W5RS-6D4-P

更新时间:2024-10-29 22:22:41
品牌:MSYSTEM
描述:Terminal Block Dual Output Signal Conditioners W5-UNIT

W5RS-6D4-P 概述

Terminal Block Dual Output Signal Conditioners W5-UNIT

W5RS-6D4-P 数据手册

通过下载W5RS-6D4-P数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
MODEL: W5RS  
D: 0 – 20 mA DC (Load resistance 550 Ω max.)  
Terminal Block Dual Output Signal Conditioners W5-UNIT  
E: 0 – 16 mA DC (Load resistance 685 Ω max.)  
F: 0 – 10 mA DC (Load resistance 1100 Ω max.)  
G: 0 – 1 mA DC (Load resistance 11 kΩ max.)  
Z: Specify current (See OUTPUT SPECIFICATIONS)  
Voltage  
RTD TRANSMITTER  
Functions & Features  
• Accepts direct input from a RTD  
• Two independent output ranges  
• Four-way isolation (input to output 1 to output 2 to power)  
• Linearization and burnout  
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)  
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)  
3: 0 – 1 V DC (Load resistance 100 Ω min.)  
4: 0 – 10 V DC (Load resistance 1000 Ω min.)  
5: 0 – 5 V DC (Load resistance 500 Ω min.)  
6: 1 – 5 V DC (Load resistance 500 Ω min.)  
4W: -10 – +10 V DC (Load resistance 2000 Ω min.)  
5W: -5 – +5 V DC (Load resistance 1000 Ω min.)  
0: Specify voltage (See OUTPUT SPECIFICATIONS)  
• Fast response type available  
• High-density mounting  
45 (1.77)  
97  
(3.82)  
[3] OUTPUT 2  
Same range availability as Output 1  
Y: None  
41 (1.61)  
mm (inch)  
[4] POWER INPUT  
AC Power  
MODEL: W5RS-[1][2][3]-[4][5]  
M: 85 – 264 V AC (Operational voltage range 85 – 264 V,  
ORDERING INFORMATION  
• Code number: W5RS-[1][2][3]-[4][5]  
Specify a code from below for each [1] through [5].  
(e.g. W5RS-4A6-R/K/BL/Q)  
47 – 66 Hz)  
(CE not available)  
DC Power  
R: 24 V DC  
• Temperature range (e.g. 0 – 500°C)  
• Special output ranges (For codes Z & 0)  
• Specify the specification for option code /Q  
(e.g. /C01/V01/S01)  
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)  
R2: 11 – 27 V DC  
(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)  
(CE not available)  
P: 110 V DC  
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)  
(CE not available)  
[1] INPUT RTD (2- or 3-wire)  
1: JPt 100 (JIS'89)  
(Usable range: -200 to +500°C, -328 to +932°F; min.span: 50°C, 90°F)  
3: Pt 100 (JIS'89)  
[5] OPTIONS (multiple selections)  
Response Time (0 – 90 %)  
blank: Standard (≤ 0.5 sec.)  
/K: Fast Response (Approx. 25 msec.)  
Burnout  
(Usable range: -200 to +650°C, -328 to +1202°F; min.span: 50°C, 90°F)  
4: Pt 100 (JIS'97, IEC)  
(Usable range: -200 to +850°C, -328 to +1562°F; min.span: 50°C, 90°F)  
5: Pt 50 Ω (JIS'81)  
(Usable range: -200 to +500°C, -328 to +932°F; min.span: 100°C, 180°F)  
6: Ni 508.4 Ω  
blank: Upscale burnout  
/BL: Downscale burnout  
(Usable range: -50 to +200°C, -58 to +392°F; min.span: 30°C, 54°F)  
0: Specify  
Other Options  
blank: none  
Note: Consult M-System for 2-wire RTD  
/Q: Option other than the above (specify the specification)  
[2] OUTPUT 1  
Current  
SPECIFICATIONS OF OPTION: Q (multiple selections)  
COATING (For the detail, refer to M-System's web site.)  
/C01: Silicone coating  
A: 4 – 20 mA DC (Load resistance 550 Ω max.)  
B: 2 – 10 mA DC (Load resistance 1100 Ω max.)  
C: 1 – 5 mA DC (Load resistance 2200 Ω max.)  
/C02: Polyurethane coating  
W5RS SPECIFICATIONS  
ES-8509 Rev.9 Page 1/3  
http://www.m-system.co.jp/  
MODEL: W5RS  
/C03: Rubber coating  
PERFORMANCE in percentage of span  
Accuracy: ±0.2 %  
ADJUSTMENT  
/V01: Multi-turn fine adjustment  
/VN: Sealed adjustment holes  
TERMINAL SCREW MATERIAL  
/S01: Stainless steel  
Temp. coefficient:  
±0.015 %/°C or ±0.008 %/°F  
(at 200°C or 360°F or greater spans)  
±0.02 %/°C or ±0.01 %/°F  
(at narrower than 200°C or 360°F spans)  
Burnout response: ≤ 10 sec.  
GENERAL SPECIFICATIONS  
Construction: Terminal block  
Line voltage effect: ±0.1 % over voltage range  
Insulation resistance: ≥ 100 MΩ with 500 V DC  
Dielectric strength:  
Connection  
Input: M3.5 screw terminals (torque 0.8 N·m)  
Output & power: M3 screw terminals (torque 0.8 N·m)  
Screw terminal: Nickel-plated steel (standard) or stainless  
steel  
2000 V AC @1 minute (input to output 1 or output 2 to  
power to ground)  
1000 V AC @1 minute (output 1 to output 2)  
Housing material: Flame-resistant resin (black)  
Isolation: Input to output 1 to output 2 to power  
Overrange output: Approx. -10 to +120 % at 1 – 5 V  
Zero adjustment: -2 to +2 % (front)  
STANDARDS & APPROVALS  
EU conformity:  
EMC Directive  
Span adjustment: 98 to 102 % (front)  
At burnout: Downscale ≤ -10 %, Upscale ≥ 110 %,  
For output code 4W, Downscale ≤ -3%, Upscale ≥ 103%  
Linearization: Standard  
EMI EN 61000-6-4  
EMS EN 61000-6-2  
RoHS Directive  
EN 50581  
INPUT SPECIFICATIONS  
Maximum leadwire resistance: 200 Ω per wire (3-wire)  
Sensing current: 2 mA (Pt); 1 mA (Ni 508.4 Ω)  
OUTPUT SPECIFICATIONS  
■ DC Current: 0 – 20 mA DC  
Minimum span: 1 mA  
Offset: Max. 1.5 times span  
Load resistance: Output drive 11 V max.  
DC Voltage: -10 – +12 V DC  
Spans: Min. 5 mV, max. 20 V  
Offset: Max. 1.5 times span  
Load resistance: Output drive 10 mA max.; 5 mA for  
negative voltage output; at ≥ 0.5 V  
INSTALLATION  
Power Consumption  
AC:  
Approx. 4 VA at 100 V  
Approx. 5 VA at 200 V  
Approx. 6 VA at 264 V  
DC: Approx. 3 W  
Operating temperature: -5 to +55°C (23 to 131°F)  
Operating humidity: 0 to 90 %RH (non-condensing)  
Mounting: DIN rail  
Weight: 130 g (0.29 lb)  
W5RS SPECIFICATIONS  
ES-8509 Rev.9 Page 2/3  
http://www.m-system.co.jp/  
MODEL: W5RS  
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)  
7.4 (.29)  
5–M3.5 SCREW  
1
2
3
4
5
DIN RAIL  
35mm wide  
6 (.24)  
6
7
8
9 10 11  
45 (1.77)  
41 (1.61)  
[3.3 (.13)]  
6–M3 SCREW  
• When mounting, no extra space is needed between units.  
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM  
Burnout  
RTD  
5
4
3
2
1
A
B
B
Z
S
Isolation  
Reference  
Resistor  
+
Differential  
Amplifier  
Voltage  
Amplifier  
Output  
Driver  
6
7
+
Constant  
Current  
OUTPUT 1  
Z
S
Linearizer  
Output  
Driver  
8
9
+
OUTPUT 2  
POWER  
10  
11  
U(+)  
V(–)  
Note 1: The section enclosed by broken line is only with 2nd output option.  
Note 2: DO NOT connect to the terminals 1 – 2.  
Specifications are subject to change without notice.  
W5RS SPECIFICATIONS  
ES-8509 Rev.9 Page 3/3  
http://www.m-system.co.jp/  

