WL40W1F-DS2 [MSYSTEM]
Wireless I/O WL40F Series;型号: | WL40W1F-DS2 |
厂家: | M-SYSTEM |
描述: | Wireless I/O WL40F Series 无线 |
文件: | 总7页 (文件大小:574K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: WL40W1F-DS2
Wireless I/O WL40F Series
FUNCTIONS & FEATURES
This unit
• Operates as a 900MHz band wireless device.
• Incorporates the module compliant with FCC Part 15, and
can be used only in the United States.
• Connects inputs by wireless communication using Modbus
-RTU protocol.
WIRELESS INPUT UNIT
Modbus-RTU Transparent 900MHz Band Wireless Device
(Child Device), Built-in I/O, 2-wire Transmitter Inputs 2
points)
RELATED PRODUCTS
60 (2.36)
For related products of wireless device, refer to M-System's
web site.
[260
(10.24)]
• PC configurator software (model: W920FCFG)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the unit to the PC.
Please refer to the internet software download site or the
users manual for the PC configurator software for applicable
cable types.
155 (6.10)
mm (inch)
Maintenance software
Maintenance console: MH920 Console International (model:
MH920CI) (OKI)
MODEL: WL40W1F-DS2-R[1]
(Maintenance software is downloadable at M-System’s web
site.)
Coaxial cable
ORDERING INFORMATION
• Code number: WL40W1F-DS2-R[1]
Specify a code from below for [1].
(e.g. WL40W1F-DS2-R/E/Q)
• 7.5 m extension cable for rooftop antenna (model: CX-
SAC0SAD0Q0750) (OKI)
Using 7.5 m coaxial cable for extension decreases
transmission distance.
• Specify the specification for option code /Q
(e.g. /C01)
GENERAL SPECIFICATIONS
Connection
I/O TYPE
Wireless network: SMA coaxial connector
Power supply: Tension clamp (Front Twinconnection)
DS2: 2 2-wire transmitter inputs
Applicable wire size: 0.2 - 2.5 mm
Input: Separable tension clamp terminal
Applicable wire size: 0.2 - 1.5 mm , stripped length 10 mm
2
, stripped length 10 mm
POWER INPUT
DC Power
2
R: 24 V DC
Maintenance: Mini USB type B female connector
Isolation: Power input to FE1 to Input 1 to Input 2 to antenna
connector
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Indicator LED: Power
[1] OPTIONS (multiple selections)
Antenna
/S: Sleeve antenna
WIRELESS SPECIFICATIONS
Communication Standard: IEEE 802.15.4g
Frequency: 900MHz band (902 - 928 MHz)
Max. Transmission power: 20mW
Bandwidth: 400 kHz
/E: Rooftop antenna
Other Options
blank: none
/Q: Option other than the above (specify the specification)
Modulation: GFSK
Baud rate: Max. 100 kbps
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
Channels: 1 to 43ch
Security: 128bit AES
Indicator LEDs: 920Run, 920Link, 920ERR
Protocol: Modbus-RTU
/C02: Polyurethane coating
/C03: Rubber coating
WL40W1F SPECIFICATIONS
ES-9084 Rev.0 Page 1/7
http://www.m-system.co.jp/
MODEL: WL40W1F-DS2
Communication module: Coordinator module incorporated
(Oki Electric Industry Co., Ltd. )
Radio parameters setting: Configurator software
Antenna
connector)
STANDARDS & APPROVALS
Module conforming to FCC Part 15 incorporated
•Sleeve antenna (Model: MH920-ANT-F (S))
Indoor use
Non-waterproof
Non-directional
Gain: 3.0dBi max.
•Rooftop antenna (Model: MH920-ANT-F (R))
Outdoor/indoor use
Cable length: 2.5 m
Waterproof performance: IPx6 (except connector)
Non-directional
Gain: 2.0dBi max.
