W2PP-31YR-R2 [MSYSTEM]
Space-saving Dual Output Signal Conditioners Mini-MW Series;
| 型号： | W2PP-31YR-R2 |
| 厂家： | 
M-SYSTEM |
| 描述： | Space-saving Dual Output Signal Conditioners Mini-MW Series |
| 文件： | 总4页 (文件大小：121K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: W2PP
(When the low frequency open collector or the dry
Space-saving Dual Output Signal Conditioners
contact AC/DC switch is selected as one of the outputs,
the frequency of the other output is limited to max. 30 Hz.)
4: 12 V pulse (max. frequency 10 kHz)
Mini-MW Series
PULSE ISOLATOR
Functions & Features
(When the low frequency open collector or the dry
contact AC/DC switch is selected as one of the outputs,
the frequency of the other output is limited to max. 30 Hz.)
5: 24 V pulse (max. frequency 10 kHz)
• Galvanically isolates pulse rate signals
• Input frequency = output frequency
• Various outputs (open collector, voltage pulses and dry
contact AC/DC switch)
(When the low frequency open collector or the dry
contact AC/DC switch is selected as one of the outputs,
the frequency of the other output is limited to max. 30 Hz.)
6: Dry contact AC/DC switch (max. frequency 30 Hz)
• High-density mounting
Typical Applications
• Isolating field pulse signals in order to reduce noises
• Changing e.g. dry contact signal to e.g. 5 V signals
[3] OUTPUT 2
Same range availability as Output 1
Y: None
29.5 (1.16)
[4] OUTPUT LOGIC
N: The same as the input
R: Inverted
Model
88.5
(3.48)
[5] POWER INPUT
AC Power
124
(4.88)
M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,
mm (inch)
47 – 66 Hz)
DC Power
R: 24 V DC
MODEL: W2PP–[1][2][3][4]-[5][6]
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
R2: 11 – 27 V DC
ORDERING INFORMATION
• Code number: W2PP-[1][2][3][4]-[5][6]
Specify a code from below for each of [1] through [6].
(e.g. W2PP-333N-M2/CE/Q)
(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)
(Select ‘/N’ for ‘Standards & Approvals’ code.)
P: 110 V DC
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)
• Specify the specification for option code /Q
(e.g. /C01/S01)
[6] OPTIONS (multiple selections)
Standards & Approvals (must be specified)
/N: Without CE
[1] INPUT
/CE: CE marking
1: Mechanical contact (max. 30 Hz)
2: Open collector (max. 10 kHz)
3: Voltage pulse (max. 10 kHz)
9: Clamp-on pulse sensor CLSP
Other Options
blank: none
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
[2] OUTPUT 1
1: Low frequency open collector (max. 30 Hz)
2: High frequency open collector (max. 10 kHz)
(When the low frequency open collector or the dry
contact AC/DC switch is selected as one of the outputs,
the frequency of the other output is limited to max. 30 Hz.)
3: 5 V pulse (max. frequency 10 kHz)
/C02: Polyurethane coating
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
W2PP SPECIFICATIONS
ES-5534 Rev.12 Page 1/4
http://www.m-system.co.jp/
MODEL: W2PP
AC/DC switch is selected as one of the outputs, the timer is
applied also to the other output.)
Saturation voltage: 0.5 V DC
RELATED PRODUCTS
• Clamp-on pulse sensor (model: CLSP)
■ High Frequency Open Collector:
50 V DC @100 mA (resistive load)
Maximum frequency: 10 kHz
GENERAL SPECIFICATIONS
Construction: Plug-in
Connection: M3 screw terminals (torque 0.8 N·m)
Screw terminal: Chromated steel (standard) or stainless
steel
Saturation voltage: 0.5 V DC
■ Voltage Pulse
Maximum frequency: 10 kHz
Housing material: Flame-resistant resin (black)
Isolation: Input to output 1 to output 2 to power
Frequency range: Input and output are the same.
Chattering protection: Filter provided for mechanical
contact input
High level: Rating (5, 12 or 24 V) ±10 %
Low level: ≤ 0.5V
Load resistance:
≥ 250 Ω for 5 V
≥ 600 Ω for 12 V
Input pulse sensing: DC coupled
≥ 1200 Ω for 24 V, output 1
≥ 2400 Ω for 24 V, output 2
■ Dry Contact AC/DC Switch
INPUT SPECIFICATIONS
Excitation: 12 V DC @30 mA; shortcircuit protection
■ Open Collector
132 V AC @200 mA (cos ø = 1)
30 V DC @200 mA (resistive load)
Maximum frequency: 30 Hz
Maximum frequency: 10 kHz
Timer: Limits within 75 ±25 msec.
for wider than 75 msec. pulses
ON time for output logic non-inverted
OFF time for output logic inverted
(When the low frequency open collector or the dry contact
AC/DC switch is selected as one of the outputs, the timer is
applied also to the other output.)
Saturation voltage: 3 V DC
Pulse width time requirement: 10 μsec. min. for ON and OFF
Sensing: Approx. 12 V DC @3 mA
ON/OFF level: ≤ 600 Ω / 1.8 V for ON, ≥ 100 kΩ / 3.5 V for
OFF
■ Mechanical Contact
Maximum frequency: 30 Hz
Pulse width time requirement: 10 msec. min. for ON and
OFF
Sensing: Approx. 12 V DC @3 mA
ON/OFF level: ≤ 200 Ω / 0.6 V for ON, ≥ 100 kΩ / 2.5 V for
OFF
INSTALLATION
Power Consumption
■ Voltage Pulse
•AC:
Maximum frequency: 10 kHz
Approx. 4 VA at 100 V
Pulse width time requirement: 10 μsec. min. for high and
low levels
Approx. 5 VA at 200 V
Approx. 6 VA at 240 V
Waveforms: Square or sine
•DC: Approx. 4 W
Hi/Lo level: 2 – 50 V for high level; ≤1 V for low level
Input impedance: 10 kΩ min.
