首页 |元器件品牌 | PCB在线计价/下单
首页 > W2PV-C12A-P/UL

W2PV-C12A-P/UL

更新时间：2024-10-29 22:33:59
品牌：MSYSTEM
描述：Space-saving Dual Output Signal Conditioners

PDF下载

中文翻译

PCB计价

W2PV-C12A-P/UL 概述

Space-saving Dual Output Signal Conditioners

W2PV-C12A-P/UL 数据手册

通过下载W2PV-C12A-P/UL数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
MODEL: W2PV  
Space-saving Dual Output Signal Conditioners  
[2] OUTPUT 1  
Current  
Mini-MW Series  
A: 4 – 20 mA DC (Load resistance 750 Ω max.)  
B: 2 – 10 mA DC (Load resistance 1500 Ω max.)  
C: 1 – 5 mA DC (Load resistance 3000 Ω max.)  
D: 0 – 20 mA DC (Load resistance 750 Ω max.)  
E: 0 – 16 mA DC (Load resistance 900 Ω max.)  
F: 0 – 10 mA DC (Load resistance 1500 Ω max.)  
G: 0 – 1 mA DC (Load resistance 15 kΩ max.)  
Z: Specify current (See OUTPUT SPECIFICATIONS)  
Voltage  
P/I TRANSDUCER  
Functions & Features  
• Converts a standard pneumatic signal into a  
proportional DC output  
Typical Applications  
• Converting a pneumatic system into a 4 – 20 mA for  
indicating and controlling in DCS system  
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)  
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)  
3: 0 – 1 V DC (Load resistance 1000 Ω min.)  
4: 0 – 10 V DC (Load resistance 10 kΩ min.)  
5: 0 – 5 V DC (Load resistance 5000 Ω min.)  
6: 1 – 5 V DC (Load resistance 5000 Ω min.)  
0: Specify voltage (See OUTPUT SPECIFICATIONS)  
29.5 (1.16)  
Model  
88.5  
(3.48)  
ZERO  
SPAN  
[3] OUTPUT 2  
Y: None  
126  
(4.96)  
ZERO  
SPAN  
Current  
mm (inch)  
A: 4 – 20 mA DC (Load resistance 350 Ω max.)  
B: 2 – 10 mA DC (Load resistance 700 Ω max.)  
C: 1 – 5 mA DC (Load resistance 1400 Ω max.)  
D: 0 – 20 mA DC (Load resistance 350 Ω max.)  
E: 0 – 16 mA DC(Load resistance 430 Ω max.)  
F: 0 – 10 mA DC (Load resistance 700 Ω max.)  
G: 0 – 1 mA DC (Load resistance 7000 Ω max.)  
Z: Specify current (See OUTPUT SPECIFICATIONS)  
Voltage  
MODEL: W2PV–C[1][2][3]-[4][5]  
ORDERING INFORMATION  
• Code number: W2PV-C[1][2][3]-[4][5]  
Specify a code from below for each [1] through [5].  
(e.g. W2PV-C2SAA-M2/CE/Q)  
Same range availability as Output 1  
• Special output range (For codes Z & 0)  
• Specify the specification for option code /Q  
(e.g. /C01/S01)  
[4] POWER INPUT  
AC Power  
Note: If one of the outputs should be a current range,  
specify it for the Output 1 to allow a greater load.  
M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,  
47 – 66 Hz)  
(90 – 264 V for UL)  
PNEUMATIC CONNECTION  
C: 6 mm dia. (.24”)  
DC Power  
R: 24 V DC  
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)  
R2: 11 – 27 V DC  
[1] INPUT  
1S: 19.6 – 98.1 kPa  
2S: 20 – 100 kPa  
3S: 20.7 – 103.4 kPa  
(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)  
(Select ‘/N’ for ‘Standards & Approvals’ code.)  
P: 110 V DC  
1: 0.2 – 1.0 kgf/cm  
2: 0.2 – 1.0 bar  
3: 3 – 15 psig  
2
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)  
(110 V ±10 % for UL)  
W2PV SPECIFICATIONS  
ES-5544 Rev.13 Page 1/3  
http://www.m-system.co.jp/  
MODEL: W2PV  
[5] OPTIONS (multiple selections)  
Standards & Approvals (must be specified)  
/N: Without CE or UL  
INSTALLATION  
Power Consumption  
•AC:  
/CE: CE marking  
Approx. 4 VA at 100 V  
Approx. 5 VA at 200 V  
Approx. 6 VA at 240 V  
•DC: Approx. 3 W  
/UL: UL approval, CE marking  
Other Options  
blank: none  
/Q: Option other than the above (specify the specification)  
Operating temperature: -5 to +55°C (23 to 131°F)  
Operating humidity: 30 to 90 %RH (non-condensing)  
Mounting: Surface or DIN rail  
SPECIFICATIONS OF OPTION: Q (multiple selections)  
COATING (For the detail, refer to M-System's web site.)  
/C01: Silicone coating  
Weight: 200 g (0.44 lb)  
/C02: Polyurethane coating  
PERFORMANCE in percentage of span  
Accuracy: ±0.3 %  
/C03: Rubber coating (UL not available)  
TERMINAL SCREW MATERIAL  
Temp. coefficient: ±0.03 %/°C (±0.02 %/°F)  
Response time: ≤ 0.5 sec. (0 – 90 %)  
/S01: Stainless steel (UL not available)  
Permissible overrange: 196 kPa (2.0 kgf/cm2, 1.96 bar, 28  
psig)  
GENERAL SPECIFICATIONS  
Construction: Plug-in  
Line voltage effect: ±0.1 % over voltage range  
Insulation resistance: ≥ 100 MΩ with 500 V DC  
Dielectric strength: 2000 V AC @1 minute (output 1 to  
output 2 to power to ground)  
Connection  
Output & power input: M3 screw terminals (torque 0.8  
N·m)  
Pneumatic: 6 mm dia (.24”) tube  
Screw terminal: Chromated steel (standard) or stainless  
steel  
STANDARDS & APPROVALS  
EU conformity:  
Housing material: Flame-resistant resin (black)  
Isolation: Output 1 to output 2 to power  
Overrange output: Approx. -10 to +120 % at 1 – 5 V  
Zero adjustment: -5 to +5 % (front)  
Span adjustment: 95 to 105 % (front)  
Adjustable individually for each output 1 and output 2.  
EMC Directive  
EMI EN 61000-6-4  
EMS EN 61000-6-2  
Low Voltage Directive  
EN 61010-1  
Installation Category II  
Pollution Degree 2  
output 1 or output 2 to power input:  
Reinforced insulation (300 V)  
output 1 to output 2: Basic insulation (300 V)  
RoHS Directive  
INPUT SPECIFICATIONS  
■ Input  
19.6 – 98.1 kPa, 0.2 – 1.0 kgf/cm  
2
20 – 100 kPa, 0.2 – 1.0 bar  
EN 50581  
20.7 – 103.4 kPa, 3 – 15 psig  
Approval:  
UL/C-UL nonincendive Class I, Division 2,  
Groups A, B, C, and D  
OUTPUT SPECIFICATIONS  
■ DC Current: 0 – 20 mA DC  
(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)  
UL/C-UL general safety requirements  
(UL 61010-1, CAN/CSA-C22.2 No.61010-1)  
Minimum span: 1 mA  
Offset: Max. 1.5 times span  
Load resistance: Output drive 15 V max. for Output 1;  
7 V max. for Output 2  
■ DC Voltage: 0 – 12 V DC (up to 10 V for Output 2)  
Minimum span: 5 mV  
Offset: ≤ 1.5 times span  
Load resistance: Output drive 1 mA max.; at ≥0.5 V  
W2PV SPECIFICATIONS  
ES-5544 Rev.13 Page 2/3  
http://www.m-system.co.jp/  
MODEL: W2PV  
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)  
PNEUMATIC COUPLER  
(tube size 6 [.24] dia.)  
6 (.23)  
DIN RAIL  
35mm wide  
3
2
5
1
4
6
2–4.2x5  
(.17x.20)  
MTG HOLE  
6 (.24) deep  
9
8
7
11–M3  
SCREW  
11 10  
22 (.87)  
29.5 (1.16)  
21.5 (.87) 12 (.47)  
84 (3.31)  
114 (4.49)  
[4 (.16)]  
• When mounting, no extra space is needed between units.  
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM  
Z
S
Semiconductor  
Pressure Sensor  
Low Drift  
Amplifier  
Output  
Driver  
7
8
+
–
INPUT  
OUTPUT 1  
Z
S
Isolation  
Output  
Driver  
CONSTANT  
CURRENT  
3
6
+
OUTPUT 2  
POWER  
–
10  
11  
U(+)  
V(–)  
Base Socket  
Note: The section enclosed by broken line is only with 2nd output option.  
Specifications are subject to change without notice.  
W2PV SPECIFICATIONS  
ES-5544 Rev.13 Page 3/3  
http://www.m-system.co.jp/  

