W5RS-1C4-R/Q
更新时间:2024-10-29 22:22:53
品牌:MSYSTEM
描述:Terminal Block Dual Output Signal Conditioners W5-UNIT
W5RS-1C4-R/Q 概述
Terminal Block Dual Output Signal Conditioners W5-UNIT
W5RS-1C4-R/Q 数据手册
通过下载W5RS-1C4-R/Q数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载MODEL: W5RS
D: 0 – 20 mA DC (Load resistance 550 Ω max.)
Terminal Block Dual Output Signal Conditioners W5-UNIT
E: 0 – 16 mA DC (Load resistance 685 Ω max.)
F: 0 – 10 mA DC (Load resistance 1100 Ω max.)
G: 0 – 1 mA DC (Load resistance 11 kΩ max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
RTD TRANSMITTER
Functions & Features
• Accepts direct input from a RTD
• Two independent output ranges
• Four-way isolation (input to output 1 to output 2 to power)
• Linearization and burnout
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)
3: 0 – 1 V DC (Load resistance 100 Ω min.)
4: 0 – 10 V DC (Load resistance 1000 Ω min.)
5: 0 – 5 V DC (Load resistance 500 Ω min.)
6: 1 – 5 V DC (Load resistance 500 Ω min.)
4W: -10 – +10 V DC (Load resistance 2000 Ω min.)
5W: -5 – +5 V DC (Load resistance 1000 Ω min.)
0: Specify voltage (See OUTPUT SPECIFICATIONS)
• Fast response type available
• High-density mounting
45 (1.77)
97
(3.82)
[3] OUTPUT 2
Same range availability as Output 1
Y: None
41 (1.61)
mm (inch)
[4] POWER INPUT
AC Power
MODEL: W5RS-[1][2][3]-[4][5]
M: 85 – 264 V AC (Operational voltage range 85 – 264 V,
ORDERING INFORMATION
• Code number: W5RS-[1][2][3]-[4][5]
Specify a code from below for each [1] through [5].
(e.g. W5RS-4A6-R/K/BL/Q)
47 – 66 Hz)
(CE not available)
DC Power
R: 24 V DC
• Temperature range (e.g. 0 – 500°C)
• Special output ranges (For codes Z & 0)
• Specify the specification for option code /Q
(e.g. /C01/V01/S01)
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
R2: 11 – 27 V DC
(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)
(CE not available)
P: 110 V DC
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)
(CE not available)
[1] INPUT RTD (2- or 3-wire)
1: JPt 100 (JIS'89)
(Usable range: -200 to +500°C, -328 to +932°F; min.span: 50°C, 90°F)
3: Pt 100 (JIS'89)
[5] OPTIONS (multiple selections)
Response Time (0 – 90 %)
blank: Standard (≤ 0.5 sec.)
/K: Fast Response (Approx. 25 msec.)
Burnout
(Usable range: -200 to +650°C, -328 to +1202°F; min.span: 50°C, 90°F)
4: Pt 100 (JIS'97, IEC)
(Usable range: -200 to +850°C, -328 to +1562°F; min.span: 50°C, 90°F)
5: Pt 50 Ω (JIS'81)
(Usable range: -200 to +500°C, -328 to +932°F; min.span: 100°C, 180°F)
6: Ni 508.4 Ω
blank: Upscale burnout
/BL: Downscale burnout
(Usable range: -50 to +200°C, -58 to +392°F; min.span: 30°C, 54°F)
0: Specify
Other Options
blank: none
Note: Consult M-System for 2-wire RTD
/Q: Option other than the above (specify the specification)
[2] OUTPUT 1
Current
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
A: 4 – 20 mA DC (Load resistance 550 Ω max.)
B: 2 – 10 mA DC (Load resistance 1100 Ω max.)
C: 1 – 5 mA DC (Load resistance 2200 Ω max.)
