W2AP-435-R2/UL
更新时间:2024-10-29 22:40:14
品牌:MSYSTEM
描述:Space-saving Dual Output Signal Conditioners Mini-MW Series
W2AP-435-R2/UL 概述
Space-saving Dual Output Signal Conditioners Mini-MW Series
W2AP-435-R2/UL 数据手册
通过下载W2AP-435-R2/UL数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载MODEL: W2AP
Space-saving Dual Output Signal Conditioners
[2] OUTPUT 1
1: Open collector (max. frequency 10 kHz)
(When the dry contact AC/DC switch is selected as
one of the outputs, the frequency of the other output
is limited to max. 30 Hz.)
Mini-MW Series
DC/FREQUENCY CONVERTER
Functions & Features
2: 5 V pulse (max. frequency 10 kHz)
• Provides a pulse rate output in proportion to DC input
signal
(When the dry contact AC/DC switch is selected as
one of the outputs, the frequency of the other output
is limited to max. 30 Hz.)
Typical Applications
3: Dry contact AC/DC switch (max. frequency 30 Hz)
• Totalizing applications in combination with a counter
[3] OUTPUT 2
Same range availability as Output 1
Y: None
29.5 (1.16)
Model
88.5
(3.48)
[4] POWER INPUT
AC Power
M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,
47 – 66 Hz)
ZERO
SPAN
124
(4.88)
(90 – 264 V for UL)
mm (inch)
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
R2: 11 – 27 V DC
MODEL: W2AP–[1][2][3]-[4][5]
(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)
(Select ‘/N’ for ‘Standards & Approvals’ code.)
P: 110 V DC
ORDERING INFORMATION
• Code number: W2AP-[1][2][3]-[4][5]
Specify a code from below for each of [1] through [5].
(e.g. W2AP-612-M2/CE/Q)
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)
(Select ‘/N’ for ‘Standards & Approvals’ code.)
• Special input range (For codes Z & 0)
• Output frequency range (e.g. 0 – 500 Hz)
Frequencies of Output 1 and 2 are the same.
• Specify the specification for option code /Q
(e.g. /C01/S01)
[5] OPTIONS (multiple selections)
Standards & Approvals (must be specified)
/N: Without CE or UL
/CE: CE marking
/UL: UL approval, CE marking
Other Options
[1] INPUT
blank: none
Current
/Q: Option other than the above (specify the specification)
A: 4 – 20 mA DC (Input resistance 250 Ω)
D: 0 – 20 mA DC (Input resistance 50 Ω)
G: 0 – 1 mA DC (Input resistance 1000 Ω)
H: 10 – 50 mA DC (Input resistance 100 Ω)
Z: Specify current (See INPUT SPECIFICATIONS)
( 0 % input must be 0 mA.)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating (UL not available)
TERMINAL SCREW MATERIAL
Voltage
3: 0 – 1 V DC (Input resistance 1 MΩ min.)
4: 0 – 10 V DC (Input resistance 1 MΩ min.)
5: 0 – 5 V DC (Input resistance 1 MΩ min.)
6: 1 – 5 V DC (Input resistance 1 MΩ min.)
0: Specify voltage (See INPUT SPECIFICATIONS)
( 0 % input must be 0 V.)
/S01: Stainless steel (UL not available)
W2AP SPECIFICATIONS
ES-5535 Rev.13 Page 1/4
http://www.m-system.co.jp/
MODEL: W2AP
GENERAL SPECIFICATIONS
Construction: Plug-in
OUTPUT PULSE WIDTH
■ Frequency less than 500 Hz at 100% input
→ See the figure below.
Connection: M3 screw terminals (torque 0.8 N·m)
Screw terminal: Chromated steel (standard) or stainless
steel
• Open Collector
• Voltage Pulse
OFF
H Level
Housing material: Flame-resistant resin (black)
Isolation: Input to output 1 to output 2 to power
Zero adjustment: 0 – 5 % (front)
ON
20
L Level
%
20%
80
%
80%
1 / f
1 / f
Span adjustment: 95 to 105 % (front)
■ Frequency greater than 500 Hz at 100% input
→ See the figure and equation below.
INPUT SPECIFICATIONS
■ DC Current:
• Open Collector
• Voltage Pulse
OFF
H Level
Shunt resistor attached to the input terminals (0.5 W)
Specify input resistance value for code Z.
■ DC Voltage: 0 – 300V DC
ON
L Level
Pulse Width
Pulse Width
Minimum span: 1V
Input resistance: 1 MΩ min.
