R80NECT1 [MSYSTEM]
Remote I/O R80 Series POWER/NETWORK MODULE;型号: | R80NECT1 |
厂家: | M-SYSTEM |
描述: | Remote I/O R80 Series POWER/NETWORK MODULE |
文件: | 总4页 (文件大小:202K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: R80NECT1
/C02: Polyurethane coating
Remote I/O R80 Series
RELATED PRODUCTS
• PC configurator software (model: R80CFG)
POWER/NETWORK MODULE
(EtherCAT)
• ESI file
Functions & Features
The ESI file and configurator software are downloadable at
M-System’s web site.
• Free combination of analog and discrete I/O
• Space-saving
For connecting to PC, use commercially available Mini-B
type USB cable. (provided by user)
EtherCAT® is a registered trademark and patented
technology, licensed by Beckhoff Automation GmbH,
Germany.
PACKAGE INCLUDES...
• Protective cover
50 (1.97)
GENERAL SPECIFICATIONS
Connection
• Power input and excitation supply: Tension clamp terminal
block (Front Twin connection)
115 (4.53)
• EtherCAT: RJ-45 modular jack
• Internal bus, internal power and excitation supply: Via bus
connector
Max. number of I/O modules: 16
73 (2.87)
(mm)
(Max. consumption current of I/O modules: 1.6 A)
Isolation: Internal bus or internal power or power input to
excitation supply to EtherCAT or FE1
Status indicator LEDs: PWR, RUN, ERR, L/A IN, L/A OUT
(For details, refer to the operating manual.)
MODEL: R80NECT1–R[1]
ORDERING INFORMATION
• Code number: R80NECT1-R[1]
Specify a code from below for [1].
(e.g. R80NECT1-R/Q)
EtherCAT COMMUNICATION
Standard: IEEE 802.3u
Transmission type: 100BASE-TX
Transmission speed: Full-duplex 100 Mbps
Transmission media: 100BASE-TX (STP cable; Category 5e)
Maximum internode length: 100 meters
Fixed address: Set with rotary switches
(The master must support MDP.)
• Specify the specification for option code /Q
(e.g. /C01)
MODULE TYPE
NECT1: EtherCAT
INSTALLATION
Power consumption
POWER INPUT
DC power
•DC: Approx. 12 W 24 V DC (@ internal power max. current
1.6 A) )
R: 24 V DC
(Operational voltage range: ±10 %; ripple 10 %p-p max.)
Internal power supply (power supply for I/O module):
• DC power supply: 5 V DC
• Current capacity: 1.6 A
[1] OPTIONS
Excitation supply output (excitation for I/O module)
• DC: 24 V DC ±10 %
blank: none
/Q: With options (specify the specification)
• Operational current: 10 A
(From power and excitation supply connector, via
connector for internal bus, supplied to each I/O module.
Power output current consumption must be under
operational current.)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
R80NECT1 SPECIFICATIONS
ES-7022 Rev.2 Page 1/4
http://www.m-system.co.jp/
MODEL: R80NECT1
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: DIN rail
Weight: 210 g (0.46 lb)
PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(internal bus or internal power or power input to excitation
supply to EthrtCAT or FE1)
EXTERNAL VIEW
PWR
RUN
ERR
IN
PC Configurator Connector
Status Indicator LED
L/A
L/A
OUT
X16
Dev ID
X1
Fixed Address Setting Rotary SW
Internal Bus Connector
ECT
IN
EtherCAT Communication
RJ-45 Modular Jack
Connector for Power Supply and
Excitation Supply
ECT
OUT
WIRING
• POWER SUPPLY AND EXCITATION SUPPLY CONNECTOR
TERMINAL ASSIGNMENT
Unit side connector: MSTBV2,5/5-GF-5, 08AU (Phoenix
Contact)
Cable side connector: TFKC2,5/5-STF-5, 08AU (Phoenix
Contact)
Applicable wire size: 0.2 − 2.5 mm2; stripped length 10 mm
Recommended solderless terminal
• AI0,25−10YE 0.25 mm
• AI0,34−10TQ 0.34 mm
• AI0,5−10WH 0.5 mm
• AI0,75−10GY 0.75 mm
• AI1−10RD 1.0 mm (Phoenix Contact)
• AI1,5−10BK 1.5 mm
2
(Phoenix Contact)
2
(Phoenix Contact)
2
(Phoenix Contact)
(Phoenix Contact)
2
2
2
(Phoenix Contact)
(Phoenix Contact)
• AI2,5−10BU 2.5 mm
2
PIN
No.
ID
FUNCTION
1
2
3
4
5
Power supply 24 V DC
Power supply 0 V DC
24 V
0 V
+
1
2
3
Excitation supply 24 V DC
Excitation supply 0 V DC
4
–
5
FE1 Grounding
R80NECT1 SPECIFICATIONS
ES-7022 Rev.2 Page 2/4
http://www.m-system.co.jp/
MODEL: R80NECT1
EXTERNAL DIMENSIONS unit: mm (inch)
■UNIT
73 (2.87)
55 (2.17)
50 (1.97)
[4 (.16)]
[3 (.12)]
DIN RAIL
(35 mm wide)
■PROTECTIVE COVER
5 (.20)
50 (1.97)
R80NECT1 SPECIFICATIONS
ES-7022 Rev.2 Page 3/4
http://www.m-system.co.jp/
MODEL: R80NECT1
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
STATUS ROTARY
IND. LED SW
Isolation
Isolation
Comm.
Circuit
EtherCAT (IN)
RJ-45 MODULAR JACK
RJ-45 MODULAR JACK
INTERNAL BUS
Control
Circuit
EtherCAT (OUT)
PC CONFIGURATOR
CONNECTOR
USB CONNECTOR
+24 V
Power
Circuit
(No isolation)
INTERNAL POWER (5V)
EXC. SUPPLY (24V)
POWER
0 V
+
EXC. SUPPLY
–
FE1
Specifications are subject to change without notice.
R80NECT1 SPECIFICATIONS
ES-7022 Rev.2 Page 4/4
http://www.m-system.co.jp/
相关型号:
R8202016XX00
Rectifier Diode, 1 Phase, 1 Element, 1600A, 2000V V(RRM), Silicon, HERMETIC SEALED, CERAMIC PACKAGE-2
POWEREX
R8202216XX00
Rectifier Diode, 1 Phase, 1 Element, 1600A, 2200V V(RRM), Silicon, HERMETIC SEALED, CERAMIC PACKAGE-2
POWEREX
R8202416XX00
Rectifier Diode, 1 Phase, 1 Element, 1600A, 2400V V(RRM), Silicon, HERMETIC SEALED, CERAMIC PACKAGE-2
POWEREX
R8202616XX00
Rectifier Diode, 1 Phase, 1 Element, 1600A, 2600V V(RRM), Silicon, HERMETIC SEALED, CERAMIC PACKAGE-2
POWEREX
R8204407XX00
Rectifier Diode, 1 Phase, 1 Element, 1035A, 4400V V(RRM), Silicon, HERMETIC SEALED, CERAMIC PACKAGE-2
POWEREX
R8205007XX00
Rectifier Diode, 1 Phase, 1 Element, 1035A, 5000V V(RRM), Silicon, HERMETIC SEALED, CERAMIC PACKAGE-2
POWEREX
©2020 ICPDF网 联系我们和版权申明