16 points
3
2
1
OFF
–
min.
TERMINAL ASSIGNMENTS
10
H0
11
S0
12
H1
13
S1
14
NC
15
H2
16
S2
17
H3
18
S3
1
2
3
4
5
6
7
8
9
NC
L0
NC
L1
NC
NC
L2
NC
L3
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
6
7
8
9
NC No connection
L0 Pot L0
10
11
12
13
14
15
16
17
18
H0 Pot H0
S0 Pot S0
H1 Pot H1
S1 Pot S1
NC No connection
H2 Pot H2
S2 Pot S2
H3 Pot H3
S3 Pot S3
NC No connection
L1 Pot L1
NC No connection
NC No connection
L2 Pot L2
NC No connection
L3 Pot L3
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 18/31
http://www.m-system.co.jp/
MODEL: R7E
• Extension (SW1-1, 1-2)
AC CURRENT INPUT MODULE, 4 points
(clamp-on current sensor CLSE use)
SW1-1 SW1-2 Extension
OFF
ON
OFF No extension (*)
OFF Discrete input, 8 or 16 points
ON Discrete output, 8 or 16 points
OFF
MODEL: R7E-CT4E
SPECIFICATIONS
Isolation: Input 0 to input 1 to input 2 to input 3 to Ethernet
TERMINAL ASSIGNMENTS
10
K0
11
L0
12
K1
13
L1
14
NC
15
K2
16
L2
17
K3
18
L3
to FG to power input
Converted data range:
1
2
3
4
5
6
7
8
9
NC
NC
NC
NC
NC
NC
NC
NC
NC
Engineering unit value (A) × 100 (Integer)
(Engineering unit value (A) × 1000 (Integer) for CLSE-R5)
Input range (Optional)
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
6
7
8
9
NC No connection
NC No connection
NC No connection
NC No connection
NC No connection
NC No connection
NC No connection
NC No connection
NC No connection
10
11
12
13
14
15
16
17
18
K0 AC current K0
L0 AC current L0
K1 AC current K1
L1 AC current L1
NC No connection
K2 AC current K2
L2 AC current L2
K3 AC current K3
L3 AC current L3
CLSE-R5: 0 – 5 A AC
CLSE-05: 0 – 50 A AC
CLSE-10: 0 – 100 A AC
CLSE-20: 0 – 200 A AC
CLSE-40: 0 – 400 A AC
CLSE-60: 0 – 600 A AC
Frequency: 50/60 Hz
Overload capacity: 120 % continuous
Operational range: 5 – 115 % of rating (Operational range
for the CLSE-60 is limited up to approx. 109 % (65535).)
(Note: Use for the circuit not exceed 480 V)
Conversion rate / conversion accuracy:
10 msec./±2.0 %, 20 msec./±1.0 %, 40 msec./±0.5 %,
80 msec./±0.5 %
(The conversion accuracy does not include the accuracy of
the sensor.)
Response time: ≤ 1.0 sec. (0 – 90 %)
Temperature coefficient: ±0.015 %/°C (±0.008 %/°F)
OPERATING MODE SETTING
(*) Factory setting
• Input Range (SW1-5, 1-6, 1-7, 1-8)
SW1-5 SW1-6 SW1-7 SW1-8 Input range
OFF
ON
OFF
OFF
ON
OFF
OFF
OFF
OFF
ON
OFF CLSE-60 (*)
OFF CLSE-40
OFF CLSE-20
OFF CLSE-10
OFF CLSE-05
OFF CLSE-R5
OFF
ON
ON
OFF
ON
OFF
OFF
ON
ON
ON
ON
ON
PC Configurator setting
• Conversion Rate / Accuracy (SW1-3, 1-4)
SW1-3 SW1-4 Conversion rate / Accuracy
OFF
ON
OFF 80 msec. / 0.ꢀ5 ꢁ*)
OFF 40 msec. / 0.ꢀ5
OFF
ON
ON
ON
20 msec. / 1.05
10 msec. / 2.05
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 19/31
http://www.m-system.co.jp/
MODEL: R7E
CIRCUIT DIAGRAM
Note: In order to improve EMC performance, bond the FG
terminal to ground.
Caution: FG terminal is NOT a protective conductor
terminal.