SUPPLY OUTPUT
(across the terminals 1 – 2)
Output voltage: 24 – 28 V DC with no load
19 V DC min. at 20 mA
Current rating: ≤ 22 mA DC
∙Shortcircuit Protection
Current limited: Approx. 30 mA
Protected time duration: No limit
INPUT SPECIFICATIONS
Input setting: Configurator software
No. of input channel: 2
Input resistance: 250 Ω resistor incorporated
DC Current: 4 – 20 mA DC
Conversion rate: 40 msec.
INSTALLATION
Current consumption: ≤ 140 mA
Operating temperature: -10 to +55°C (14 to 131°F)
Storage temperature: -10 to +55°C (14 to +131°F)
Operating humidity: 10 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: DIN rail
Weight
Unit: Approx. 270 g (0.60 lb)
Sleeve antenna (standard): 27 g (0.95 oz)
Rooftop antenna: 52 g (1.83 oz)
PERFORMANCE
Conversion accuracy: ±0.05 %
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(power input to FE1 to input 1 to input 2 to antenna
WL40W1F SPECIFICATIONS
ES-9084 Rev.0 Page 2/7
http://www.m-system.co.jp/
MODEL: WL40W1F-DS2
CONFIGURATOR SOFTWARE SETTING
With configurator software, settings shown below are available.
Refer to the users manual of W920FCFG for detailed operation.
■ WIRELESS SETTING
ITEM
Preferred PAN ID (group number)
Radio channel number
Short address
SETTING RANGE
DEFAULT
0000 – FFFE (hexadecimal, 4 digits)
1 – 43 (selectable up to 10 channels)
0000 – FFFD (hexadecimal, 4 digits)
0000
None
0000
Blank
Network name
English one-byte characters within 16 characters
(one-byte space, “-”, “_”, “.”, “@” are usable.)
Encryption key
0000...0 – FFFF...F
(hexadecimal, 32 digits)
0000...0
Transmitter power output
Low-speed moving mode
0.16mW / 1mW / 20mW
No / Yes
20mW
No
Device type in a network,
Number of devices in a network
Child (xed), 1 to 30 devices /
Child (xed), 31 to 60 devices /
Child (xed), 61 to 100 devices /
Child (xed) + child (moving)
Child (xed), 1 to 30
devices
Set network quality
Standard (recommended) /
Frequency of route switching and delay (higher) /
Frequency of route switching and delay (highest)
Standard (recommended)
Network join mode
Fixed route
V3-compatible mode / Fast join mode
No / Yes
V3-compatible mode
No
Destination short address
Temporary detour
0000 – FFFD (hexadecimal, 4 digits)
No / Yes
0000
Yes
Packet ltering
None / Yes (polling type)
1.0 – 60.0 (sec.)
Yes (polling type)
1.0 (sec.)
3.0 (sec.)
1
Filter timeout on polling
920Run timeout
1.0 – 60.0 (sec.)
Modbus node address
Retry times before route switching
1 – 247
Once / Twice / Three times
Three times
* For version confi rmation of communication module, refer to the users manual of W920FCFG.
■ INPUT SETTING
CHANNEL
ITEM
Input enabled / disabled
Zero input value
SETTING RANGE
Enabled / Disabled
DEFAULT
Analog input 1
Enabled
4.000 – 20.000
4.000 (mA)
Full input value
4.000 – 20.000
(full input value > zero input value)
20.000 (mA)
Fine zero adjustment
Fine gain adjustment
Zero scaling value
-5.00 – +5.00 (%)
0.9500 – 1.0500
-32000 – +32000
-32000 – +32000
0.0 – 60.0 (sec.)
Enabled / Disabled
4.000 – 20.000
0.00 (%)
1.0000
0
Full scaling value
10000
First-order !lter time constant
Input enabled / disabled
Zero input value
0.0 (sec.)
