WL40MW1F-R [MSYSTEM]

Wireless I/O WL40F Series;


型号：	WL40MW1F-R
厂家：	M-SYSTEM
描述：	Wireless I/O WL40F Series 无线
文件：	总7页 (文件大小：678K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: WL40MW1F

Wireless I/O WL40F Series

FUNCTIONS & FEATURES

This unit

• Incorporates 900MHz band wireless module.

• Works as a gateway between wireless and RS-485 using

Modbus-RTU protocol.

WIRELESS GATEWAY

(Modbus-RTU Transparent 900MHz Band Wireless Device

(child device))

• Incorporates the module compliant with FCC Part 15, and

can be used only in the United States.

60 (2.36)

RELATED PRODUCTS

For related products of wireless device, refer to M-System's

[260

(10.24)]

web site.

• PC configurator software (model: W920FCFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the unit to the PC.

Please refer to the internet software download site or the

users manual for the PC configurator software for applicable

cable types.

155 (6.10)

mm (inch)

Maintenance software

Maintenance console: MH920 Console International (model:

MH920CI) (OKI)

MODEL: WL40MW1F–[1][2]

(Maintenance software is downloadable at M-System’s web

site.)

ORDERING INFORMATION

• Code number: WL40MW1F-[1][2]

Specify a code from below for each [1] and [2].

(e.g. WL40MW1F-R/E/Q)

Coaxial cable

• 7.5 m extension cable for rooftop antenna (model: CX-

SAC0SAD0Q0750) (OKI)

Using 7.5 m coaxial cable for extension decreases

transmission distance.

• Specify the specification for option code /Q

(e.g. /C01)

PACKAGE INCLUDES...

• Terminating resistor (110 Ω, 0.25 W)

[1] POWER INPUT

DC Power

S: 12 V DC

(Operational voltage range 12 V ±10 %, ripple 10 %p-p max.)

R: 24 V DC

GENERAL SPECIFICATIONS

Connection

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

Wireless network: SMA coaxial connector

RS-485: Tension clamp (Front Twinconnection)

Applicable wire size: 0.2 - 1.5 mm

Power supply: Tension clamp (Front Twinconnection)

Applicable wire size: 0.2 - 2.5 mm , stripped length 10 mm

, stripped length 10 mm

[2] OPTIONS (multiple selections)

Antenna

/S: Sleeve antenna

Maintenance: Mini USB type B female connector

Isolation: Power input to Modbus to FE1 to antenna

connector

/E: Rooftop antenna

Other Options

blank: none

Indicator LED: Power

/Q: Option other than the above (specify the specification)

MODBUS COMMUNICATION

Protocol: Modbus-RTU

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

Configuration: Bus type multi-drop

Standard: Conforms to TIA/EIA-485-A

/C02: Polyurethane coating

Communication: Half-duplex, asynchronous, no procedure

Transmission distance: 500 meters max.

Transmission media: Shielded twisted-pair cable (CPEV-S

/C03: Rubber coating

WL40MW1F SPECIFICATIONS

ES-9081 Rev.1 Page 1/7

http://www.m-system.co.jp/

MODEL: WL40MW1F

0.9 dia.)

(power input to Modbus to FE1 to antenna connector)

Status indicator LED: ERR, RD, SD

Max. no. of connections at once: 31

Transmission setting: PC configurator software

Data: RTU (Binary)

STANDARDS & APPROVALS

Module conforming to FCC Part 15 incorporated

Baud rate: 4800, 9600, 19.2k, 38.4 k (bps)

Parity: None, even or odd

Stop bit: 1 or 2

WIRELESS SPECIFICATIONS

Communication Standard: IEEE802.15.4g

Frequency: 900MHz band (902 - 928 MHz)

Max. Tx power: 20mW

Bandwidth: 400 kHz

Modulation: GFSK

Baud rate: Max. 100 kbps

Channel: 1 - 43ch

Security: 128bit AES

Indicator LEDs: 920Run, 920Link, 920ERR

Protocol: Modbus-RTU

Communication module: Router module incorporated (OKI)

Radio configuration: Configurator software

Antenna

• Sleeve antenna (model: MH920-ANT-F (S))

Indoor

Non-waterproof

Non-directional

Gain: 3.0dBi max.

