首页 |元器件品牌 | PCB在线计价/下单
首页 > WAC-A2BA-R/Q

WAC-A2BA-R/Q

更新时间：2024-10-29 22:32:47
品牌：MSYSTEM
描述：Dual Output Plug-in Signal Conditioners W-UNIT

PDF下载

中文翻译

PCB计价

WAC-A2BA-R/Q 概述

Dual Output Plug-in Signal Conditioners W-UNIT

WAC-A2BA-R/Q 数据手册

通过下载WAC-A2BA-R/Q数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
MODEL: WAC  
A4: 0 – 5 V AC (Input resistance 100 kΩ min.)  
Dual Output Plug-in Signal Conditioners W-UNIT  
A5: 0 – 10 V AC (Input resistance 100 kΩ min.)  
A6: 0 – 120 V AC (Input resistance 100 kΩ min.)  
A7: 0 – 150 V AC (Input resistance 100 kΩ min.)  
A8: Specify voltage (See INPUT SPECIFICATIONS)  
(0 % input must be 0 V.)  
AC TRANSMITTER  
Functions & Features  
• Converting an alternating current/voltage into two  
standard process signals  
• True RMS sensing  
[2] OUTPUT 1  
Current  
• Isolation up to 2000 V AC  
• LCD meter  
A: 4 – 20 mA DC (Load resistance 600 Ω max.)  
B: 2 – 10 mA DC (Load resistance 1200 Ω max.)  
C: 1 – 5 mA DC (Load resistance 2400 Ω max.)  
D: 0 – 20 mA DC (Load resistance 600 Ω max.)  
E: 0 – 16 mA DC (Load resistance 750 Ω max.)  
F: 0 – 10 mA DC (Load resistance 1200 Ω max.)  
G: 0 – 1 mA DC (Load resistance 12 kΩ max.)  
Z: Specify current (See OUTPUT SPECIFICATIONS)  
Voltage  
• High-density mounting  
Typical Applications  
• Converting a large AC current in combination with a shunt  
resistor, or a narrow span AC voltage  
50  
(1.97)  
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)  
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)  
3: 0 – 1 V DC (Load resistance 1000 Ω min.)  
4: 0 – 10 V DC (Load resistance 10 kΩ min.)  
5: 0 – 5 V DC (Load resistance 5000 Ω min.)  
6: 1 – 5 V DC (Load resistance 5000 Ω min.)  
4W: -10 – +10 V DC (Load resistance 10 kΩ min.)  
5W: -5 – +5 V DC (Load resistance 5000 Ω min.)  
0: Specify voltage (See OUTPUT SPECIFICATIONS)  
80  
(3.15)  
136  
(5.35)  
mm (inch)  
MODEL: WAC–[1][2][3]–[4][5]  
ORDERING INFORMATION  
• Code number: WAC-[1][2][3]-[4][5]  
Specify a code from below for each of [1] through [5].  
(e.g. WAC-A1A6-B/E/Q)  
[3] OUTPUT 2  
Current  
A: 4 – 20 mA DC (Load resistance 350 Ω max.)  
B: 2 – 10 mA DC (Load resistance 700 Ω max.)  
C: 1 – 5 mA DC (Load resistance 1400 Ω max.)  
D: 0 – 20 mA DC (Load resistance 350 Ω max.)  
E: 0 – 16 mA DC(Load resistance 430 Ω max.)  
F: 0 – 10 mA DC (Load resistance 700 Ω max.)  
G: 0 – 1 mA DC (Load resistance 7000 Ω max.)  
Z: Specify current (See OUTPUT SPECIFICATIONS)  
Voltage  
• Special input and output ranges (For codes AZ, A8, Z & 0)  
• Specify the specification for option code /Q  
(e.g. /C01/S01)  
Note: When the user requires a current and a voltage  
output, specify the current to be the Output 1 which allows  
a greater load.  
Same range availability as Output 1  
[1] INPUT  
Current  
AA: 0 – 10 mA AC (Input resistance 100 Ω)  
AB: 0 – 50 mA AC (Input resistance 20 Ω)  
AC: 0 – 100 mA AC (Input resistance 10 Ω)  
AD: 0 – 500 mA AC (Input resistance 1 Ω)  
AZ: Specify current (See INPUT SPECIFICATIONS)  
(0 % input must be 0 mA.)  
[4] POWER INPUT  
AC Power  
B: 100 V AC  
C: 110 V AC  
D: 115 V AC  
F: 120 V AC  
Voltage  
G: 200 V AC  
H: 220 V AC  
J: 240 V AC  
A1: 0 – 100 mV AC (Input resistance 100 kΩ min.)  
A2: 0 – 500 mV AC (Input resistance 100 kΩ min.)  
A3: 0 – 1 V AC (Input resistance 100 kΩ min.)  
DC Power  
WAC SPECIFICATIONS  
ES-2236 Rev.8 Page 1/3  
http://www.m-system.co.jp/  
MODEL: WAC  
S: 12 V DC  
R: 24 V DC  
V: 48 V DC  
P: 110 V DC  
Span ≤ 500 mA: 1 Ω  
Span ≤ 1 A: 0.5 Ω  
■ AC Voltage: 0 – 250 V AC  
Minimum span: 50 mV  
Input resistance: 100 kΩ min.  
[5] OPTIONS (multiple selections)  
Input Signal Indicator  
OUTPUT SPECIFICATIONS  
■ DC Current: 0 – 20 mA DC  
blank: Without  
/E: With (0.0 - 100.0 % display)  
Other Options  
Minimum span: 1 mA  
Offset: Max. 1.5 times span  
blank: none  
Load resistance: Output drive 12 V max. for Output 1;  
7 V max. for Output 2  
/Q: Option other than the above (specify the specification)  
■ DC Voltage: -10 – +12 V DC  
Minimum span: 5 mV  
SPECIFICATIONS OF OPTION: Q (multiple selections)  
COATING (For the detail, refer to M-System's web site.)  
/C01: Silicone coating  
Offset: Max. 1.5 times span  
Load resistance: Output drive 1 mA max. at ≥ 0.5 V  
/C02: Polyurethane coating  
/C03: Rubber coating  
INSTALLATION  
TERMINAL SCREW MATERIAL  
/S01: Stainless steel  
Power input  
•AC: Operational voltage range: rating ±10 %,  
50/60 ±2 Hz, approx. 3 VA  
•DC: Operational voltage range: rating ±10 %,  
or 85 – 150 V for 110 V rating, ripple 10 %p-p max.,  
approx. 3 W (125 mA at 24 V)  
GENERAL SPECIFICATIONS  
Construction: Plug-in  
Connection: M3.5 screw terminals  
Screw terminal: Chromated steel (standard) or stainless  
steel  
Operating temperature: -5 to +55°C (23 to 131°F)  
Operating humidity: 30 to 90 %RH (non-condensing)  
Mounting: Surface or DIN rail  
Housing material: Flame-resistant resin (black)  
Isolation: Input to output 1 to output 2 to power  
Input waveform  
Weight: 400 g (0.88 lb)  
RMS sensing: Up to 15 % of 3rd harmonic content  
Overrange output: 0 to 120 % at 1 – 5 V  
Zero adjustment: -5 to +5 % (front)  
Span adjustment: 95 to 105 % (front)  
Adjustable individually for each output 1 and output 2.  
■ DISPLAY (Input indicator)  
PERFORMANCE in percentage of span  
Accuracy: ±0.4 %  
Display accuracy: ±(0.4 % of FS + 1 digit)  
Temp. coefficient: ±0.05 %/°C (±0.03 %/°F)  
Response time: ≤ 0.7 sec. (0 – 90 %)  
Ripple: 0.5 %p-p max.  
LCD digital display: 0.0 - 100.0 % (min. digit 0.1 %)  
(No scaling)  
Line voltage effect: ±0.1 % over voltage range  
Insulation resistance: ≥ 100 MΩ with 500 V DC  
Dielectric strength: 2000 V AC @1 minute  
(input to output to power to ground)  
1000 V AC @ 1 minute (output 1 to output 2)  
INPUT SPECIFICATIONS  
Frequency: 40 Hz min., 1 kHz max.  
■ AC Current: 0 – 1 A AC; input resistor incorporated  
Minimum span: 1 mA  
Input resistance  
Span 1 mA: 1 kΩ  
Span ≤ 2 mA: 500 Ω  
Span ≤ 5 mA: 200 Ω  
Span ≤ 10 mA: 100 Ω  
Span ≤ 20 mA: 50 Ω  
Span ≤ 50 mA: 20 Ω  
Span ≤ 100 mA: 10 Ω  
WAC SPECIFICATIONS  
ES-2236 Rev.8 Page 2/3  
http://www.m-system.co.jp/  
MODEL: WAC  
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)  
CLAMP  
(top & bottom)  
7.8 (.31)  
DIN RAIL  
35mm wide  
8
7
6
5
4
2–  
4.5 (.18) dia.  
MTG HOLE  
25 (.98) deep  
9
3
2
10 11  
1
11  
–M3.5  
SCREW  
50 (1.97)  
107 (4.21)  
136 (5.35)  
40 (1.57)  
50 (1.97)  
[3.3 (.13)]  
• When mounting, no extra space is needed between units.  
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM  
**  
Z
S
Isolation  
AC  
Amplifier  
R.M.S.  
Operation  
Output  
Driver  
*
5
6
4
3
9
1
2
+
–
INPUT  
OUTPUT 1  
Z
S
Output  
Driver  
10 +  
11 –  
OUTPUT 2  
POWER  
7
8
U(+)  
V(–)  
Base Socket  
*
Input shunt resistor incorporated for current input  
** Option /E  
Specifications are subject to change without notice.  
WAC SPECIFICATIONS  
ES-2236 Rev.8 Page 3/3  
http://www.m-system.co.jp/  