W2PV-C12A-P/UL 相关器件

型号 制造商 描述 价格 文档
W2PV-C12A-R MSYSTEM Space-saving Dual Output Signal Conditioners 获取价格
W2PV-C12A-R/CE MSYSTEM Space-saving Dual Output Signal Conditioners 获取价格
W2PV-C12A-R/Q MSYSTEM Space-saving Dual Output Signal Conditioners 获取价格
W2PV-C12A-R/UL MSYSTEM Space-saving Dual Output Signal Conditioners 获取价格
W2PV-C12A-R2 MSYSTEM Space-saving Dual Output Signal Conditioners 获取价格
W2PV-C12A-R2/CE MSYSTEM Space-saving Dual Output Signal Conditioners 获取价格
W2PV-C12A-R2/Q MSYSTEM Space-saving Dual Output Signal Conditioners 获取价格
W2PV-C12A-R2/UL MSYSTEM Space-saving Dual Output Signal Conditioners 获取价格
W2PV-C12B-M2 MSYSTEM Space-saving Dual Output Signal Conditioners 获取价格
W2PV-C12B-M2/CE MSYSTEM Space-saving Dual Output Signal Conditioners 获取价格

W2PV-C12A-P/UL 相关文章

  • HARTING(浩亭)圆形连接器产品选型手册
    2024-10-31
    6
  • HYCON(宏康科技)产品选型手册
    2024-10-31
    6
  • GREEGOO整流二极管和晶闸管产品选型手册
    2024-10-31
    7
  • 西门子豪掷106亿美元，战略收购工程软件巨头Altair
    2024-10-31
    8

    • 热门型号

  • LM358
  • UPC8158
  • XC6105A618
  • 2N5087/D28Z
  • TMM-136-06-S-S-SM-23-P
  • NC7WZ16P6X
  • SDR10KSM
  • STC53K33N07
  • ERG3SG242
  • M2XRP2-J1Z1-R
  • TMM-139-01-G-S-SM
  • 54F20
  • TMP513
  • SZ6A11
  • PEL12S
  • 概述
  • 数据手册
    • 2024 ICPDF网 联系我们和版权申明:QQ 272164286