W2XT-1V3V2-M2 [MSYSTEM]
Space-saving Dual Output Signal Conditioners Mini-MW Series;型号: | W2XT-1V3V2-M2 |
厂家: | M-SYSTEM |
描述: | Space-saving Dual Output Signal Conditioners Mini-MW Series |
文件: | 总5页 (文件大小:135K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: W2XT
N: N
Space-saving Dual Output Signal Conditioners
U: U
Mini-MW Series
L: L
P: Platinel II
0: Specify
THERMOCOUPLE TRANSMITTER
(PC programmable)
(Configurator software is used to change the input type and
precise range.)
Functions & Features
• Accepts direct input from a thermocouple and provides a
linearized process signal
[2] OUTPUT 1
Current
• PC programmable
• Wide selection of thermocouples
• User’s temperature table can be used
• High-density mounting
Z1: Range 0 – 20 mA DC
Voltage
V2: Range -10 – +10 V DC
V3: Range -5 – +5 V DC
29.5 (1.16)
(Configurator software is used to change output over the
described range of the selected suffix code.
For changing between suffix codes, set the Output Range
Selector on the side of unit before software adjustment.)
88.5 (3.48)
[3] OUTPUT 2
Same range availability as Output 1
Y: None
124 (4.88)
mm (inch)
(Configurator software is used to change output over the
described range of the selected suffix code.
For changing between suffix codes, set the Output Range
Selector on the side of unit before software adjustment.)
MODEL: W2XT–[1][2][3]-[4][5]
[4] POWER INPUT
AC Power
ORDERING INFORMATION
• Code number: W2XT-[1][2][3]-[4][5]
Specify a code from below for each of [1] through [5].
(e.g. W2XT-2Z1V3-M2/N/Q)
M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,
47 – 66 Hz)
DC Power
• Temperature range (e.g. 0 – 800°C)
• Output 1 range (e.g. 4 – 20 mA DC)
• Output 2 range (e.g. 1 – 5 V DC)
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
• Specify the specification for option code /Q
(e.g. /C01/S01/SET)
[5] OPTIONS (multiple selections)
Standards & Approvals (must be specified)
/N: Without CE
Note: When the user requires a current and a voltage
output, specify the current to be the Output 1 which allows
a greater load.
Other Options
blank: none
/Q: Option other than the above (specify the specification)
[1] INPUT THERMOCOUPLE
1: (PR)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
2: K (CA)
3: E (CRC)
4: J (IC)
/C02: Polyurethane coating
5: T (CC)
6: B (RH)
7: R
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
8: S
EX-FACTORY SETTING
9: C (WRe 5-26)
W2XT SPECIFICATIONS
ES-5508 Rev.6 Page 1/5
http://www.m-system.co.jp/
MODEL: W2XT
/SET: Preset according to the Ordering Information Sheet
(No. ESU-5508)
N N: 0–1000°C
U U: 0–300°C
L L: 0–500°C
P Platinel II: 0–1200°C
RELATED PRODUCTS
• PC configurator software (model: W2CFG)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
OUTPUT SPECIFICATIONS
■ DC Current
Operational range: 0 – 23 mA DC
Minimum span: 1 mA
Offset: Lower range can be any specific value within the
output range provided that the minimum span is
maintained.
GENERAL SPECIFICATIONS
Construction: Plug-in
Load resistance: Output drive 12 V max. for Output 1; 7 V
max. for Output 2
Connection: M3 screw terminals (torque 0.8 N·m)
Screw terminal: Chromated steel (standard) or stainless
steel
(e.g. 4 – 20 mA: 600 Ω [12 V ÷ 20 mA])
If not specified, the output range is 4 – 20 mA DC.
■ DC Voltage
Housing material: Flame-resistant resin (black)
Isolation: Input to output 1 to output 2 to power
Overrange output: -15 to +115 %
Code V2 (wide spans)
Operational range: -11.5 – +11.5 V DC
Minimum span: 1 V
(Negative current output is not available.)
Zero adjustment: -5 to +5 % (PC programming)
Span adjustment: 95 to 105 % (PC programming)
Burnout: Upscale standard; downscale, specific value output
or no burnout optional by programming
Linearization: Standard
Code V3 (narrow spans)
Operational range: -6 – +6 V DC
Minimum span: 0.5 V
Offset: Lower range can be any specific value within the
output range provided that the minimum span is
maintained.
Cold junction compensation: CJC sensor attached to the
input terminals
Load resistance: Output drive 1 mA max.
(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])
If not specified, the output range is shown below.
V2: 0 – 10 V DC
Status indicator LED: Tri-color (green/amber/red) LED;
Blinking patterns indicate operation status of the
transmitter.
V3: 1 – 5 V DC
Programming: Downloaded from PC; input type and range,
output type and range, zero and span, burnout type, user’s
linearization table, etc.
INSTALLATION
For detailed information, refer to the users manual for the
PC configurator.
Power Consumption
•AC:
Configurator connection: 2.5 dia. miniature jack;
RS-232-C level
Approx. 5 VA at 100 V
Approx. 6 VA at 200 V
Approx. 7 VA at 240 V
•DC: Approx. 3 W
INPUT SPECIFICATIONS
Input resistance: 1 MΩ min.
Burnout sensing: ≤ 4 μA
If not specified, the input range is shown below.
