M165FCNXX.XXXXMHZ [MTRONPTI]
Quartz Crystal,;M1 Series 5.0 X 7.0 X 1.75 mm HCMOS/TTL
Compatible 5.0 Volt Surface Mount Oscillators
Low Profile, High Performance HCMOS/TTL
Compatible 5.0 Volt Surface Mount Oscillators
Electrical Specifications
NOTE: A capacitor of value 0.01 µF or
greater between Vdd and Ground
is recommended.
Pin Connections
1 Because this product is based on AT-strip technology, not all frequencies in the range stated are available.
Contact the factory for availability of specific frequencies.
2 TTL load - See load circuit diagram #1 on page 113. HCMOS load - See load circuit diagram #2 on page 113.
3 Symmetry is measured at 1.4 V with TTL load, and at 50% Vdd with HCMOS load.
4 Rise/Fall times are measured between 0.5 V and 2.4 V with TTL load, and between 10% Vdd and 90% Vdd with HCMOS load.
See page 112, Figure “2” for suggested solder profile.
Tri-state Control Logic
Pin 1 high or floating: clock signal output.
Pin 1 low: output disabled to high impedance.
59
相关型号:
M165FGN125.0000MHZ
HCMOS/TTL Output Clock Oscillator, 50.001MHz Min, 125MHz Max, 125MHz Nom,
MTRONPTI
M165FGN50.0010MHZ
HCMOS/TTL Output Clock Oscillator, 50.001MHz Min, 125MHz Max, 50.001MHz Nom,
MTRONPTI
M165FGNFREQ1
HCMOS Output Clock Oscillator, 50.001MHz Min, 67MHz Max, ROHS COMPLIANT, CERAMIC, LEADLESS PACKAGE-4
MTRONPTI
©2020 ICPDF网 联系我们和版权申明