M61806MFCN [MTRONPTI]
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO;型号: | M61806MFCN |
厂家: | MTRONPTI |
描述: | 3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO 石英晶振 压控振荡器 温度补偿晶振 有源晶体振荡电路 |
文件: | 总7页 (文件大小:1188K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
M618x Series
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave
Precision TCXO/TCVCXO
Product Features
•ꢀ Tight stability performance
(±0.2 ppm) over Industrial Temperatures (-40 °C to +85 °C)
(±0.1 ppm) over Commercial Temperatures (0 °C to 70 °C)
•ꢀ 3.0 V, 3.3 V and 5.0 V versions
•ꢀ Low phase noise performance
•ꢀ Tristate Function standard
Product Description
MtronPTI’s M618x Series TCXO’s and TCVCXO’s provide design engineers with low voltage, surface mount products
with extremely tight stability (down to ±0.10 ppm) over temperature and time. Specially processed crystals enable the
M618xꢀtoꢀachieveꢀconsistentꢀlong-termꢀstabilityꢀandꢀminimalꢀfrequencyꢀshiftꢀafterꢀreflow.ꢀꢀTheꢀlowꢀphaseꢀnoiseꢀ(-155ꢀdBc/
Hz at 100 kHz) makes the M618x ideal for the design engineer working on all types of systems as the reference timing
source.
Product Applications
The M618x Series is ideally suited for a wide range of applications such as GPS, military, avionics, test and measurement,
WLAN, WiMaxbasestations, pointtopoint/multi-pointradios, medicalequipment, frequencysynthesis, frequencytranslation
and land mobile radio. Standard output for the M618x series is HCMOS compatible or clipped sine wave. The product is
ideally suited for battery and remote applications where it draws as little as 1.5 mA of current with a 3.3 volt supply at 13
MHz.ꢀꢀThisꢀlowꢀpowerꢀconsumptionꢀprovidesꢀanꢀadvantageꢀoverꢀsimilarlyꢀspecifiedꢀovenizedꢀoscillatorsꢀforꢀpower-sensitiveꢀ
applications. The M618x series offers ±10 ppm minimum pull range with excellent tuning linearity performance for critical
PLL applications. This series is available in selective frequencies from 8 MHz to 52 MHz.
Product Ordering Information
M6180Sxxx, M6181Sxxx, M6182Sxxx - Contact factory for datasheets.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
Rev: 01/28/2013
M618x Series
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave
Precision TCXO/TCVCXO
Performance Characteristics
Parameter
Symbol
FO
Min.
8
Typ.
Max.
52
Units Conditions/Notes
MHz
°C
Frequency Range
Operating Temperature
Storage Temperature
Frequency Tolerance @ +25 °C
Frequency Stability
Stability vs. Reflow
Frequency vs. Supply
Frequency vs. Load
Aging (First Year)
Aging (First Year)
Aging (10 Year)
TA
(See Ordering Information)
TSTG
∆F/F
∆FT/F
-55
+125
+1.0
°C
-1.0
ppm
ppm
ppm
ppm
ppm
ppm
ppm
ppm
ppm
V
For TCXO only
(FMAX - FMIN)/2
(See Ordering Information)
-1.0
+1.0
±0.1
±0.1
+1.0
+2.0
+3.0
+5.0
∆FVDD/F
∆FLOAD/F
±0.02
±0.02
For ±5% supply voltage variation
For ±5% load variation
F0 ≤ 20 MHz
F0 > 20 MHz
F0 ≤ 20 MHz (includes first year)
F0 > 20 MHz (includes first year
±5% voltage tolerance
-1.0
-2.0
-3.0
-5.0
Aging (10 Year)
VDD
IDD
(See Ordering Information)
Supply Voltage
Supply Current
2.0
3.0
5.5
1.3
1.7
2.8
3.0
4.0
6.5
1.9
2.3
3.5
20
mA
HCMOS output at 13 MHz
HCMOS output at 26 MHz
HCMOS output at 52 MHz
Clipped Sine Wave output at 13 MHz
Clipped Sine Wave output at 26 MHz
Clipped Sine Wave output at 52 MHz
(Reference to VDD = 3.3 V)
mA
mA
mA
mA
mA
VOL
VOH
VOUT
VOUT
tDC
% VDD IOH/IOL = ±4 mA, VDD = +3.0 V
% VDD IOH/IOL = ±4 mA, VDD = +3.0 V
Output Logic Levels
(HCMOS)
80
1.0
0.8
40
Vpk-pk
Vpk-pk
%
F0 ≤ 40 MHz
F0 > 40 MHz
Output Level
(Clipped Sine Wave)
Symmetry (Duty Cycle)
Rise/Fall Time
Ref. to ½ VDD HCMOS Only
Ref. 10% to 90% HCMOS only
HCMOS Output
50
60
tR/tF
6.5
ns
15 pF
Output Load
10 kΩ || 10 pF
Clipped Sine Wave Output
Over Control Voltage Range
For VDD = 3.0 V
Frequency Adjustment
Control Voltage Range
-10
0.3
0.3
0.5
-50
100
+10
2.7
3.0
4.5
+50
ppm
V
1.50
1.65
2.50
For VDD = 3.3 V
V
For VDD = 5.0 V
V
Input Leakage Current
Input Resistance
Linearity
µA
kΩ
%
5
ModulationꢀBandwidth
Tristate Function
2 kHz
70
% VDD
% VDD
µA
Output enabled. Logic “1” or “Open”
Output disabled. Logic “0” or “GND”
30
Tristate Leakage Current
Phase Noise
-100
+100
-101
-130
-149
-155
-156
dBc/Hz @ 10 Hz Offset
dBc/Hz @ 100 Hz Offset
dBc/Hz @ 1 kHz Offset
dBc/Hz @ 10 kHz Offset
dBc/Hz @ 100 kHz Offset
(Typical 12.8 MHz HCMOS @ 3.3 V)
MIL-STD-202, Method 213, Condition C (100 g)
Shock
MIL-STD-202, Methods 201 & 204 (10 g from 10 Hz to 2000 Hz)