• Rooftop antenna (model: MH920-ANT-F (R))

Outdoor/indoor

Cable length: 2.5 m

Waterproof performance; IPx6 (except connector)

Non-directional

Gain: 2.0dBi max.

INSTALLATION

Current consumption:

24 V DC: ≤ 70 mA

12 V DC: ≤130 mA

Operating temperature: -20 to +60°C (-4 to +140°F)

Operating humidity: 10 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: DIN rail

Weight

Unit: Approx. 260 g (0.57 lb)

Sleeve antenna (standard): 27 g (0.95 oz)

Rooftop antenna: 52 g (1.83 oz)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute

WL40MW1F SPECIFICATIONS

ES-9081 Rev.1 Page 2/7

http://www.m-system.co.jp/

MODEL: WL40MW1F

CONFIGURATOR SOFTWARE SETTING

With configurator software, settings shown below are available.

Refer to the users manual of W920FCFG for detailed operation.

■ WIRELESS SETTING

ITEM

SETTING RANGE

DEFAULT

0000

Preferred PAN ID (group number)

Radio channel number

Short address

0000 – FFFE (hexadecimal, 4 digits)

1 – 43 (selectable up to 10 channels)

0000 – FFFD (hexadecimal, 4 digits)

None

0000

Network name

English one-byte characters within 16 characters

(one-byte space, “-”, “_”, “.”, “@” are usable.)

Blank

Encryption key

0000...0 – FFFF...F

(hexadecimal, 32 digits)

0000...0

Transmitter power output

Low-speed moving mode

0.16mW / 1mW / 20mW

No / Yes

20mW

Device type in a network,

Number of devices in a network

Child (xed), 1 to 30 devices /

Child (xed), 31 to 60 devices /

Child (xed), 61 to 100 devices /

Child (xed) + child (moving)

Child (xed), 1 to 30 devices

Set network quality

Standard (recommended) /

Frequency of route switching and delay (higher) /

Frequency of route switching and delay (highest)

Standard (recommended)

Network join mode

Fixed route

V3-compatible mode / Fast join mode

No / Yes

V3-compatible mode

Destination short address

Temporary detour

0000 – FFFD (hexadecimal, 4 digits)

No / Yes

0000

Yes

Packet ltering

None / Yes (polling type)

1.0 – 60.0 (sec.)

Yes (polling type)

1.0 (sec.)

3.0 (sec.)

Three times

Filter timeout on polling

920Run timeout

1.0 – 60.0 (sec.)

Retry times before route switching

Once / Twice / Three times

Note: For version con rmation of communication module, refer to the users manual of W920FCFG.

■ MODBUS SETTING

ITEM

SETTING RANGE

38400 / 19200 / 9600 / 4800 bps

Odd / Even / None

1 bit / 2 bits

DEFAULT

38400 bps

Odd

Transfer rate

Parity bit

Stop bit

1 bit

EXTERNAL VIEW

■ FRONT VIEW

Status Indicator LED

Antenna Connector

Power

920Link

920Run

920ERR

ERR

Status Indicator LED

Maintenance Connector

Configuration Jack

CFG2

SLD

CFG1

Connector for

RS-485 Communication

24V

FE1

Connector for Power Input *

* Power input defers depending on the power input code you select.

WL40MW1F SPECIFICATIONS

ES-9081 Rev.1 Page 3/7

http://www.m-system.co.jp/

MODEL: WL40MW1F

COMMUNICATION CABLE CONNECTIONS

■ WIRING CONNECTION WITH SLAVE DEVICES

WL40MW1F

REMOTE UNIT

TERMINATOR

SLD

* Connect SLD and FE for reducing noise interference if necessary.

Note: Be sure to connect the terminating resistor included in the product package to the unit

at both ends of communication line.

The terminator must be connected across “DA” and “DB”.