WAC-A2BA-R/Q 相关器件

型号 制造商 描述 价格 文档
WAC-A2BA-S MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格
WAC-A2BA-S/Q MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格
WAC-A2BA-V MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格
WAC-A2BA-V/Q MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格
WAC-A2BB-B MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格
WAC-A2BB-B/Q MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格
WAC-A2BB-C MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格
WAC-A2BB-C/Q MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格
WAC-A2BB-D MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格
WAC-A2BB-D/Q MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格

WAC-A2BA-R/Q 相关文章

  • HARTING(浩亭)圆形连接器产品选型手册
    2024-10-31
    6
  • HYCON(宏康科技)产品选型手册
    2024-10-31
    6
  • GREEGOO整流二极管和晶闸管产品选型手册
    2024-10-31
    7
  • 西门子豪掷106亿美元，战略收购工程软件巨头Altair
    2024-10-31
    8

    • 热门型号

  • LM358
  • UPC8158
  • XC6105A618
  • 2N5087/D28Z
  • TMM-136-06-S-S-SM-23-P
  • NC7WZ16P6X
  • SDR10KSM
  • STC53K33N07
  • ERG3SG242
  • M2XRP2-J1Z1-R
  • TMM-139-01-G-S-SM
  • 54F20
  • TMP513
  • SZ6A11
  • PEL12S
  • 概述
  • 数据手册
    • 2024 ICPDF网 联系我们和版权申明:QQ 272164286