W2TG0-1BY-M2/CE
更新时间:2024-10-29 22:24:38
品牌:MSYSTEM
描述:Space-saving Dual Output Signal Conditioners Mini-MW Series
W2TG0-1BY-M2/CE 概述
Space-saving Dual Output Signal Conditioners Mini-MW Series
W2TG0-1BY-M2/CE 数据手册
通过下载W2TG0-1BY-M2/CE数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载MODEL: W2TG
Space-saving Dual Output Signal Conditioners
[1] INPUT
Voltage
Mini-MW Series
1: 0 – 35 V AC (Input resistance 100 kΩ min.)
2: 0 – 50 mV AC (Input resistance 100 kΩ min.)
3: 0 – 60 mV AC (Input resistance 100 kΩ min.)
4: 0 – 100 mV AC (Input resistance 100 kΩ min.)
5: 0 – 1 V AC (Input resistance 100 kΩ min.)
6: 0 – 10 V AC (Input resistance 100 kΩ min.)
7: 0 – 100 V AC (Input resistance 100 kΩ min.)
8: 0 – 110 V AC (Input resistance 100 kΩ min.)
9: 0 – 150 V AC (Input resistance 100 kΩ min.)
A: 0 – 200 V AC (Input resistance 100 kΩ min.)
B: 0 – 250 V AC (Input resistance 100 kΩ min.)
U: Specify voltage (See INPUT SPECIFICATIONS)
(0 % input must be 0 V.)
TACHOGENERATOR TRANSMITTER
Functions & Features
• Converts an AC voltage from a tachogenerator
(tachometer) into a standard process signal
• Wide input range
• Two independent output ranges
Typical Applications
• Measuring rotating or moving speed of multispeed
motors, belt conveyers, metering pumps
29.5 (1.16)
[2] OUTPUT 1
Current
Model
A: 4 – 20 mA DC (Load resistance 750 Ω max.)
B: 2 – 10 mA DC (Load resistance 1500 Ω max.)
C: 1 – 5 mA DC (Load resistance 3000 Ω max.)
D: 0 – 20 mA DC (Load resistance 750 Ω max.)
E: 0 – 16 mA DC (Load resistance 900 Ω max.)
F: 0 – 10 mA DC (Load resistance 1500 Ω max.)
G: 0 – 1 mA DC (Load resistance 15 kΩ max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
88.5
(3.49)
ZERO
SPAN
124
(4.88)
ZERO
SPAN
mm (inch)
MODEL: W2TG–[1][2][3]-[4][5]
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)
3: 0 – 1 V DC (Load resistance 1000 Ω min.)
4: 0 – 10 V DC (Load resistance 10 kΩ min.)
5: 0 – 5 V DC (Load resistance 5000 Ω min.)
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
4W: -10 – +10 V DC (Load resistance 10 kΩ min.)
5W: -5 – +5 V DC (Load resistance 5000 Ω min.)
0: Specify voltage (See OUTPUT SPECIFICATIONS)
ORDERING INFORMATION
• Code number: W2TG-[1][2][3]-[4][5]
Specify a code from below for each of [1] through [5].
(e.g. W2TG-UAA-M2/CE/Q)
• Special input and output ranges (For codes U, Z & 0)
• Specify the specification for option code /Q
(e.g. /C01/S01)
Note: When the user requires a current and a voltage
output, specify the current to be the Output 1 which allows
a greater load.
[3] OUTPUT 2
Y: None
Current
A: 4 – 20 mA DC (Load resistance 350 Ω max.)
B: 2 – 10 mA DC (Load resistance 700 Ω max.)
C: 1 – 5 mA DC (Load resistance 1400 Ω max.)
D: 0 – 20 mA DC (Load resistance 350 Ω max.)
E: 0 – 16 mA DC(Load resistance 430 Ω max.)
F: 0 – 10 mA DC (Load resistance 700 Ω max.)
G: 0 – 1 mA DC (Load resistance 7000 Ω max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
Same range availability as Output 1
W2TG SPECIFICATIONS
ES-5539 Rev.13 Page 1/4
http://www.m-system.co.jp/
MODEL: W2TG
[4] POWER INPUT
OUTPUT SPECIFICATIONS
AC Power
■ DC Current: 0 – 20 mA DC
M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,
Minimum span: 1 mA
47 – 66 Hz)
Offset: Max. 1.5 times span
(90 – 264 V for UL)
Load resistance: Output drive 15 V max. for Output 1;
7 V max. for Output 2
DC Power
R: 24 V DC
■ DC Voltage: -10 – +12 V DC (up to 10 V for Output 2)
Minimum span: 5 mV
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
R2: 11 – 27 V DC
Offset: Max. 1.5 times span
(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)
(Select ‘/N’ for ‘Standards & Approvals’ code.)