1
Pulse Width [millisec.] =
2.09 × 100% Frequency [kHz]
OUTPUT SPECIFICATIONS
• Open Collector: 30 V DC @100 mA (resistive load)
Frequency range: 0 – 10 pulses/hour through 10 kHz
Saturation voltage: 0.6 V DC
■ When the dry contact AC/DC Switch is selected
as either OUTPUT 1 or OUTPUT 2
→ See the figure below. ON or L pulse width is
limited within 75 25 msec. when the output
frequency gets low (below 2 to 4 Hz).
■ 5 V Pulse
• Open Collector
• Voltage Pulse
Frequency range: 0 – 10 pulses/hour through 10 kHz
Hi level: 3.0 – 5.5 V
Dry Contact AC/DC Switch
OFF
H Level
L Level
Lo level: ≤ 0.5 V
ON
Load resistance: 250 Ω min.
20
%
20%
80%
80%
■ Dry Contact AC/DC Switch
1 / f
1 / f
Frequency range: 0 – 10 pulses/hour through 30 Hz
Timer: Limits within 75 ±25 msec.
for wider than 75 msec. pulses
INSTALLATION
Power Consumption
•AC:
Rated load: 132 V AC @200 mA (cos ø = 1)
30 V DC @200 mA (resistive load)
Saturation voltage: 3 V DC
Approx. 4 VA at 100 V
Approx. 5 VA at 200 V
Approx. 6 VA at 240 V
•DC: Approx. 3 W
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Weight: 200 g (0.44 lb)
PERFORMANCE in percentage of span
Accuracy: ±0.1 %
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: Approx. 3 sec. (0 – 90 %)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input to output
1 to output 2 to power to ground)
W2AP SPECIFICATIONS
ES-5535 Rev.13 Page 2/4
http://www.m-system.co.jp/
MODEL: W2AP
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
Low Voltage Directive
EN 61010-1
Measurement Category II (input, output)
Installation Category II (power)
Pollution Degree 2
Input or output 1 or output 2 to power input:
Reinforced insulation (300 V)
Input to output 1 to output 2: Basic insulation (300 V)
RoHS Directive
EN 50581
Approval:
UL/C-UL nonincendive Class I, Division 2,
Groups A, B, C, and D
(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)
UL/C-UL general safety requirements
(UL 61010-1, CAN/CSA-C22.2 No.61010-1)
EXTERNAL DIMENSIONS unit: mm (inch)
6 (.23)
DIN RAIL
35mm wide
3
2
5
1
4
6
2–4.2x5
(.17x.20)
MTG HOLE
6 (.24) deep
9
8
7
11–M3
SCREW
11 10
22 (.87)
29.5 (1.16)
21.5 (.87) 10 (.39)
84 (3.31)
114 (4.49)
[4 (.16)]
• When mounting, no extra space is needed between units.
W2AP SPECIFICATIONS
ES-5535 Rev.13 Page 3/4
http://www.m-system.co.jp/
MODEL: W2AP
TERMINAL ASSIGNMENTS unit: mm (inch)
INPUT RESISTOR
(model: REM2)
3
2
5
1
4
6
9
8
7
11 10
Input shunt resistor attached
for current input.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Z
S
Isolation
**
Timer
Low Drift
Amplifier
Volt. / Freq.
Converter
Output
Driver
+
–
1
2
4
5
9
7
8
+
–
Divider
*
INPUT
R
OUTPUT 1
OUTPUT 2
Output
Driver
3
6
+
–
10
11
U(+)
V(–)
POWER
Base Socket
*
Input shunt resistor attached for current input.
** Provided only when the dry contact AC/DC switch is selected as one of the outputs.
Note: The section enclosed by broken line is only with 2nd output option.
Output Connection Examples
Open Collector
Dry Contact AC/DC Switch
• AC Powered
Relay or
Counter Coil
7
8
+
–
+
–
7
Varistor or Spark
Quenching Circuit
LOAD
8
U
Voltage Pulse
• DC Powered
Relay or
Counter Coil
7
8
+
–
+
–
7
Spark Quenching Diode
LOAD
8
Specifications are subject to change without notice.
W2AP SPECIFICATIONS
ES-5535 Rev.13 Page 4/4
http://www.m-system.co.jp/
W2AP-435-R2/UL 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
W2AP-43A-M2 | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 | |
W2AP-43A-M2/CE | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 | |
W2AP-43A-M2/N | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 | |
W2AP-43A-M2/Q | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 | |
W2AP-43A-M2/UL | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 | |
W2AP-43A-P | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 | |
W2AP-43A-P/CE | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 | |
W2AP-43A-P/N | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 | |
W2AP-43A-P/Q | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 | |
W2AP-43A-P/UL | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 |
W2AP-435-R2/UL 相关文章
- 2024-10-31
- 6
- 2024-10-31
- 6
- 2024-10-31
- 7
- 2024-10-31
- 8