Input Circuit
Input Circuit
Input Circuit
Input Circuit
INPUT 0
K0
6
7
3
24V DC
0V
10
11
L0
INPUT 1
K1
FG
12
13
Isolation
Modbus
/
RJ-45
CONNECTOR
L1
TCP
INPUT 2
K2
4
1
5
2
15
16
L2
Control
Circuit
INPUT 3
K3
17
18
1
L3
2
3
4
5
6
7
8
9
14
Input Connection Example
SOURCE
k
Kn
Ln
CLAMP-ON SENSOR
l
LOAD
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 20/31
http://www.m-system.co.jp/
MODEL: R7E
TOTALIZED PULSE INPUT MODULE, 8 points
MODEL: R7E-PA8
TERMINAL ASSIGNMENTS
10
11
12
13
14
15
16
17
18
V+ PI0 PI1 PI2 PI3 PI4 PI5 PI6 PI7
1
2
3
4
5
6
7
8
9
V- C0
C1
C2
C3
C4
C5
C6
C7
SPECIFICATIONS
Common: Positive or negative common (NPN/PNP) per
NO.
ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
6
7
8
9
V –
C0
C1
C2
C3
C4
C5
C6
C7
Power (–)
Common
Common
Common
Common
Common
Common
Common
Common
10
11
12
13
14
15
16
17
18
V +
PI0
PI1
PI2
PI3
PI4
PI5
PI6
PI7
Power (+)
Input 0
Input 1
Input 2
Input 3
Input 4
Input 5
Input 6
Input 7
8 points
Number of I/O: Input, 8 points
Pulse Input status indicator: LED turns ON with contact ON
Isolation: Input to Ethernet to FG to power input
■ External excitation (PNP, NPN input)
Sensing voltage: 24 V DC ±10 %; ripple 5 %p-p max
ON voltage / ON current: ≥ 16 V DC (input terminal - Cx) /
≤ 3.7 mA
OFF voltage / OFF current: ≤ 5 V DC (input terminal - Cx) /
≤ 1 mA
Voltage pulse input
ON voltage / ON current: ≥ 16 V DC (input terminal - Cx) /
≤ 3.7 mA
OFF voltage / OFF current: ≤ 5 V DC (input terminal - Cx) /
≤ 1 mA
Input current: ≤ 5.5 mA per point at 24 V DC
Input resistance: Approx. 4.4 kΩ
ON delay: ≤ 2.0 msec.
OFF delay: ≤ 2.0 msec.
Max. Frequency: 100 Hz (This unit is designed to be able to
accept a frequency up to 100 Hz, however,‘chattering’
contact must be avoided for accurate measuring of such
high frequency. Use relays that do not cause any
chattering.)
Minimum ON/OFF pulse requirements: 5 ms
Accumulated pulse count: 0 - 4 294 967 295
Max. accumulated pulse count: 1 000 - 4 294 967 295
(Factory default: 9 999 999)
Overflow: 0 or 1 (Factory default: 0)
OPERATING MODE SETTING
(*) Factory setting
Caution ! - SW1-3 through 1-8 are unused. Be sure to turn
off unused ones.
• Extension (SW1-1, 1-2)
SW1-1 SW1-2 Extension
OFF
ON
OFF No extension (*)
OFF Discrete input, 8 or 16 points
OFF
ON
Discrete output, 8 or 16 points
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 21/31
http://www.m-system.co.jp/
MODEL: R7E
CIRCUIT DIAGRAM
Caution: FG terminal is NOT a protective conductor
terminal.
