W2MST-C6-R/N [MSYSTEM]

Space-saving Dual Output Signal Conditioners Mini-MW Series;


型号：	W2MST-C6-R/N
厂家：	M-SYSTEM
描述：	Space-saving Dual Output Signal Conditioners Mini-MW Series
文件：	总3页 (文件大小：113K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: W2MST

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

Space-saving Dual Output Signal Conditioners

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

4W: -10 – +10 V DC (Load resistance 10 kΩ min.)

5W: -5 – +5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

Mini-MW Series

2-OUTPUT PARAMETER GENERATOR

Functions & Features

• Provides a constant DC signal

• Setpoint adjustable from -10.0 to +105 %

• Easy setting with the front digital display

[2] OUTPUT 2

Y: None

Typical Applications

• Various parameter settings for computers and

DCS’s

Current

A: 4 – 20 mA DC (Load resistance 350 Ω max.)

Voltage

29.5 (1.16)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

[3] POWER INPUT

MODEL

AC Power

88.5

(3.48)

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

DOWN

47 – 66 Hz)

DC Power

124

(4.88)

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

R2: 11 – 27 V DC

mm (inch)

(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)

P: 110 V DC

MODEL: W2MST–[1][2]–[3][4]

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

ORDERING INFORMATION

• Code number: W2MST-[1][2]-[3][4]

Specify a code from below for each of [1] through [4].

(e.g. W2MST-AA-M2/N/Q)

[4] OPTIONS (multiple selections)

Standards & Approvals (must be specified)

/N: Without CE

Other Options

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

blank: none

/Q: Option other than the above (specify the specification)

Note: When the user requires a current and a voltage

output, specify the current to be the Output 1 which allows

a greater load.

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

[1] OUTPUT 1

Current

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Output 1 to output 2 to power

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

W2MST SPECIFICATIONS

ES-5517 Rev.1 Page 1/3

http://www.m-system.co.jp/

MODEL: W2MST

Overrange output: Approx. -10 to +105 % (within 0 to 20

mA DC, -10 to +12 V DC)

EXTERNAL VIEW

Zero adjustment: -5 to +5 % (front)

(A) Polarity Indicator LED

(B) Setpoint Display

MODEL

RED

(+)

GREEN

Span adjustment: 95 to 105 % (front)

(-)

Adjustable individually for each output 1 and output 2.

Setpoint adjustment: -10.0 – +105 %;

DOWN

Top: ON

Bottom: OFF

0.1 % increments (1 % increments over 100 %)

Display selector: Double-throw SW (front)

UP/DOWN control: Double-throw, momentary SW (front)

■ INDICATORS

ZERO

OUT1

SPAN

(D) UP/DOWN Control

ZERO

OUT2

SPAN

Setpoint display: Red LED; 6.4 mm (.25”) 7 segment, 3

digits

(E) Zero Adj.

Output 1

(F) Span Adj.

Polarity indicator: Dual color (red/green) LED; Red with a

positive set value; Green with a negative set value.

Power saving mode: Indicators turn off when the switches

are left untouched for 1 minute, or when the display

selector is set to the bottom position.

(G) Zero Adj.

Output 2

(H) Span Adj.

• How to Set an Output

Turn the Display Selector (C) to the top position.

The Setpoint Display (B) shows the current setpoint (-10.0 –

+105 %). Press UP/DOWN Control (D) until the display

shows a desired set value.

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

The Polarity Indicator LED (A) is red when the set value is in

positive range, green when in negative range.

Load resistance: Output drive 15 V max.

■ DC Voltage: -10 – +12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 1 mA max.; at ≥ 0.5 V

INSTALLATION

Power Consumption

•AC:

Approx. 4 VA at 100 V

Approx. 5 VA at 200 V

Approx. 6 VA at 264 V

•DC: Approx. 3 W

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 150 g (0.33 lb)

PERFORMANCE in percentage of span

Setting accuracy: ±0.1 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (output 1 to

output 2 to power to ground)

W2MST SPECIFICATIONS

ES-5517 Rev.1 Page 2/3

http://www.m-system.co.jp/

MODEL: W2MST

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

6 (.23)

DIN RAIL

35mm wide

2–4.2x5

(.17x.20)

MTG HOLE

6 (.24) deep

11–M3

SCREW

11 10

22 (.87)

29.5 (1.16)

21.5 (.87) 10 (.39)

84 (3.31)

114 (4.49)

[4 (.16)]

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

DISPLAY

SELECTOR

UP/DOWN

CONTROL

Isolation

Digital

Computation

Output

Driver

–

OUTPUT 1

Setpoint

Display

Output

Driver

OUTPUT 2

POWER

–

U(+)

V(–)

Base Socket

Note: The section enclosed by broken line is only with 2nd output option.

Specifications are subject to change without notice.

W2MST SPECIFICATIONS

ES-5517 Rev.1 Page 3/3

http://www.m-system.co.jp/