Enabled
4.000 (mA)
20.000 (mA)
Analog input 2
Full input value
4.000 – 20.000
(full input value > zero input value)
Fine zero adjustment
Fine gain adjustment
Zero scaling value
-5.00 – +5.00 (%)
0.9500 – 1.0500
-32000 – +32000
-32000 – +32000
0.0 – 60.0 (sec.)
0.00 (%)
1.0000
0
Full scaling value
10000
0.0 (sec.)
First-order !lter time constant
WL40W1F SPECIFICATIONS
ES-9084 Rev.0 Page 3/7
http://www.m-system.co.jp/
MODEL: WL40W1F-DS2
EXTERNAL VIEW
■ FRONT VIEW
Antenna Connector
Status Indicator LED
Power
920Link
920Run
920ERR
Maintenance Connector
Configuration Jack
CFG2
24V1
AI1A
AI1B
0V1
CFG1
NC
Input Connector 1
Input Connector 2
24V
0V
24V2
AI2A
AI2B
0V2
NC
NC
FE1
NC
Connector for Power Input
TERMINAL ASSIGNMENTS
■ CONNECTOR FOR POWER INPUT
Unit side connector: MSTBV2,5/5-GF-5,08AU (Phoenix Contact)
Cable side connector: TFKC2,5/5-STF-5,08AU (Phoenix Contact)
ID
FUNCTION
24 V Power input 24 V
24V
0V
0 V
NC
Power input 0 V
Not used
NC
NC
FE1
NC
Not used
FE1
Power input earth
■ INPUT CONNECTOR 1
Unit side connect: MC1,5/5-GF-3,5 (Phoenix Contact)
Cable side connector: FMC1,5/5-STF-3,5 (Phoenix Contact)
ID
FUNCTION
24V1 2-wire transmitter 1 +
AI1A 2-wire transmitter 1 –
AI1B Current input 1 +
24V1
AI1A
AI1B
0V1
NC
0V1
NC
Current input 1 –
Not used
■ INPUT CONNECTOR 2
Unit side connect: MC1,5/5-GF-3,5 (Phoenix Contact)
Cable side connector: FMC1,5/5-STF-3,5 (Phoenix Contact)
ID
FUNCTION
24V2 2-wire transmitter 2 +
AI2A 2-wire transmitter 2 –
AI2B Current input 2 +
24V2
AI2A
AI2B
0V2
NC
0V2
NC
Current input 2 –
Not used
WL40W1F SPECIFICATIONS
ES-9084 Rev.0 Page 4/7
http://www.m-system.co.jp/
MODEL: WL40W1F-DS2
MODBUS FUNCTION CODES & SUPPORTED CODES
Modbus function codes are shown below.
■ DATA AND CONTROL FUNCTION
CODE NAME
01
02
03
04
05
06
15
16
Read Coil Status
Digital output from the slave (read / write)
Status of digital inputs to the slave read only
Read Input Status
(
)
Read Holding Registers
Read Input Registers
Force Single Coil
General purpose register within the slave read / write
(
)
Collected data from the !eld by the slave read only
(
)
Digital output from the slave read / write
(
)
Preset Single Registers
Force Multiple Coils
Preset Multiple Registers
General purpose register within the slave read / write
(
)
Digital output from the slave read / write
(
)
General purpose register within the slave read / write
(
)
■ EXCEPTION CODE
CODE NAME
01
02
03
04
05
06
07
Illegal Function
Function code is not allowable for the slave
Address is not available within the slave
Data is not valid for the function
Illegal Data Address
Illegal Data Value
Slave Device Failure
Acknowledge
Slave Device Busy
Negative Acknowledge
MODBUS I/O ASSIGNMENT
ADDRESS
DATA TYPE
DATA
Coil (0X)
1 – 16
1 – 8
9
Reserved (unused)
Reserved (unused)
Input (1X)
Analog input error (input range error of analog input 1)
Analog input error (input range error of analog input 2)
Reserved (unused)
10
11 – 16
1
Input Register (3X)
I
I
Analog Input (analog input 1)
Analog Input (analog input 2)
Reserved (unused)
2
3 – 16
1 – 16
–
–
Holding Register (4X)
Reserved (unused)
Note: DO NOT access addresses other than mentioned above. Such access may cause problems such as inadequate operation.