Input Circuit
6
7
3
10
1
V+
V–
24V DC
0V
11
12
13
14
15
16
17
18
2
PI0
PI1
PI2
PI3
PI4
PI5
PI6
PI7
C0
C1
C2
C3
C4
C5
C6
C7
FG
Isolation
Modbus
/
RJ-45
CONNECTOR
TCP
4
1
5
2
Control
Circuit
3
4
5
6
7
8
9
■ Input Circuit
10
1
V+
V–
11
2
PI0
C0
Control
Circuit
18
9
PI7
C7
■ Input Connection Examples
PNP connection
NPN connection
Voltage Pulse Input
+
−
−
+
10
1
10
1
10
1
V+
V–
V+
V–
V+
Connected
V–
11
2
11
2
11
2
PI0
C0
PI0
C0
+
–
PI0
C0
18
9
18
9
18
9
PI7
C7
PI7
C7
+
–
PI7
C7
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 22/31
http://www.m-system.co.jp/
MODEL: R7E
DC VOLTAGE OUTPUT MODULE, 2 points
MODEL: R7E-YV2
TERMINAL ASSIGNMENTS
6
7
8
9
10
VL1
NC
VH0
VL0
VH1
1
2
3
4
5
NC
COM0 COM0 COM1 COM1
SPECIFICATIONS
Isolation: Output 0 to output 1 to Ethernet to FG to power
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
NC No connection
COM0 Common 0
COM0 Common 0
COM1 Common 1
COM1 Common 1
6
7
8
9
NC No connection
input
VH0 Wide span volt. 0
VL0 Narrow span volt. 0
VH1 Wide span volt. 1
Converted data range: 0 – 10000 of the output range
Output range
10 VL1 Narrow span volt. 1
Wide span voltage: -10 – +10 V DC, -5 – +5 V DC,
0 – 10 V DC, 0 – 5 V DC, 1 – 5 V DC
Narrow span voltage: -1 – +1 V DC, 0 – 1 V DC,
-0.5 – +0.5 V DC
CIRCUIT DIAGRAM
Note: In order to improve EMC performance, bond the FG
Operational range: -15 – +115 % of the output range
(except -10 – +10 V DC);
terminal to ground.
Caution: FG terminal is NOT a protective conductor
terminal.
approx. -11.5 – +11.5 V DC (-10 – +10 V DC)
Load resistance: ≥ 100 kΩ
Conversion accuracy: ±0.1 %
Output Circuit
OUTPUT 0
VH0
Response time: 250 msec. (0 – 90 %)
Temperature coefficient: ±0.015 %/°C (±0.008 %/°F)
6
7
3
24V DC
0V
7
8
2
3
VL0
FG
COM0
COM0
Isolation
OPERATING MODE SETTING
(*) Factory setting
Modbus
/
RJ-45
CONNECTOR
TCP
Output Circuit
OUTPUT 1
VH1
9
10
4
Caution ! - SW1-3 is unused. Be sure to turn off unused
ones.
4
1
5
2
VL1
Control
Circuit
• Output Range (SW1-5, 1-6, 1-7, 1-8)
COM1
COM1
SW1-5 SW1-6 SW1-7 SW1-8 Output range
5
OFF
ON
OFF
OFF
ON
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
-10 – +10 V DC (*)
-5 – +5 V DC
1
OFF
ON
-1 – +1 V DC
6
ON
0 – 10 V DC
OFF
ON
OFF
OFF
ON
0 – 5 V DC
ON
1 – 5 V DC
OFF
ON
ON
0 – 1 V DC
ON
ON
-0.5 – +0.5 V DC
PC Configurator setting
ON
ON
ON
• Output at the Loss of Communication (SW1-4)
SW1-4 Output at the loss of communication
■ Output Connection Examples
OFF Reset the output (to -15% or approx. -11.5V DC)
+
–
VHn
VLn
VHn
ON
Hold the output (*)
WIDE SPAN
VOLTAGE
+
VLn
(maintains the last data received normally)
NARROW SPAN
VOLTAGE
COMn
COMn
–
• Extension (SW1-1, 1-2)
SW1-1 SW1-2 Extension
OFF
ON
OFF No extension (*)
OFF Discrete input, 8 or 16 points
ON Discrete output, 8 or 16 points
OFF
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 23/31
http://www.m-system.co.jp/
MODEL: R7E
DC CURRENT OUTPUT MODULE, 2 points
MODEL: R7E-YS2
CIRCUIT DIAGRAM
Note: In order to improve EMC performance, bond the FG
terminal to ground.
Caution: FG terminal is NOT a protective conductor
terminal.
SPECIFICATIONS
Isolation: Output 0 to output 1 to Ethernet to FG to power
Output Circuit
OUTPUT 0
I0
input
24V DC
0V
6
7
3
7
2
Converted data range: 0 – 10000 of the output range
Output range: 4 – 20 mA DC
COM0
Output Circuit
OUTPUT 1
I1
FG
Load resistance: ≤ 600Ω
Isolation
9
4
Modbus
/
RJ-45
CONNECTOR
Conversion accuracy: ±0.1 %
COM1
TCP
Response time: 250 msec. (0 – 90 %)
Temperature coefficient: ±0.015 %/°C (±0.008 %/°F)
1
4
1
5
2
3
Control
Circuit
5
OPERATING MODE SETTING
(*) Factory setting
6
8
Caution ! - SW1-3, 1-5 through 1-8 are unused. Be sure to
turn off unused ones.
