W5VS-2AY-R2
更新时间:2024-10-29 22:46:44
品牌:MSYSTEM
描述:Terminal Block Dual Output Signal Conditioners W5-UNIT
W5VS-2AY-R2 概述
Terminal Block Dual Output Signal Conditioners W5-UNIT
W5VS-2AY-R2 数据手册
通过下载W5VS-2AY-R2数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载MODEL: W5VS
(Choose 01 for CE. Power suffix code R only.)
Terminal Block Dual Output Signal Conditioners W5-UNIT
02: Specify voltage (See INPUT SPECIFICATIONS)
(CE not available. Power suffix code M, R2, P only.)
SIGNAL TRANSMITTER
Functions & Features
[2] OUTPUT 1
Current
• Converts a DC input into two isolated outputs
• Two independent output ranges
A: 4 – 20 mA DC (Load resistance 550 Ω max.)
B: 2 – 10 mA DC (Load resistance 1100 Ω max.)
C: 1 – 5 mA DC (Load resistance 2200 Ω max.)
D: 0 – 20 mA DC (Load resistance 550 Ω max.)
E: 0 – 16 mA DC (Load resistance 685 Ω max.)
F: 0 – 10 mA DC (Load resistance 1100 Ω max.)
G: 0 – 1 mA DC (Load resistance 11 kΩ max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
• Four-way isolation (input to output 1 to output 2 to power)
• Fast response type available
• High-density mounting
45 (1.77)
97
(3.82)
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)
3: 0 – 1 V DC (Load resistance 100 Ω min.)
4: 0 – 10 V DC (Load resistance 1000 Ω min.)
5: 0 – 5 V DC (Load resistance 500 Ω min.)
6: 1 – 5 V DC (Load resistance 500 Ω min.)
4W: -10 – +10 V DC (Load resistance 2000 Ω min.)
5W: -5 – +5 V DC (Load resistance 1000 Ω min.)
0: Specify voltage (See OUTPUT SPECIFICATIONS)
41 (1.61)
mm (inch)
MODEL: W5VS-[1][2][3]-[4][5]
ORDERING INFORMATION
Specify a code from below for each [1] through [5].
• Code number: W5VS-[1][2][3]-[4][5]
(e.g. W5VS-6A6-R/K/Q)
• Special input and output ranges (For codes Z, 0, 01 & 02)
• Specify the specification for option code /Q
(e.g. /C01/V01/S01)
[3] OUTPUT 2
Same range availability as Output 1
Y: None
[1] INPUT
Current
[4] POWER INPUT
AC Power
A: 4 – 20 mA DC (Input resistance 249 Ω)
B: 2 – 10 mA DC (Input resistance 499 Ω)
C: 1 – 5 mA DC (Input resistance 1000 Ω)
D: 0 – 20 mA DC (Input resistance 49.9 Ω)
E: 0 – 16 mA DC (Input resistance 61.9 Ω)
F: 0 – 10 mA DC (Input resistance 100 Ω)
G: 0 – 1 mA DC (Input resistance 1000 Ω)
H: 10 – 50 mA DC (Input resistance 20 Ω)
Z: Specify current (See INPUT SPECIFICATIONS)
Voltage
M: 85 – 264 V AC (Operational voltage range 85 – 264 V,
47 – 66 Hz)
(CE not available)
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
R2: 11 – 27 V DC
(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)
(CE not available)
P: 110 V DC
16: 0 – 60 mV DC (Input resistance 1 MΩ min.)
3: 0 – 1 V DC (Input resistance 1 MΩ min.)
4: 0 – 10 V DC (Input resistance 1 MΩ min.)
5: 0 – 5 V DC (Input resistance 1 MΩ min.)
6: 1 – 5 V DC (Input resistance 1 MΩ min.)
4W: -10 – +10 V DC (Input resistance 1 MΩ min.)
5W: -5 – +5 V DC (Input resistance 1 MΩ min.)
0: Specify voltage (See INPUT SPECIFICATIONS)
(CE not available. Power suffix code M, R2, P only.)
01: Specify voltage (See INPUT SPECIFICATIONS)
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)
(CE not available)
[5] OPTIONS (multiple selections)
Response Time (0 – 90 %)
blank: Standard (≤ 0.5 sec.)
/K: Fast Response (Approx. 25 msec.)
Other Options
blank: none
W5VS SPECIFICATIONS
ES-8513 Rev.12 Page 1/3
http://www.m-system.co.jp/
MODEL: W5VS
/Q: Option other than the above (specify the specification)
OUTPUT SPECIFICATIONS
■ DC Current: 0 – 20 mA DC
Minimum span: 1 mA
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
Offset: Max. 1.5 times span
Load resistance: Output drive 11 V max.