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Weight: 200 g (0.44 lb)
■ Clamp-on Pulse Sensor CLSP
Maximum frequency: 50 000 pulses/hour
ON/OFF level: ≤ 400 Ω / 1.3 V for ON, ≥ 200 kΩ / 12 V for
OFF
PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input to output
1 to output 2 to power to ground)
OUTPUT SPECIFICATIONS
■ Low Frequency Open Collector:
50 V DC @100 mA (resistive load)
Maximum frequency: 30 Hz
STANDARDS & APPROVALS
EU conformity:
Timer: Limits within 75 ±25 msec.
for wider than 75 msec. pulses
EMC Directive
ON time for output logic non-inverted
OFF time for output logic inverted
(When the low frequency open collector or the dry contact
EMI EN 61000-6-4
EMS EN 61000-6-2
W2PP SPECIFICATIONS
ES-5534 Rev.12 Page 2/4
http://www.m-system.co.jp/
MODEL: W2PP
Low Voltage Directive
EN 61010-1
Measurement Category II (output)
Installation Category II (power)
Pollution Degree 2
Input or output 1 or output 2 to power input:
Reinforced insulation (300 V)
Input to output 1 to output 2: Basic insulation (300 V)
RoHS Directive
EN 50581
OUTPUT LOGIC
VOLTAGE PULSE
OUTPUT
OPEN COLLECTOR
DRY CONTACT AC/DC SW OUT
INPUT TYPE
PULSE LOGIC
Non Inverted
INPUT PULSE
H
H
OFF
L
L
ON
Voltage Pulse
H
H
OFF
Inverted
Non Inverted
Inverted
L
L
ON
OFF
H
OFF
Mechanical Contact
Open Collector
ON
L
ON
Clamp-on Pulse
Sensor CLSP
OFF
H
OFF
ON
L
ON
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
6 (.23)
DIN RAIL
35mm wide
3
2
5
1
4
6
2–
4.2x5
(.17x.20)
MTG HOLE
6 (.24) deep
9
8
7
11–M3
SCREW
11 10
22 (.87)
29.5 (1.16)
21.5 (.87) 10 (.39)
84 (3.31)
114 (4.49)
[4 (.16)]
• When mounting, no extra space is needed between units.
W2PP SPECIFICATIONS
ES-5534 Rev.12 Page 3/4
http://www.m-system.co.jp/
MODEL: W2PP
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Isolation
*
Waveform
Shaper
Output
Driver
+
–
1
2
4
5
9
7
8
+
–
Timer
INPUT
OUTPUT 1
SENSOR EXCITATION
+
12V Supply
Output
Driver
3
6
+
OUTPUT 2
POWER
–
10
11
U(+)
V(–)
Base Socket
*The timer is provided when the low frequency open collector or the dry contact
AC/DC switch is selected as one of the outputs.
Note: The section enclosed by broken line is only with 2nd output option.
Input Connection Examples
Output Connection Examples
■ Mechanical Contact, Open Collector
or Clamp-on Pulse Sensor CLSP
■ Open Collector
■ Dry Contact AC/DC Switch
• AC Powered
Relay or
Counter Coil
+
–
–
+
+
–
+
1
2
4
+
–
+
–
7
8
7
Varistor or Spark
Quenching Circuit
LOAD
8
+12V
PWR
U
4kΩ
■ Voltage Pulse
• DC Powered
Relay or
Counter Coil
■ Voltage Pulse
7
8
+
–
+
–
7
8
Spark Quenching Diode
+
–
–
+
+
–
+
1
2
4
LOAD
+12V
PWR
Specifications are subject to change without notice.
W2PP SPECIFICATIONS
ES-5534 Rev.12 Page 4/4
http://www.m-system.co.jp/
相关型号：
W2PP-31YR-R2/CE
Space-saving Dual Output Signal Conditioners Mini-MW SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
W2PP-31YR-R2/N
Space-saving Dual Output Signal Conditioners Mini-MW SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
W2PP-31YR-R2/Q
Space-saving Dual Output Signal Conditioners Mini-MW SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
W2PP-321N-M2
Space-saving Dual Output Signal Conditioners Mini-MW SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
W2PP-321N-M2/CE
Space-saving Dual Output Signal Conditioners Mini-MW SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
W2PP-321N-M2/N
Space-saving Dual Output Signal Conditioners Mini-MW SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
W2PP-321N-M2/Q
Space-saving Dual Output Signal Conditioners Mini-MW SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
W2PP-321N-P
Space-saving Dual Output Signal Conditioners Mini-MW SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
W2PP-321N-P/CE
Space-saving Dual Output Signal Conditioners Mini-MW SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
W2PP-321N-P/N
Space-saving Dual Output Signal Conditioners Mini-MW SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
W2PP-321N-P/Q
Space-saving Dual Output Signal Conditioners Mini-MW SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
W2PP-321N-R
Space-saving Dual Output Signal Conditioners Mini-MW SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
©2020 ICPDF网 联系我们和版权申明