SVFH-2WA-R [MSYSTEM]
Plug-in Signal Conditioners M-UNIT;
| 型号： | SVFH-2WA-R |
| 厂家： | 
M-SYSTEM |
| 描述： | Plug-in Signal Conditioners M-UNIT |
| 文件： | 总3页 (文件大小：97K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: SVFH
Plug-in Signal Conditioners M-UNIT
[2] OUTPUT
Current
A: 4 – 20 mA DC (Load resistance 750 Ω max.)
D: 0 – 20 mA DC (Load resistance 750 Ω max.)
Voltage
SIGNAL TRANSMITTER
(high dielectric strength)
Functions & Features
3: 0 – 1 V DC (Load resistance 1000 Ω min.)
4: 0 – 10 V DC (Load resistance 10 kΩ min.)
5: 0 – 5 V DC (Load resistance 5000 Ω min.)
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
4W: -10 – +10 V DC (Load resistance 10 kΩ min.)
5W: -5 – +5 V DC (Load resistance 5000 Ω min.)
7W: -7.5 – +7.5 V DC (Load resistance 7.5 kΩ min.)
• Up to 5 kV isolation between input to output or power
input
• Terminal cover
• PWB coating
72
(2.83)
POWER INPUT
DC Power
111
(4.37)
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
143
(5.63)
[3] OPTIONS
blank: none
mm (inch)
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
MODEL: SVFH–[1][2]–R[3]
ORDERING INFORMATION
• Code number: SVFH-[1][2]-R[3]
Specify a code from below for each of [1] through [3].
(e.g. SVFH-04W-R/Q)
/C02: Polyurethane coating
/C03: Rubber coating
GENERAL SPECIFICATIONS
Connection: M4 screw terminals (torque 1.2 N·m)
Screw terminal: Chrome-plated steel
• Input range (e.g. -600 – +600 V DC)
• Specify the specification for option code /Q
(e.g. /C01)
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
[1] INPUT
Voltage
Overrange input: -5 to +105 % (±2000V DC max.)
Zero adjustment: -0.2 to +0.2 % (front)
Span adjustment: 99.8 to 100.2 % (front)
2W: -100 – +100 mV DC (Input resistance 1 MΩ min.)
4W: -10 – +10 V DC (Input resistance 1 MΩ min.)
5W: -5 – +5 V DC (Input resistance 1 MΩ min.)
0: Specify range (Please specify from the following input range.)
• -20 - +20 mV DC
INPUT SPECIFICATIONS
■ DC Voltage
Input resistance: 1 MΩ min. (10 kΩ min. in power failure)
Overload input 1000% 3 min. (±2000V DC max.)
Overload input 300% 5 min. (±2000V DC max.)
• -40 - +40 mV DC
• -200 - +200 mV DC
• -250 - +250 V DC
• -500 - +500 V DC
• -600 - +600 V DC
INSTALLATION
Power consumption
• -700 - +700 V DC
• -1000 - +1000 V DC
•DC: ≤ 3 W
• -1250 - +1250 V DC
Operating temperature: -10 to +60°C (14 to 140°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
• -1300 - +1300 V DC
• -1500 - +1500 V DC
• -2000 - +2000 V DC (CE not available)
SVFH SPECIFICATIONS
ES-1324 Rev.2 Page 1/3
http://www.m-system.co.jp/
MODEL: SVFH
Weight: 450 g (0.99 lb)
PERFORMANCE in percentage of span
Accuracy: ±0.1 %
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: ≤ 4 msec. (0 – 90 %)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 5000 V AC @ 1 minute (input to output
or power or ground)
2000 V AC @ 1 minute (output to power to ground)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
Low Voltage Directive
EN 61010-1
Measurement Category I (input)
Pollution degree 2
Input to output or power: Reinforced insulation (1500 V)
Note: Input range higher than 1500 V DC is exempted from
low voltage directive.
RoHS Directive
EN 50581
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
10 (.39)
14–M4 SCREW
2–M4 MTG HOLE
TERMINAL COVER
DIN RAIL
35mm wide
1
2
3
4
5
6
7
8
9
10
11 12 13 14 15 16
54 (2.13)
72 (2.83)
8 (.31)
[4 (.16)]
3
(.12)
143 (5.63)
• When mounting, no extra space is needed between units.
SVFH SPECIFICATIONS
ES-1324 Rev.2 Page 2/3
http://www.m-system.co.jp/
MODEL: SVFH
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Z
S
Isolation
Output
Driver
Amplifier
+
−
+
−
+
−
1
4
5
6
2
3
7
8
9
INPUT
OUTPUT
POWER
10
15
16
11
12
13
14
Specifications are subject to change without notice.
SVFH SPECIFICATIONS
ES-1324 Rev.2 Page 3/3
http://www.m-system.co.jp/
相关型号：
SVFH-2WA-R/Q
Plug-in Signal Conditioners M-UNITWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
SVFH-2WD-R
Plug-in Signal Conditioners M-UNITWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
SVFH-2WD-R/Q
Plug-in Signal Conditioners M-UNITWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
SVFH-4W3-R
Plug-in Signal Conditioners M-UNITWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
SVFH-4W3-R/Q
Plug-in Signal Conditioners M-UNITWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
SVFH-4W4-R
Plug-in Signal Conditioners M-UNITWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
SVFH-4W4-R/Q
Plug-in Signal Conditioners M-UNITWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
SVFH-4W4W-R
Plug-in Signal Conditioners M-UNITWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
SVFH-4W4W-R/Q
Plug-in Signal Conditioners M-UNITWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
SVFH-4W5-R
Plug-in Signal Conditioners M-UNITWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
SVFH-4W5-R/Q
Plug-in Signal Conditioners M-UNITWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
SVFH-4W5W-R
Plug-in Signal Conditioners M-UNITWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
©2020 ICPDF网 联系我们和版权申明