TERMINAL ASSIGNMENTS

■ CONNECTORS FOR POWER INPUT

Unit side connector: MSTBV2,5/5-GF-5,08AU (Phoenix Contact)

Cable side connector: TFKC2,5/5-STF-5,08AU (Phoenix Contact)

• Power input code: R (24 V DC)

• Power input code: S (12 V DC)

24V

FUNCTION

12V

FUNCTION

Power input 24 V

Power input 0 V

Not used

Power input 12 V

Power input 0 V

Not used

24V

12V

FE1

Not used

Power input earth

■ CONNECTOR FOR RS-485 COMMUNICATION

Unit side connector: MC1,5/5-GF-3,5 (Phoenix Contact)

Cable side connector: TFMC1,5/5-STF-3,5 (Phoenix Contact)

FUNCTION

SLD

Shield

Functional earth

WL40MW1F SPECIFICATIONS

ES-9081 Rev.1 Page 4/7

http://www.m-system.co.jp/

MODEL: WL40MW1F

MODBUS FUNCTION CODES & SUPPORTED CODES

Modbus function codes are shown below.

■ DATA AND CONTROL FUNCTION

CODE NAME

Read Coil Status

Digital output from the slave (read/write)

Read Input Status

Read Holding Registers

Read Input Registers

Force Single Coil

Status of digital inputs to the slave (read only)

General purpose register within the slave (read/write)

Collected data from the !eld by the slave (read only)

Digital output from the slave (read/write)

Preset Single Register

Diagnostics

General purpose register within the slave (read/write)

Force Multiple Coils

Preset Multiple Registers

Digital output from the slave (read/write)

General purpose register within the slave (read/write)

■ EXCEPTION CODE

CODE NAME

Illegal Function

Function code is not allowable for the slave

Address is not available within the slave

Data is not valid for the function

Illegal Data Address

Illegal Data Value

Slave Device Failure

Acknowledge

Slave Device Busy

Negative Acknowledge

WL40MW1F SPECIFICATIONS

ES-9081 Rev.1 Page 5/7

http://www.m-system.co.jp/

MODEL: WL40MW1F

EXTERNAL DIMENSIONS unit: mm (inch)

• With sleeve antenna

DIN RAIL

35mm wide

60 (2.36)

45 (1.77)

107 (4.21)

3 (.12)

[200 (7.87)]

• With rooftop antenna

ø3 (.12)

ø1.2 (.05)

8 (.31) Hex.

DIN RAIL

35mm wide

ø27

approx. 2500 (98.4)

(1.06)

107 (4.21)

(.79)

3 (.12)

WL40MW1F SPECIFICATIONS

ES-9081 Rev.1 Page 6/7

http://www.m-system.co.jp/

MODEL: WL40MW1F

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

LED

Two-way

Antenna Connector

wireless circuit

Isolation

SLD

To Other

Modbus Devices

Maintenance Connector USB Connector

Configuration Jack

Jack

Control

Circuit

24V*

Power Input

FE1

* Power input defers depending on the power input code you select.

SYSTEM CONFIGURATION EXAMPLES

PC side as Modbus/Master communicates with child devices via wireless module using Modbus/TCP and RTU protocol,

and also communicates with slave devices in multi drop connection (RS-485).

LAN cable

(STP cable)

RS-485

Slave Device

MAX. 31

Slave Device

Wireless gateway

(model: WL40MW1F)

Modbus/Master

Wireless gateway

(model: WL40EW2F)

Specifications are subject to change without notice.

WL40MW1F SPECIFICATIONS

ES-9081 Rev.1 Page 7/7

http://www.m-system.co.jp/

WL40MW1F-R [MSYSTEM]

相关型号：

WL40MW1F-R/E

WL40MW1F-R/Q

WL40MW1F-R/S

WL40MW1F-S

WL40MW1F-S/E

WL40MW1F-S/Q

WL40MW1F-S/S

WL40MW1KR

WL40MW1KR-R

WL40MW1KR-R/E

WL40MW1KR-R/Q

WL40MW1KR-R/S