WJV-AA1-V

更新时间:2024-10-29 22:57:26
品牌:MSYSTEM
描述:Dual Output Plug-in Signal Conditioners W-UNIT

WJV-AA1-V 概述

Dual Output Plug-in Signal Conditioners W-UNIT

WJV-AA1-V 数据手册

通过下载WJV-AA1-V数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
MODEL: WJV  
(Minimum span 0.3 V,Input resistance 1 MΩ min.)  
Dual Output Plug-in Signal Conditioners W-UNIT  
[2] OUTPUT 1  
Current  
SIGNAL TRANSMITTER  
(field-programmable)  
A: 4 – 20 mA DC (Load resistance 600 Ω max.)  
B: 2 – 10 mA DC (Load resistance 1200 Ω max.)  
C: 1 – 5 mA DC (Load resistance 2400 Ω max.)  
D: 0 – 20 mA DC (Load resistance 600 Ω max.)  
E: 0 – 16 mA DC (Load resistance 750 Ω max.)  
F: 0 – 10 mA DC (Load resistance 1200 Ω max.)  
G: 0 – 1 mA DC (Load resistance 12 kΩ max.)  
Z: Specify current (See OUTPUT SPECIFICATIONS)  
Voltage  
Functions & Features  
• Converting a DC input into a standard process signal  
• Micro-processor based  
• Field-programmable input range  
• Isolation up to 2000 V AC  
• Loop testing via hand-held programmer PU-2x  
• Highdensity mounting  
Typical Applications  
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)  
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)  
3: 0 – 1 V DC (Load resistance 1000 Ω min.)  
4: 0 – 10 V DC (Load resistance 10 kΩ min.)  
5: 0 – 5 V DC (Load resistance 5000 Ω min.)  
6: 1 – 5 V DC (Load resistance 5000 Ω min.)  
4W: -10 – +10 V DC (Load resistance 10 kΩ min.)  
5W: -5 – +5 V DC (Load resistance 5000 Ω min.)  
0: Specify voltage (See OUTPUT SPECIFICATIONS)  
• Isolation between control room and field instrumentation  
• Ideal for quick spare part  
50  
(1.97)  
80  
(3.15)  
136  
(5.35)  
mm (inch)  
[3] OUTPUT 2  
Current  
A: 4 – 20 mA DC (Load resistance 350 Ω max.)  
B: 2 – 10 mA DC (Load resistance 700 Ω max.)  
C: 1 – 5 mA DC (Load resistance 1400 Ω max.)  
D: 0 – 20 mA DC (Load resistance 350 Ω max.)  
E: 0 – 16 mA DC(Load resistance 430 Ω max.)  
F: 0 – 10 mA DC (Load resistance 700 Ω max.)  
G: 0 – 1 mA DC (Load resistance 7000 Ω max.)  
Z: Specify current (See OUTPUT SPECIFICATIONS)  
Voltage  
MODEL: WJV–[1][2][3]–[4][5]  
ORDERING INFORMATION  
• Code number: WJV-[1][2][3]-[4][5]  
Specify a code from below for each of [1] through [5].  
(e.g. WJV-6AA-B/Q)  
• Special input and output ranges (For codes U1, U2, U3, Z  
& 0)  
• Specify the specification for option code /Q  
(e.g. /C01/S01)  
Same range availability as Output 1  
Note: When the user requires a current and a voltage  
output, specify the current to be the Output 1 which allows  
a greater load.  
[4] POWER INPUT  
AC Power  
B: 100 V AC  
C: 110 V AC  
D: 115 V AC  
F: 120 V AC  
G: 200 V AC  
H: 220 V AC  
J: 240 V AC  
[1] INPUT  
Current  
A: 4 – 20 mA DC (Input resistance 250 Ω)  
H: 10 – 50 mA DC (Input resistance 100 Ω)  
Voltage  
6: 1 – 5 V DC (Input resistance 1 MΩ min.)  
U1: Range ±100 mV;  
DC Power  
S: 12 V DC  
(Minimum span 3 mV, Input resistance 20 kΩ min.)  
U2: Range ±1000 mV;  
R: 24 V DC  
V: 48 V DC  
(Minimum span 30 mV, Input resistance 20 kΩ min.)  
U3: Range ±10 V;  
WJV SPECIFICATIONS  
ES-2262 Rev.6 Page 1/4  
http://www.m-system.co.jp/  
MODEL: WJV  
[5] OPTIONS  
OUTPUT SPECIFICATIONS  
blank: none  
■ DC Current: 0 – 20 mA DC  
/Q: With options (specify the specification)  
Minimum span: 1 mA  
Offset: Max. 1.5 times span  
Load resistance: Output drive 12 V max. for Output 1;  
7 V max. for Output 2  
SPECIFICATIONS OF OPTION: Q (multiple selections)  
COATING (For the detail, refer to M-System's web site.)  
/C01: Silicone coating  
DC Voltage: -10 – +10 V DC  
Minimum span: 5 mV  
/C02: Polyurethane coating  
Offset: Max. 1.5 times span  
/C03: Rubber coating  
Load resistance: Output drive 1 mA max.; at ≥ 0.5 V  
TERMINAL SCREW MATERIAL  
/S01: Stainless steel  
INSTALLATION  
Power input  
RELATED PRODUCTS  
• Programming Unit (model: PU-2x)  
AC: Operational voltage range: rating ±10 %,  
50/60 ±2 Hz, approx. 3.5 VA  
• PC configurator software (model: JXCON)  