10
• Output at the Loss of Communication (SW1-4)
SW1-4 Output at the loss of communication
OFF Reset the output (to -15%)
ON
Hold the output (*)
(maintains the last data received normally)
• Extension (SW1-1, 1-2)
SW1-1 SW1-2 Extension
OFF
ON
OFF No extension (*)
OFF Discrete input, 8 or 16 points
ON Discrete output, 8 or 16 points
OFF
TERMINAL ASSIGNMENTS
6
7
8
9
10
NC
NC
I0
NC
I1
1
2
3
4
5
NC
COM0
NC
COM1
NC
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
NC No connection
COM0 Common 0
NC No connection
COM1 Common 1
NC No connection
6
7
NC No connection
I0 Current 0
8
NC No connection
I1 Current 1
9
10
NC No connection
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 24/31
http://www.m-system.co.jp/
MODEL: R7E
DISCRETE INPUT EXTENSION MODULE, 8 points
CIRCUIT DIAGRAM
MODEL: R7E-EA8
Input Circuit
1
2
3
4
5
7
8
9
10
6
COM
X0
SPECIFICATIONS
Common: Positive or negative common (NPN/PNP) per
X2
8 points
X4
Number of I/O: Input, 8 points
X6
Control
Circuit
Maximum inputs applicable at once: No limit (at 24 V DC)
Input status indicator: LED turns ON with contact ON
Isolation: Input to internal circuits
X1
X3
Rated input voltage: 24 V DC ±10 %; ripple 5 %p-p max.
ON voltage / current: ≥ 15 V DC (input – COM) / ≥ 3.5 mA
OFF voltage / current: ≤ 5 V DC (input – COM) / ≤ 1 mA
Input current: ≤ 5.5 mA per point at 24 V DC
Input resistance: Approx. 4.4 kΩ
X5
X7
ON delay: ≤ 2.0 msec.
OFF delay: ≤ 2.0 msec.
■ Input Circuit
1
2
COM
X0
TERMINAL ASSIGNMENTS
6
7
8
9
10
X7
NC
X1
X3
X5
1
2
3
4
5
Control
Circuit
COM
X0
X2
X4
X6
NO. ID
FUNCTION
COM Common
X0 Input 0
NO. ID
FUNCTION
1
2
3
4
5
6
7
NC No Connection
X1 Input 1
10
X7
X2 Input 2
X4 Input 4
X6 Input 6
8
X3 Input 3
9
X5 Input 5
10
X7 Input 7
■ Input Connection Examples
PNP Connection
NPN Connection
+
–
– +
1
2
1
2
COM
X0
COM
X0
10
10
X7
X7
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 25/31
http://www.m-system.co.jp/
MODEL: R7E
DISCRETE INPUT EXTENSION MODULE, 16 points
CIRCUIT DIAGRAM
Input Circuit
MODEL: R7E-EA16
1
2
COM
X0
X2
X4
X6
X8
XA
XC
XE
X1
X3
X5
X7
X9
XB
XD
XF
SPECIFICATIONS
Common: Positive or negative common (NPN/PNP) per
3
4
16 points
5
Number of I/O: Input, 16 points
Maximum inputs applicable at once: No limit (at 24 V DC)
Input status indicator: LED turns ON with contact ON
Isolation: Input to internal circuits
6
7
8
Control
Circuit
Rated input voltage: 24 V DC ±10 %; ripple 5 %p-p max.
ON voltage / current: ≥ 15 V DC (input – COM) / ≥ 3.5 mA
OFF voltage / current: ≤ 5 V DC (input – COM) / ≤ 1 mA
Input current: ≤ 5.5 mA per point at 24 V DC
Input resistance: Approx. 4.4 kΩ
9
11
12
13
14
15
16
17
18
10
ON delay: ≤ 2.0 msec.
OFF delay: ≤ 2.0 msec.