1 PR: 0–1600°C
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Weight: 150 g (0.33 lb)
2 K: 0–1000°C
3 E: 0–500°C
PERFORMANCE in percentage of span
Overall accuracy: Input accuracy + output accuracy
• Input accuracy: Accuracy (Table 1) + Cold Junction
Compensation Error 3°C (5.4°F)
4 J: 0–500°C
5 T: 0–300°C
6 B: 500–1600°C
7 R: 500–1600°C
• Output accuracy: Max. Output Range ÷ Span × ±0.04%
Cold junction compensation error:
8 S: 0–1600°C
9 C (WRe 5-26): 0–2000°C
±3°C at 25 ±10°C
W2XT SPECIFICATIONS
ES-5508 Rev.6 Page 2/5
http://www.m-system.co.jp/
MODEL: W2XT
±5.4°F at 77 ±18°F
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) of max. span
Response time: ≤ 1 sec. (0 – 90 %)
Burnout response: ≤ 10 sec.
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input to output
1 to output 2 to power to ground)
CALCULATION EXAMPLES OF OVERALL ACCURACY
[Example] K thermocouple, 0 – 1000°C, 4 – 20 mA DC
output
Absolute value accuracy (Table 1): 0.25°C
CJC error (3°C) added: 3.25°C
• Input accuracy = 3.25°C ÷ 1000°C × 100 = 0.325 %
Output span: 16 mA (20 – 4)
• Output accuracy = 20 mA ÷ 16 mA × 0.04 = 0.05 %
Overall accucracy including CJC error = 0.325 + 0.05 =
±0.38 % of span
Table 1.
℃
THERMO-
COUPLE
MAXIMUM
RANGE
MIN.
CONFORMANCE
RANGE
ACCURACY
SPAN
(PR)
K (CA)
E (CRC)
J (IC)
T (CC)
B (RH)
R
20
20
20
20
20
20
20
20
20
20
20
20
20
0 to 1760
-270 to +1370
-270 to +1000
-210 to +1200
-270 to +400
100 to 1820
-50 to +1760
-50 to +1760
0 to 2315
±1.00
0 to 1760
±0.25 -150 to +1370
±0.20 -170 to +1000
±0.25 -180 to +1200
±0.25 -170 to +400
±0.75
±0.50
±0.50
±0.80
400 to 1760
200 to 1760
0 to 1760
S
C (WRe 5-26
)
)
0 to 2315
N
-270 to +1300
-200 to +600
-200 to +900
0 to 1395
±0.30 -130 to +1300
±0.20 -200 to +600
±0.25 -200 to +900
U
L
P (PlatinelⅡ
±0.25
0 to 1395
°F
THERMO-
COUPLE
MIN.
MAXIMUM
RANGE
CONFORMANCE
RANGE
ACCURACY
SPAN
(PR)
K (CA)
E (CRC)
J (IC)
T (CC)
B (RH)
R
36
36
36
36
36
36
36
36
36
36
36
36
36
32 to 3200
-454 to +2498
-454 to +1832
-346 to +2192
-454 to +752
212 to 3308
-58 to +3200
-58 to +3200
32 to 4199
±1.80
32 to 3200
±0.45 -238 to +2498
±0.36 -274 to +1832
±0.45 -292 to +2192
±0.45 -274 to +752
±1.35
±0.90
±0.90
±1.44
752 to 3200
392 to 3200
32 to 3200
32 to 4199
S
C (WRe 5-26
)
)
N
-454 to +2372
-328 to +1112
-328 to +1652
32 to 2543
±0.54 -202 to +2372
±0.36 -328 to +1112
±0.45 -328 to +1652
U
L
P (PlatinelⅡ
±0.45
32 to 2543
W2XT SPECIFICATIONS
ES-5508 Rev.6 Page 3/5
http://www.m-system.co.jp/
MODEL: W2XT
EXTERNAL VIEW
FRONT VIEW
SIDE VIEW
LED1 (LD1)
LED2 (LD2)
Output 1
Configuration DIP SW
1 2 3 4
ON
LED3 (LD3)
OFF
Configurator Jack
Output 2
Configuration DIP SW
1 2 3 4
ON
*
SW2
SW1
OFF
*Provided only for two-output type.
Refer to the instruction manual for detailed procedures.
EXTERNAL DIMENSIONS unit: mm (inch)
6 (.23)
DIN RAIL
35mm wide
3
2
5
1
4
6
2–4.2x5
(.17x.20)
MTG HOLE
6 (.24) deep
9
8
7
11–M3
SCREW
11 10
22 (.87)
29.5 (1.16)
21.5 (.87) 10 (.39)
84 (3.31)
114 (4.49)
[4 (.16)]
• When mounting, no extra space is needed between units.
TERMINAL ASSIGNMENTS
CJC SENSOR
(model: CJM)
3
2
5
4
1
6
9
8
7
11 10
W2XT SPECIFICATIONS
ES-5508 Rev.6 Page 4/5
http://www.m-system.co.jp/
MODEL: W2XT
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
comp. leadwire
STATUS
T / C
+
+
1
DIP SW
Isolation
Isolation
Low Drift
Amplifier
& Burnout
–
Output
Driver
+
–
7
8
–
OUTPUT 1
Digital
Computation
Circuit
2
4
5
9
CJC
SENSOR
DIP SW
Output
Driver
+
3
6
model: CJM
OUTPUT 2
POWER
–
U(+)
V(–)
10
11
CONFIGURATOR
JACK
Base Socket
Note: The section enclosed by broken line is only with 2nd output option.
Specifications are subject to change without notice.
W2XT SPECIFICATIONS
ES-5508 Rev.6 Page 5/5
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明