EIAJ-STD-002
Vibration
Solderability
Package
3.2 mm x 5.0 mm x 1.58 mm, SMT (RoHS Compliant)
See solder profile
Max Soldering Conditions
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
2
M618x Series
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave
Precision TCXO/TCVCXO
Phase Noise Plot
M618x 12.8 MHz Phase Noise
Output Waveform (HCMOS Output)
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
3
M618x Series
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave
Precision TCXO/TCVCXO
Product Dimension & Pinout Information
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
4
M618x Series
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave
Precision TCXO/TCVCXO
Handling Information
Although protection circuitry has been designed into the M618x oscillator, proper precautions should be taken to
avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body
modelꢀ(HBM)ꢀandꢀaꢀcharged-deviceꢀmodelꢀ(CDM)ꢀforꢀESD-susceptibilityꢀtestingꢀandꢀprotectionꢀdesignꢀevaluation.ꢀ
ESDꢀvoltageꢀthresholdsꢀareꢀdependentꢀonꢀtheꢀcircuitꢀparametersꢀusedꢀtoꢀdefineꢀtheꢀmode.ꢀꢀAlthoughꢀnoꢀindustry-
wideꢀstandardꢀhasꢀbeenꢀadoptedꢀforꢀtheꢀCDM,ꢀaꢀstandardꢀHBMꢀ(resistanceꢀ=ꢀ1500ꢀΩ, capacitance = 100 pF) is
widelyꢀusedꢀandꢀthereforeꢀcanꢀbeꢀusedꢀforꢀcomparisonꢀpurposes.ꢀꢀTheꢀHBMꢀESDꢀthresholdꢀpresentedꢀhereꢀwasꢀ
obtained using these circuit parameters.
Model
ESD Threshold, Minimum
Unit
V
ATTENTION
HumanꢀBody
Charged Device
1500*
1500*
Static Sensitive Devices
Handle only at Static
Safe Work Stations
V
* MIL-STD-833D, Method 3015, Class 1
Typical Test Circuits
Test Circuit - N Package
With Tristate
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
5
M618x Series
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave
Precision TCXO/TCVCXO
Tape & Reel Specifications
(all measurements
A
B
C
D
E
F
G
H
J
K
L
M
N
are in mm)
M618x
3.6
5.4
1.5
5.5
1.9
4
8
12
180
13
20.2
60
12
Standard Tape and Reel: 1000 parts per reel
Maximum Soldering Conditions
Note: Exceeding these limits may damage the device.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
6
M618x Series
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave
Precision TCXO/TCVCXO
Quality Parameters
Environmental Specifications/Qualification Testing Performed
Test
Test Method
Test Condition
Electrical Characteristics
InternalꢀSpecification
PerꢀSpecification
Frequency vs. Temperature
Mechanical Shock
Vibration
Thermal Cycle
Aging
Gross Leak
Fine Leak
Solderability
InternalꢀSpecification
PerꢀSpecification
100 g’s
10 g’s from 10-2000 Hz
-55 Deg. C to +125 Deg. C, 15 minute Dwell, 10 cycles
168 Hours at 105 Degrees C
30 Second Immersion
Must meet 1x10-8
8 Hour Steam Age – Must Exhibit 95% coverage
Three 1 minute soaks
PerꢀSpecification
PerꢀInternalꢀSpecification
MIL-STD-202, Method 213, C
MIL-STD-202, Method 201-204
MIL-STD-883,ꢀMethodꢀ1010,ꢀB
InternalꢀSpecification
MIL-STD-202, Method 112
MIL-STD-202, Method 112
MIL-STD-883, Method 2003
MIL-STD-883, Method 2015
MIL-STD-883, Method 2016
InternalꢀSpecification
Resistance to Solvents
Physical Dimensions
Internal Visual
Load Circuit
Load Circuit #7 - Clipped Sine Wave Output
Load Circuit #2 - HCMOS Output
DUT Output
Test Point
DUT Output
Test Point
C Load
10K Ohms
10 pF
Note:ꢀCꢀLoadꢀincludesꢀprobeꢀandꢀfixturing.
Forꢀcustomꢀproductsꢀorꢀadditionalꢀspecificationsꢀcontactꢀourꢀsalesꢀteamꢀat
800.762.8800 (toll free) or 605.665.9321
For more information on this product visit the MtronPTI website at
www.mtronpti.com
7
相关型号:
M61806MFSN
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO
MTRONPTI
M61806MTCN
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO
MTRONPTI
M61806MTSN
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO
MTRONPTI
M61806NFCN
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO
MTRONPTI
M61806NFSN
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO
MTRONPTI
M61806NTCN
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO
MTRONPTI
M61806NTSN
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO
MTRONPTI
M61806PFCN
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO
MTRONPTI
M61806PFSN
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO
MTRONPTI
M61806PTCN
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO
MTRONPTI
M61806PTSN
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO
MTRONPTI
M61806QFCN
3.2 x 5.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave Precision TCXO/TCVCXO
MTRONPTI
©2020 ICPDF网 联系我们和版权申明