TERMINAL ASSIGNMENTS
10
NC
11
X1
12
X3
13
X5
14
X7
15
X9
16
XB
17
XD
18
XF
1
2
3
4
5
6
7
8
9
COM
X0
X2
X4
X6
X8
XA
XC
XE
NO. ID
FUNCTION
NO. ID
FUNCTION
■ Input Circuit
1
2
3
4
5
6
7
8
9
COM Common
X0 Input 0
X2 Input 2
X4 Input 4
X6 Input 6
X8 Input 8
XA Input 10
XC Input 12
XE Input 14
10
11
12
13
14
15
16
17
18
NC No Connection
X1 Input 1
X3 Input 3
1
2
COM
X0
X5 Input 5
X7 Input 7
X9 Input 9
Control
Circuit
XB Input 11
XD Input 13
XF Input 15
18
XF
■ Input Connection Examples
PNP Connection
NPN Connection
+
–
– +
1
2
1
2
COM
X0
COM
X0
18
18
XF
XF
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 26/31
http://www.m-system.co.jp/
MODEL: R7E
NPN TRANSISTOR OUTPUT EXTENSION MODULE, 8 points
CIRCUIT DIAGRAM
Output Circuit
MODEL: R7E-EC8A
6
2
3
4
5
7
8
9
10
1
+24V
Y0
Y2
Y4
Y6
Y1
Y3
Y5
Y7
0V
SPECIFICATIONS
Common: Negative common (NPN) per 8 points
Number of I/O: Output, 8 points
Maximum outputs applicable at once: No limit (at 24 V DC)
Output status indicator: LED turns ON with contact ON
Isolation: Output to internal circuits
Rated load voltage: 24 V DC ±10 %
Rated output current: 0.25 A per point, 2.0 A per common
Residual voltage: ≤ 1.2 V
Control
Circuit
Leakage current: ≤ 0.1 mA
ON delay: ≤ 0.5 msec.
OFF delay: ≤ 1.5 msec.
(When driving an inductive load, connect a diode in parallel
with the load.)
■ Output Circuit
6
2
+24V
Y0
TERMINAL ASSIGNMENTS
6
7
8
9
10
Y7
+24 V
Y1
Y3
Y5
1
2
3
4
5
0 V
Y0
Y2
Y4
Y6
Control
Circuit
10
Y7
NO. ID
FUNCTION
NO. ID
FUNCTION
+24 V 24 V DC
Y1 Output 1
1
2
3
4
5
0 V 0 V (common)
Y0 Output 0
Y2 Output 2
Y4 Output 4
Y6 Output 6
6
7
8
Y3 Output 3
Y5 Output 5
Y7 Output 7
9
10
1
0V
■ Output Connection Example
6
1
2
+24V
0V
–
+
Y0
10
Y7
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 27/31
http://www.m-system.co.jp/
MODEL: R7E
NPN TRANSISTOR OUTPUT EXTENSION MODULE, 16 points
CIRCUIT DIAGRAM
Output Circuit
MODEL: R7E-EC16A
10
2
+24V
Y0
Y2
Y4
Y6
Y8
YA
YC
YE
Y1
Y3
Y5
Y7
Y9
YB
YD
YF
0V
SPECIFICATIONS
Common: Negative common (NPN) per 16 points
3
4
Number of I/O: Output, 16 points
5
Maximum outputs applicable at once: No limit (at 24 V DC)
Output status indicator: LED turns ON with contact ON
Isolation: Output to internal circuits
Rated load voltage: 24 V DC ±10 %
Rated output current: 0.25 A per point, 2.0 A per common
Residual voltage: ≤ 1.2 V
6
7
8
Control
Circuit
9
Leakage current: ≤ 0.1 mA
11
12
13
14
15
16
17
18
1
ON delay: ≤ 0.5 msec.
OFF delay: ≤ 1.5 msec.
(When driving an inductive load, connect a diode in parallel
with the load.)