■ DATA TYPE
I: Integer -32768 – +32767
■ STATUS
1 bit: indicates input status.
Input range error (Input range is out of the range -5 to +105% for scaling setting, or out of the range -32768 to +32767.)
0: Normal
1: Error
INPUT DATA DESCRIPTIONS
■ANALOG DATA (16 BITS)
15
0
When the scaling setting is initial value, the data is 0 to 10000 for input 0 to 100% setting.
If the input range is -5 to +105% (-500 to +10500) and that is out of range, the data is fixed to -500 or 10500.
Minus value is converted into negative values, represented in 2’s complements.
WL40W1F SPECIFICATIONS
ES-9084 Rev.0 Page 5/7
http://www.m-system.co.jp/
MODEL: WL40W1F-DS2
■DATA ERROR STATUS (1 BIT)
Data error status is indicated by 1 bit.
ꢀ0: OFF
ꢀ1: ON
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
● WITH SLEEVE ANTENNA
DIN RAIL
35mm wide
60 (2.36)
45 (1.77)
107 (4.21)
3 (.12)
[200 (7.87)]
● WITH ROOFTOP ANTENNA
3 (0.12) dia.
1.2 (.05) dia.
8 (.31) Hex.
DIN RAIL
35mm wide
27 dia.
(1.06)
approx. 2500 (98.4)
20
(.79)
107 (4.21)
3(.12)
WL40W1F SPECIFICATIONS
ES-9084 Rev.0 Page 6/7
http://www.m-system.co.jp/
MODEL: WL40W1F-DS2
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
LED
Two-way
Antenna Connector
Wireless Circuit
24V
Power Input
0V
NC
NC
FE1
USB Connector
Jack
Maintenance Connector
Configuration Jack
INPUT 1
Excitation
Supply
24V1
2-WIRE TRANSMITTER
AI1A
AI1B
0V1
NC
Input Circuit
Control
Circuit
INPUT (CURRENT INPUT)
250Ω
INPUT 2
Excitation
Supply
24V2
AI2A
AI2B
0V2
2-WIRE TRANSMITTER
Input Circuit
INPUT (CURRENT INPUT)
250Ω
NC
■ HANDLING OF THE UNUSED INPUT
ꢀ
Connect 5 kΩ (0.5 W) terminating resistor to the input terminal which is not used, as shown below.
24Vn
5 kΩ (0.5 W)
AInA
If the above step is not performed, input becomes -5% or less, and PLC and such show data error.
However, using PC configuration software (model: W920FCFG) enables the setting of the unused
input without the above step.
Specifications are subject to change without notice.
WL40W1F SPECIFICATIONS
ES-9084 Rev.0 Page 7/7
http://www.m-system.co.jp/
相关型号:
WL40W1F-DS2-R
Wireless I/O WL40F SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
WL40W1F-DS2-R/E
Wireless I/O WL40F SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
WL40W1F-DS2-R/Q
Wireless I/O WL40F SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
WL40W1F-DS2-R/S
Wireless I/O WL40F SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
WL4532V
SMD POWER INDUCTOR-RoHSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FENGJUI
WL4532V-100
SMD POWER INDUCTOR-RoHSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FENGJUI
WL4532V-101
SMD POWER INDUCTOR-RoHSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FENGJUI
WL4532V-102
SMD POWER INDUCTOR-RoHSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FENGJUI
WL4532V-120
SMD POWER INDUCTOR-RoHSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FENGJUI
WL4532V-121
SMD POWER INDUCTOR-RoHSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FENGJUI
WL4532V-150
SMD POWER INDUCTOR-RoHSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FENGJUI
WL4532V-151
SMD POWER INDUCTOR-RoHSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FENGJUI
©2020 ICPDF网 联系我们和版权申明