W2VABS-3W11-R [MSYSTEM]

Space-saving Dual Output Signal Conditioners Mini-MW Series;


型号：	W2VABS-3W11-R
厂家：	M-SYSTEM
描述：	Space-saving Dual Output Signal Conditioners Mini-MW Series
文件：	总4页 (文件大小：115K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: W2VABS

16W: -60 – 0 – +60 mV DC (Input resistance 10 kΩ min.)

2W: -100 – 0 – +100 mV DC (Input resistance 100 kΩ min.)

3W: -1 – 0 – +1 V DC (Input resistance 1 MΩ min.)

4W: -10 – 0 – +10 V DC (Input resistance 1 MΩ min.)

5W: -5 – 0 – +5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

Space-saving Dual Output Signal Conditioners

Mini-MW Series

ABSOLUTE VALUE OUTPUT TRANSMITTER

Functions & Features

• Converts polarized DC input into standard process signals

proportional to absolute value of input.

• Two independent output ranges

[2] OUTPUT 1

Current

• Fast response type available

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

Typical Applications

• Monitor rotation speed of a machine rotating forward and

reverse

• Monitor a deviation between SV and PV

29.5 (1.16)

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

Model

88.5

(3.49)

ZERO

SPAN

124

(4.88)

ZERO

SPAN

mm (inch)

[3] OUTPUT 2

Y: None

MODEL: W2VABS–[1][2][3]-[4][5]

Current

A: 4 – 20 mA DC (Load resistance 350 Ω max.)

B: 2 – 10 mA DC (Load resistance 700 Ω max.)

C: 1 – 5 mA DC (Load resistance 1400 Ω max.)

D: 0 – 20 mA DC (Load resistance 350 Ω max.)

E: 0 – 16 mA DC(Load resistance 430 Ω max.)

F: 0 – 10 mA DC (Load resistance 700 Ω max.)

G: 0 – 1 mA DC (Load resistance 7000 Ω max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

ORDERING INFORMATION

• Code number: W2VABS-[1][2][3]-[4][5]

Specify a code from below for each of [1] through [5].

(e.g. W2VABS-2W11-M2/K/N/Q)

• Special input and output ranges (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

Note: When the user requires a current and a voltage

output, specify the current to be the Output 1 which allows

a greater load.

Same range availability as Output 1

[4] POWER INPUT

AC Power

[1] INPUT

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

Current

47 – 66 Hz)

DW: -20 – 0 – +20 mA DC (Input resistance 50 Ω)

EW: -16 – 0 – +16 mA DC (Inpurt resistance 62.5 Ω)

FW: -10 – 0 – +10 mA DC (Inpur resistance 100 Ω)

GW: -1 – 0 – +1 mA DC (Input resistance 1000 Ω)

KW: -100 – 0 – +100 μA DC (Input resistance 1000 Ω)

Z: Specify current (See INPUT SPECIFICATIONS)

Voltage

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

R2: 11 – 27 V DC

(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

15W: -50 – 0 – +50 mV DC (Input resistance 10 kΩ min.)

W2VABS SPECIFICATIONS

ES-5519 Rev.8 Page 1/4

http://www.m-system.co.jp/

MODEL: W2VABS

The span is the difference between 100 % and 0 % inputs.

[5] OPTIONS (multiple selections)

Response Time (0 – 90 %)

blank: Standard (≤ 0.5 sec.)

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

/K: Fast Response (Approx. 25 msec.)

Standards & Approvals (must be specified)

/N: Without CE

Minimum span: 1 mA

Offset: Max. 1.5 times span

Other Options

Load resistance: Output drive 15 V max. for Output 1;

7 V max. for Output 2

blank: none

/Q: Option other than the above (specify the specification)

■ DC Voltage: -10 – +12 V DC (up to 10 V for Output 2)

Minimum span: 5 mV

Offset: Max. 1.5 times span

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

Load resistance: Output drive 1 mA max.; at ≥ 0.5 V

/C02: Polyurethane coating

INSTALLATION

Power Consumption

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

•AC:

Approx. 4 VA at 100 V

Approx. 5 VA at 200 V

Approx. 6 VA at 240 V

GENERAL SPECIFICATIONS

Construction: Plug-in

•DC: Approx. 3 W

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 200 g (0.44 lb)

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output 1 to output 2 to power

Overrange output: 0 to 120 % (approx.) at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

Span adjustment: 95 to 105 % (front)

Adjustable individually for each output 1 and output 2.

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

1 to output 2 to power to ground)

10V

(100%)

OUT

(0%)

-10V

+10V

(-100%)

(0%)

(+100%)

INPUT SPECIFICATIONS

■ DC Current:

Shunt resistor attached to the input terminals (0.5 W)

Specify input resistance value for code Z.

■ DC Voltage: -300 – +300 V DC

Minimum span: 50 mV

Input 0 % corresponds 0 mA or 0 V.

Absolute value at ±100 % of input corresponds same value.

•Input resistance

Span 50 – 100 mV : ≥ 10 kΩ

Span 0.1 – 1 V : ≥ 100 kΩ

Span ≥ 1 V : ≥ 1 MΩ

W2VABS SPECIFICATIONS

ES-5519 Rev.8 Page 2/4

http://www.m-system.co.jp/

MODEL: W2VABS

EXTERNAL DIMENSIONS unit: mm (inch)

6 (.23)

DIN RAIL

35mm wide

2–4.2x5

(.17x.20)

MTG HOLE

6 (.24) deep

11–M3

SCREW

11 10

22 (.87)

29.5 (1.16)

21.5 (.87) 10 (.39)

84 (3.31)

114 (4.49)

[4 (.16)]

• When mounting, no extra space is needed between units.

TERMINAL ASSIGNMENTS unit: mm (inch)

INPUT RESISTOR

(model: REM2)

11 10

Input shunt resistor attached

for current input.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Output

Driver

Low Drift

Amplifier

Absolute Value

Converter

–

INPUT

OUTPUT 1

Output

Driver

OUTPUT 2

POWER

–

U(+)

V(–)

Base Socket

*Input shunt resistor attached for current input.

Note: The section enclosed by broken line is only with 2nd output option.

W2VABS SPECIFICATIONS

ES-5519 Rev.8 Page 3/4

http://www.m-system.co.jp/

MODEL: W2VABS

Specifications are subject to change without notice.

W2VABS SPECIFICATIONS

ES-5519 Rev.8 Page 4/4

http://www.m-system.co.jp/