/C02: Polyurethane coating
W5RS SPECIFICATIONS
ES-8509 Rev.9 Page 1/3
http://www.m-system.co.jp/
MODEL: W5RS
/C03: Rubber coating
PERFORMANCE in percentage of span
Accuracy: ±0.2 %
ADJUSTMENT
/V01: Multi-turn fine adjustment
/VN: Sealed adjustment holes
TERMINAL SCREW MATERIAL
/S01: Stainless steel
Temp. coefficient:
±0.015 %/°C or ±0.008 %/°F
(at 200°C or 360°F or greater spans)
±0.02 %/°C or ±0.01 %/°F
(at narrower than 200°C or 360°F spans)
Burnout response: ≤ 10 sec.
GENERAL SPECIFICATIONS
Construction: Terminal block
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength:
Connection
Input: M3.5 screw terminals (torque 0.8 N·m)
Output & power: M3 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel (standard) or stainless
steel
2000 V AC @1 minute (input to output 1 or output 2 to
power to ground)
1000 V AC @1 minute (output 1 to output 2)
Housing material: Flame-resistant resin (black)
Isolation: Input to output 1 to output 2 to power
Overrange output: Approx. -10 to +120 % at 1 – 5 V
Zero adjustment: -2 to +2 % (front)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
Span adjustment: 98 to 102 % (front)
At burnout: Downscale ≤ -10 %, Upscale ≥ 110 %,
For output code 4W, Downscale ≤ -3%, Upscale ≥ 103%
Linearization: Standard
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
INPUT SPECIFICATIONS
Maximum leadwire resistance: 200 Ω per wire (3-wire)
Sensing current: 2 mA (Pt); 1 mA (Ni 508.4 Ω)
OUTPUT SPECIFICATIONS
■ DC Current: 0 – 20 mA DC
Minimum span: 1 mA
Offset: Max. 1.5 times span
Load resistance: Output drive 11 V max.
■ DC Voltage: -10 – +12 V DC
Spans: Min. 5 mV, max. 20 V
Offset: Max. 1.5 times span
Load resistance: Output drive 10 mA max.; 5 mA for
negative voltage output; at ≥ 0.5 V
INSTALLATION
Power Consumption
•AC:
Approx. 4 VA at 100 V
Approx. 5 VA at 200 V
Approx. 6 VA at 264 V
•DC: Approx. 3 W
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 0 to 90 %RH (non-condensing)
Mounting: DIN rail
Weight: 130 g (0.29 lb)
W5RS SPECIFICATIONS
ES-8509 Rev.9 Page 2/3
http://www.m-system.co.jp/
MODEL: W5RS
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
7.4 (.29)
5–M3.5 SCREW
1
2
3
4
5
DIN RAIL
35mm wide
6 (.24)
6
7
8
9 10 11
45 (1.77)
41 (1.61)
[3.3 (.13)]
6–M3 SCREW
• When mounting, no extra space is needed between units.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Burnout
RTD
5
4
3
2
1
A
B
B
Z
S
Isolation
Reference
Resistor
+
Differential
Amplifier
Voltage
Amplifier
Output
Driver
–
6
7
+
–
Constant
Current
OUTPUT 1
Z
S
Linearizer
Output
Driver
8
9
+
OUTPUT 2
POWER
–
10
11
U(+)
V(–)
Note 1: The section enclosed by broken line is only with 2nd output option.
Note 2: DO NOT connect to the terminals 1 – 2.
Specifications are subject to change without notice.
W5RS SPECIFICATIONS
ES-8509 Rev.9 Page 3/3
http://www.m-system.co.jp/
W5RS-1C4-R/Q 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
W5RS-1C4-R2 | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 | |
W5RS-1C4-R2/BL | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 | |
W5RS-1C4-R2/Q | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 | |
W5RS-1C5-M | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 | |
W5RS-1C5-M/BL | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 | |
W5RS-1C5-M/K | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 | |
W5RS-1C5-M/Q | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 | |
W5RS-1C5-P | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 | |
W5RS-1C5-P/BL | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 | |
W5RS-1C5-P/Q | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 |
W5RS-1C4-R/Q 相关文章
- 2024-10-31
- 6
- 2024-10-31
- 6
- 2024-10-31
- 7
- 2024-10-31
- 8