■ DC Voltage: -10 – +12 V DC
Spans: Min. 5 mV, max. 20 V
/C02: Polyurethane coating
/C03: Rubber coating
Offset: Max. 1.5 times span
ADJUSTMENT
Load resistance: Output drive 10 mA max.; 5 mA for
negative voltage output; at ≥ 0.5 V
/V01: Multi-turn fine adjustment
/VN: Sealed adjustment holes
TERMINAL SCREW MATERIAL
/S01: Stainless steel
INSTALLATION
Power Consumption
•AC:
GENERAL SPECIFICATIONS
Construction: Terminal block
Approx. 4 VA at 100 V
Approx. 5 VA at 200 V
Connection
Approx. 6 VA at 264 V
Input: M3.5 screw terminals (torque 0.8 N·m)
Output & power: M3 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel (standard) or stainless
steel
•DC: Approx. 3 W
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 0 to 90 %RH (non-condensing)
Mounting: DIN rail
Housing material: Flame-resistant resin (black)
Isolation: Input to output 1 to output 2 to power
Overrange output: Approx. -10 to +120 % at 1 – 5 V
Zero adjustment: -2 to +2 % (front)
(±1 % with the input suffix codes 4W and 5W selected)
Span adjustment: 98 to 102 % (front)
(99 to 101 % with the input suffix codes 4W and 5W
selected.)
Weight: 130 g (0.29 lb)
PERFORMANCE in percentage of span
Accuracy: ±0.1 %
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength:
2000 V AC @1 minute (input to output 1 or output 2 to
power to ground)
INPUT SPECIFICATIONS
■ DC Current: Input resistor incorporated
Specify input resistance value among followings for code Z.
20Ω, 49.9Ω, 61.9Ω, 100Ω, 249Ω, 499Ω, 1000Ω
1000 V AC @1 minute (output 1 to output 2)
(0.125 W ≥ [Input current]
2
× R)
STANDARDS & APPROVALS
EU conformity:
■ DC Voltage
Input resistance: 1 MΩ min.; 10 kΩ min. for the input code
02
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
10 kΩ min. at power loss
•Input code 0 (Not CE)
Voltage range: -300 – +300 V DC
Minimum span: 100 mV
EN 50581
Offset: Max. 1.5 times span
•Input code 01 (CE)
Voltage range: -70 – +70 V DC
Minimum span: 100 mV
Offset: Max. 1.5 times span
•Input code 02 (Not CE)
Voltage range: -100 – +100 mV DC
Minimum span: 5 mV
Offset: Max. 1.5 times span
W5VS SPECIFICATIONS
ES-8513 Rev.12 Page 2/3
http://www.m-system.co.jp/
MODEL: W5VS
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
7.4 (.29)
5–M3.5 SCREW
1
2
3
4
5
DIN RAIL
35mm wide
6 (.24)
6
7
8
9 10 11
45 (1.77)
41 (1.61)
[3.3 (.13)]
6–M3 SCREW
• When mounting, no extra space is needed between units.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Z
S
Isolation
Low Drift
Amplifier
Output
Driver
+
–
4
5
1
2
3
6
7
+
–
*
INPUT
OUTPUT 1
Z
S
Output
Driver
8
9
+
OUTPUT 2
POWER
–
10
11
U(+)
V(–)
*Input shunt resistor attached for current input.
Note 1: The section enclosed by broken line is only with 2nd output option.
Note 2: DO NOT connect to the terminals 1 – 2 – 3.
Specifications are subject to change without notice.
W5VS SPECIFICATIONS
ES-8513 Rev.12 Page 3/3
http://www.m-system.co.jp/
W5VS-2AY-R2 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
W5VS-2AY-R2/K | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 | |
W5VS-2AY-R2/Q | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 | |
W5VS-2B1-M | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 | |
W5VS-2B1-M/K | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 | |
W5VS-2B1-M/Q | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 | |
W5VS-2B1-P | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 | |
W5VS-2B1-P/K | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 | |
W5VS-2B1-P/Q | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 | |
W5VS-2B1-R | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 | |
W5VS-2B1-R/K | MSYSTEM | Terminal Block Dual Output Signal Conditioners W5-UNIT | 获取价格 |
W5VS-2AY-R2 相关文章
- 2024-10-31
- 6
- 2024-10-31
- 6
- 2024-10-31
- 7
- 2024-10-31
- 8