TERMINAL ASSIGNMENTS
10
11
Y1
12
Y3
13
Y5
14
Y7
15
Y9
16
YB
17
YD
18
YF
+24V
1
2
3
4
5
6
7
8
9
0V
Y0
Y2
Y4
Y6
Y8
YA
YC
YE
NO. ID
FUNCTION
NO. ID
FUNCTION
■ Output Circuit
1
2
3
4
5
6
7
8
9
0 V 0 V (common)
Y0 Output 0
Y2 Output 2
Y4 Output 4
Y6 Output 6
Y8 Output 8
YA Output 10
YC Output 12
YE Output 14
10 +24 V 24 V DC
11
12
13
14
15
16
17
18
Y1 Output 1
Y3 Output 3
Y5 Output 5
Y7 Output 7
Y9 Output 9
YB Output 11
YD Output 13
YF Output 15
10
+24V
Y0
2
Control
Circuit
18
YF
1
0V
■ Output Connection Example
10
1
+24V
0V
–
+
2
Y0
18
YF
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 28/31
http://www.m-system.co.jp/
MODEL: R7E
PNP TRANSISTOR OUTPUT EXTENSION MODULE, 8 points
CIRCUIT DIAGRAM
Output Circuit
MODEL: R7E-EC8B
6
2
3
4
5
7
8
9
10
1
+24V
Y0
Y2
Y4
Y6
Y1
Y3
Y5
Y7
0V
SPECIFICATIONS
Common: Positive common (PNP) per 8 points
Number of I/O: Output, 8 points
Maximum outputs applicable at once: No limit (at 24 V DC)
Output status indicator: LED turns ON with contact ON
Isolation: Output to internal circuits
Rated load voltage: 24 V DC ±10 %
Rated output current: 0.25 A per point, 2.0 A per common
Residual voltage: ≤ 1.2 V
Control
Circuit
Leakage current: ≤ 0.1 mA
ON delay: ≤ 0.5 msec.
OFF delay: ≤ 1.5 msec.
(When driving an inductive load, connect a diode in parallel
with the load.)
■ Output Circuit
6
2
+24V
Y0
TERMINAL ASSIGNMENTS
6
7
8
9
10
Y7
+24 V
Y1
Y3
Y5
1
2
3
4
5
0 V
Y0
Y2
Y4
Y6
Control
Circuit
NO. ID
FUNCTION
NO. ID
FUNCTION
10
Y7
0V
1
2
3
4
5
0 V 0 V
6
7
+24 V 24 V DC (common)
Y1 Output 1
Y0 Output 0
Y2 Output 2
Y4 Output 4
Y6 Output 6
8
Y3 Output 3
9
Y5 Output 5
10
Y7 Output 7
1
■ Output Connection Example
+
–
6
1
2
+24V
0V
Y0
10
Y7
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 29/31
http://www.m-system.co.jp/
MODEL: R7E
PNP TRANSISTOR OUTPUT EXTENSION MODULE, 16 points
CIRCUIT DIAGRAM
Output Circuit
MODEL: R7E-EC16B
10
2
+24V
Y0
Y2
Y4
Y6
Y8
YA
YC
YE
Y1
Y3
Y5
Y7
Y9
YB
YD
YF
0V
SPECIFICATIONS
Common: Positive common (PNP) per 16 points
3
4
Number of I/O: Output, 16 points
Maximum outputs applicable at once: No limit (at 24 V DC)
Output status indicator: LED turns ON with contact ON
Isolation: Output to internal circuits
Rated load voltage: 24 V DC ±10 %
Rated output current: 0.25 A per point, 2.0 A per common
Residual voltage: ≤ 1.2 V
5
6
7
8
Control
Circuit
9
Leakage current: ≤ 0.1 mA
11
12
13
14
15
16
17
18
1
ON delay: ≤ 0.5 msec.
OFF delay: ≤ 1.5 msec.
(When driving an inductive load, connect a diode in parallel
with the load.)
TERMINAL ASSIGNMENTS
10
11
Y1
12
Y3
13
Y5
14
Y7
15
Y9
16
YB
17
YD
18
YF
+24V
1
2
3
4
5
6
7
8
9
0V
Y0
Y2
Y4
Y6
Y8
YA
YC
YE
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
6
7
8
9
0 V 0 V
10 +24 V 24 V DC (common)
■ Output Circuit
Y0 Output 0
Y2 Output 2
Y4 Output 4
Y6 Output 6
Y8 Output 8
YA Output 10
YC Output 12
YE Output 14
11
12
13
14
15
16
17
18
Y1 Output 1
Y3 Output 3
Y5 Output 5
Y7 Output 7
Y9 Output 9
YB Output 11
YD Output 13
YF Output 15
10
+24V
Y0
2
18
1
Control
Circuit
YF
0V
■ Output Connection Example
+
–
10
1
+24V
0V
2
Y0
18
YF
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 30/31
http://www.m-system.co.jp/
MODEL: R7E
Specifications are subject to change without notice.
R7E SPECIFICATIONS
ES-7807 Rev.13 Page 31/31
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明