Downloadable at M-System’s web site.  
A dedicated cable is required to connect the module to the  
PC. Please refer to the internet software download site or  
the users manual for the PC configurator for applicable  
cable types.  
DC: Operational voltage range: rating ±10 %  
ripple 10 %p-p max., approx. 2.6 W (110 mA at 24 V)  
Operating temperature: -5 to +55°C (23 to 131°F)  
Operating humidity: 30 to 90 %RH (non-condensing)  
Mounting: Surface or DIN rail  
Weight: 400 g (0.88 lb)  
GENERAL SPECIFICATIONS  
Construction: Plug-in  
PERFORMANCE in percentage of span  
Accuracy: ±0.1 %  
Connection: M3.5 screw terminals  
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)  
Response time: ≤ 0.5 sec. (0 – 90 %)  
Screw terminal: Chromated steel (standard) or stainless  
steel  
Line voltage effect: ±0.1 % over voltage range  
Insulation resistance: ≥ 100 MΩ with 500 V DC  
Dielectric strength: 2000 V AC @1 minute  
(input to output to power to ground)  
Housing material: Flame-resistant resin (black)  
Isolation: Input to output 1 to output 2 to power  
Overrange output: Approx. -10 to +120 % at 1 – 5 V  
Zero adjustment: -5 to +5 % (front)  
1000 V AC @ 1 minute (output 1 to output 2)  
Span adjustment: 95 to 105 % (front)  
Adjustable individually for each output 1 and output 2.  
Adjustments: Programming Unit (model: PU-2x); Input  
range, zero and span, simulating output, etc.  
(Input range can be changed with Codes U1, U2 or U3 and  
limited within ranges of each code type.)  
(Refer to the users manual of JXCON for the adjustments  
configurable with JXCON.)  
INPUT SPECIFICATIONS  
DC Current:  
Shunt resistor attached to the input terminals (0.5 W)  
DC Voltage: -10 – +10 V DC  
Minimum span: 3 mV  
Offset: Max. 3 times span  
Default setting will be used if not otherwise specified.  
U1: 0 – 100 mV DC  
U2: 0 – 1 V DC  
U3: 0 – 10 V DC  
WJV SPECIFICATIONS  
ES-2262 Rev.6 Page 2/4  
http://www.m-system.co.jp/  
MODEL: WJV  
EXTERNAL DIMENSIONS unit: mm (inch)  
CLAMP  
(top & bottom)  
7.8 (.31)  
DIN RAIL  
35mm wide  
8
7
6
5
4
2–  
4.5 (.18) dia.  
MTG HOLE  
25 (.98) deep  
9
3
2
10 11  
1
11  
M3.5  
SCREW  
50 (1.97)  
107 (4.21)  
136 (5.35)  
40 (1.57)  
50 (1.97)  
[3.3 (.13)]  
• When mounting, no extra space is needed between units.  
TERMINAL ASSIGNMENTS unit: mm (inch)  
INPUT RESISTOR  
(model: REM)  
8
7
6
5
4
9
3
2
10 11  
1
Input shunt resistor attached  
for current input.  
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM  
Z
S
Isolation  
Low Drift  
Amplifier  
Digital  
Computation  
Output  
Driver  
+
5
6
4
3
9
1
2
+
*
INPUT  
R
OUTPUT 1  
Z
S
Output  
Driver  
10 +  
11 –  
OUTPUT 2  
POWER  
7
8
U(+)  
V(–)  
MODULAR JACK  
PU-2x  
SERIAL TRANSMISSION LINE  
Base Socket  
*Input shunt resistor attached for current input.  
WJV SPECIFICATIONS  
ES-2262 Rev.6 Page 3/4  
http://www.m-system.co.jp/  
MODEL: WJV  
Specifications are subject to change without notice.  
WJV SPECIFICATIONS  
ES-2262 Rev.6 Page 4/4  
http://www.m-system.co.jp/  

WJV-AA1-V 相关器件

型号 制造商 描述 价格 文档
WJV-AA1-V/Q MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格
WJV-AA2-B MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格
WJV-AA2-B/Q MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格
WJV-AA2-C MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格
WJV-AA2-C/Q MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格
WJV-AA2-D MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格
WJV-AA2-D/Q MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格
WJV-AA2-J MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格
WJV-AA2-J/Q MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格
WJV-AA2-R MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT 获取价格

WJV-AA1-V 相关文章

  • HARTING(浩亭)圆形连接器产品选型手册
    2024-10-31
    6
  • HYCON(宏康科技)产品选型手册
    2024-10-31
    6
  • GREEGOO整流二极管和晶闸管产品选型手册
    2024-10-31
    7
  • 西门子豪掷106亿美元,战略收购工程软件巨头Altair
    2024-10-31
    8