M3R13TCJXX.XXXXMHZ [MTRONPTI]
Quartz Crystal;M3R Series 3.3 Volt HCMOS/TTL
Compatible Oscillators
M3R Series HCMOS/TTL Compatible, 3.3 Volt,
Plastic Package, Surface Mount Oscillator
* Consult factory regarding availability of C symmetry code.
Available Stabilities
vs. Temperature
A = Available
S = Standard
C = Consult Factory
Electrical Specifications
NOTE: A capacitor of value 0.01 mF or greater between
Vdd and Ground is recommended.
Pin Connections
Tri-state Control Logic
Pin 1 high or floating: clock signal output.
Pin 1 low: output disabled to high impedance.
1 Because this product is based on AT-strip technology, not all frequencies in the range stated are
available. Contact the factory for availability of specific frequencies.
2 See load circuit diagram #2 on page 137.
3 Symmetry is measured at 50% Vdd.
4
Rise/Fall times are measured between 10% Vdd and 90% Vdd.
See page 136, Figure 2 for suggested solder profile.
TTL output drive capability is 2 TTL (10 LS - TTL).
70
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00298/img/page/M3R63TCJ01-0_1800663_files/M3R63TCJ01-0_1800663_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00298/img/page/M3R63TCJ01-0_1800663_files/M3R63TCJ01-0_1800663_2.jpg)
M3R14FAJ01.0000MHZ
HCMOS/TTL Output Clock Oscillator, 1MHz Min, 66.667MHz Max, 1MHz Nom, J LEADED PACKAGE-4
MTRONPTI
©2020 ICPDF网 联系我们和版权申明