P: 110 V DC
Load resistance: Output drive 1 mA max.; at ≥ 0.5 V
INSTALLATION
Power Consumption
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)
(110 V ±10 % for UL)
•AC:
Approx. 4 VA at 100 V
[5] OPTIONS (multiple selections)
Standards & Approvals (must be specified)
/N: Without CE or UL
Approx. 5 VA at 200 V
Approx. 6 VA at 240 V
•DC: Approx. 3 W
/CE: CE marking
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Weight: 200 g (0.44 lb)
/UL: UL approval, CE marking
Other Options
blank: none
/Q: Option other than the above (specify the specification)
PERFORMANCE in percentage of span
Accuracy: ±0.4 %
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
Temp. coefficient: ±0.05 %/°C (±0.03 %/°F)
Response time: ≤ 0.7 sec. (0 – 90 %)
/C02: Polyurethane coating
Ripple: 0.5 %p-p max. (100/120 Hz)
/C03: Rubber coating (UL not available)
TERMINAL SCREW MATERIAL
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input to output
1 to output 2 to power to ground)
/S01: Stainless steel (UL not available)
GENERAL SPECIFICATIONS
Construction: Plug-in
Connection: M3 screw terminals (torque 0.8 N·m)
Screw terminal: Chromated steel (standard) or stainless
steel
Housing material: Flame-resistant resin (black)
Isolation: Input to output 1 to output 2 to power
Overrange output: 0 to 120 % at 1 – 5 V
Zero adjustment: -5 to +5 % (front)
Span adjustment: 95 to 105 % (front)
Adjustable individually for each output 1 and output 2.
INPUT SPECIFICATIONS
•AC Voltage: 0 – 250 V AC
Minimum span: 50 mV
Frequency: 15 Hz min., 1 kHz max. with 100 % input
Input resistance: ≥ 100 kΩ
W2TG SPECIFICATIONS
ES-5539 Rev.13 Page 2/4
http://www.m-system.co.jp/
MODEL: W2TG
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
Low Voltage Directive
EN 61010-1
Measurement Category II (input)
Installation Category II (power)
Pollution Degree 2
Input or output 1 or output 2 to power input:
Reinforced insulation (300 V)
Input to output 1 to output 2: Basic insulation (300 V)
RoHS Directive
EN 50581
Approval:
UL/C-UL nonincendive Class I, Division 2,
Groups A, B, C, and D
(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)
UL/C-UL general safety requirements
(UL 61010-1, CAN/CSA-C22.2 No.61010-1)
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
6 (.23)
DIN RAIL
35mm wide
3
2
5
1
4
6
2–
4.2x5
(.17x.20)
MTG HOLE
6 (.24) deep
9
8
7
11–M3
SCREW
11 10
22 (.87)
29.5 (1.16)
21.5 (.87) 10 (.39)
84 (3.31)
114 (4.49)
[4 (.16)]
• When mounting, no extra space is needed between units.
W2TG SPECIFICATIONS
ES-5539 Rev.13 Page 3/4
http://www.m-system.co.jp/
MODEL: W2TG
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Z
S
Isolation
AC
Amplifier
R.M.S.
Operation
Output
Driver
+
–
1
2
4
5
9
7
8
INPUT
OUTPUT 1
Z
S
Output
Driver
+
–
3
6
OUTPUT 2
POWER
10 U(+)
11 V(–)
Base Socket
Note: The section enclosed by broken line is only with 2nd output option.
Specifications are subject to change without notice.
W2TG SPECIFICATIONS
ES-5539 Rev.13 Page 4/4
http://www.m-system.co.jp/
W2TG0-1BY-M2/CE 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
W2TG0-1BY-M2/N | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 | |
W2TG0-1BY-M2/Q | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 | |
W2TG0-1BY-M2/UL | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 | |
W2TG0-1BY-P | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 | |
W2TG0-1BY-P/CE | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 | |
W2TG0-1BY-P/N | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 | |
W2TG0-1BY-P/UL | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 | |
W2TG0-1BY-R | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 | |
W2TG0-1BY-R/CE | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 | |
W2TG0-1BY-R/N | MSYSTEM | Space-saving Dual Output Signal Conditioners Mini-MW Series | 获取价格 |
W2TG0-1BY-M2/CE 相关文章
- 2024-10-31
- 6
- 2024-10-31
- 6
- 2024-10-31
- 7
- 2024-10-31
- 8