W5RS-6D4-P 相关器件

型号 制造商 描述 价格 文档
W5RS-6D4-P/BL MSYSTEM Terminal Block Dual Output Signal Conditioners W5-UNIT 获取价格
W5RS-6D4-P/Q MSYSTEM Terminal Block Dual Output Signal Conditioners W5-UNIT 获取价格
W5RS-6D4-R MSYSTEM Terminal Block Dual Output Signal Conditioners W5-UNIT 获取价格
W5RS-6D4-R/BL MSYSTEM Terminal Block Dual Output Signal Conditioners W5-UNIT 获取价格
W5RS-6D4-R/K MSYSTEM Terminal Block Dual Output Signal Conditioners W5-UNIT 获取价格
W5RS-6D4-R/Q MSYSTEM Terminal Block Dual Output Signal Conditioners W5-UNIT 获取价格
W5RS-6D4-R2 MSYSTEM Terminal Block Dual Output Signal Conditioners W5-UNIT 获取价格
W5RS-6D4-R2/BL MSYSTEM Terminal Block Dual Output Signal Conditioners W5-UNIT 获取价格
W5RS-6D4-R2/Q MSYSTEM Terminal Block Dual Output Signal Conditioners W5-UNIT 获取价格
W5RS-6D5-M MSYSTEM Terminal Block Dual Output Signal Conditioners W5-UNIT 获取价格

W5RS-6D4-P 相关文章

  • HARTING(浩亭)圆形连接器产品选型手册
    2024-10-31
    6
  • HYCON(宏康科技)产品选型手册
    2024-10-31
    6
  • GREEGOO整流二极管和晶闸管产品选型手册
    2024-10-31
    7
  • 西门子豪掷106亿美元,战略收购工程软件巨头Altair
    2024-10-31
    8