CDSRH6M00CK030-B0 [MURATA]
Band Pass Filter, 6MHz;型号: | CDSRH6M00CK030-B0 |
厂家: | muRata |
描述: | Band Pass Filter, 6MHz LTE CD |
文件: | 总44页 (文件大小:827K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
CERAFILr(Filters/ Traps/ Discriminators) for TV/ VCR
CERAFILr
(FILTERS/ TRAPS
/ DISCRIMINATORS)
FOR TV/ VCR
Mu ra ta
Ma nu fa cturin g Co., Ltd .
Cat.No.P25E-3
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
1
2
CONTENTS
CERAFILr in this catalog are the trademarks of Murata Manufacturing Co., Ltd.
Part Numbering
2
4
1
CERAFILr Chip Type SFSKA Series
3
CERAFILr Chip Type Notice
5
2
3
4
5
CERAFILr Picture Band Low-Suprious SFSRA Series
CERAFILr Low-profile SFSRL Series
6
4
11
14
17
19
20
21
22
23
26
29
30
32
33
34
36
38
39
40
CERAFILr High-selectivity Type SFTRD Series
CERAFILr Chroma Signal SFSRA/ H/ L Series
5
CERAFILr Lead Type Notice
6
6
7
Ceramic Traps Chip Type TPSKA Series
Double Trap Chip Type TPWKA Series
7
Ceramic Trap Chip Type Notice
8
Ceramic Traps Three-terminals TPSRA Series
Ceramic Traps Two-terminals TPSRD Series
Ceramic Traps TPSRD Series for 2ch Sound TV in Germany
Double Traps TPWRD Series
8
9
10
11
12
9
Triple Traps TPTRD Series
10
11
12
13
14
Ceramic Trap Lead Type Notice
13
14
Discriminators Wide-Band Type CDSRH Series
Discriminators Low-Profile Type CDSRL Series
Ceramic Discriminator Notice
Chip Type Packaging
Lead Type Packaging
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
The structure of the "Global Part Numbers" that have been adopted since June 2001 and the meaning of each code are described herein.
If you have any questions about details, inquire at your usual Murata sales office or distributor.
o Part Numbering
(
)
r
CERAFIL for TV/VCR
(Global Part Number) SF
S
RA 4M50 CF 00 -B0
q
w
e
r
t
y
u
qProduct ID
tProduct Specification Code (1)
Product ID
Product Specification Code (1)
Code
AF
SF
Ceramic Filters
Standard Bandwidth Type
Tight Bandwidth Type
BF
wOscillation/Numbers of Element
Standard Bandwidth Type
Broad Bandwidth Type
CF
Oscillation/Numbers of Element
Code
DF
2 Elements Thickness Shear mode
Ultra-broad Bandwidth Type
S
T
EF
The code AF is only applied to SFT series.
3 Elements Thickness Expander mode
eStructure/Size
yProduct Specification Code (2)
Structure/Size
Lead Type
Product Specification Code (2)
Code
Rp
Code
Standard Type
00
Chip Type
Kp
uPackaging
is expressed "A" or subsequent code, which indicates the size.
p
Packaging
Bulk
Code
-B0
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M".
Radial Taping H0=18mm
Plastic Taping ø=330mm
-A0
-R1
Radial taping is applied to lead type and plastic taping to chip type.
With non-standard products, two-digit alphanumerics indicating
"Individual Specification" is added between " Product Specification
t
Code (1)" and " Product Specification Code (2)".
y
Ceramic Traps
(Global Part Number) TP
S
RA 4M50
B
00 -B0
q
w
e
r
t
y
u
qProduct ID
tProduct Specification Code (1)
Product ID
Product Specification (1)
Code
B
TP
Ceramic Traps
Broad-bandwidth Type
Low-capacitance Type
C
wFunction
yProduct Specification Code (2)
Function
Single Traps
Triple Traps
Double Traps
Code
S
Product Specification Code (2)
Code
Standard Type
T
00
W
uPackaging
eStructure/Size
Packaging
Bulk
Code
-B0
Structure/Size
Lead Type
Code
Rp
Radial Taping H0=18mm
Plastic Taping ø=330mm
-A0
Chip Type
Kp
-R1
is expressed "A" or subsequent code, which indicates the size.
Radial taping is applied to lead type and plastic taping to chip type.
With non-standard products, three-digit alphanumerics indicating
p
"Individual Specification" is added between " Product Specification
y
rNominal Center Frequency
Code (2)" and " Packaging".
u
Expressed by four-digit alphanumerics. The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M".
2
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Discriminators for TV/VCR
(Global Part Number) CD
S
RH 4M50
E
K
048 -A0
q
w
e
r
t
y
u
i
qProduct ID
yProduct Specification Code (2)
Product ID
Product Specification Code (2)
Code
CD
Discriminators
Specification
K
wOscillation
uIC
Oscillation
IC
Code
Code
Thickness Shear mode
Applicable IC control code
S
048
eStructure/Size
iPackaging
Structure/Size
Standard Type
Low-profile
Packaging
Bulk
Code
RH
Code
-B0
Radial Taping H0=18mm
RL
-A0
With non-standard products, an alphabet Indicating "Individual
Specification" is added between " IC" and " Packaging".
u
i
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M".
tProduct Specification Code (1)
Product Specification Code (1)
Three-terminals
Code
C
Two-terminals
E
3
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
1
CERAFILr(Filters/ Traps/ Discriminators) for TV/ VCR
CERAFILr Chip Type SFSKA Series
SMD ceramic filter SFSKA_CF is a small and thin SMD
filter sealed with a metal cap.
7.9±0.2
8.5±0.2
3.0±0.1
Recommended for LCD-TVs, and small and thin tuners.
1.8±0.2
0.5±0.1
■ Features
3.8±0.2
1. High attenuation outside bandwidth.
0.6±0.2
1.0±0.1
2. Small and thin pakage.
3. Reflow-solderable.
: Vender's Code
: EIAJ monthly Code
1.3±0.2
0.3±0.1
(1) : Input
(2) : Ground
(3) : Output
1.3±0.2
(1)
(2)
(3)
Electrode
in mm
2.5±0.2 2.5±0.2
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
20dB
Bandwidth
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation(1)
(dB)
Spurious
Attenuation(2)
(dB)
Input/Output
Impedance
(ohm)
Part Number
20 min.
[within 0 to fn]
15 min.
[within fn to 7.0MHz]
SFSKA4M50CF00-R1
4.500
fn±60 min.
600 max.
6.0 max.
1000
■ Frequency Characteristics
■ Spurious Response
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
0.0
2.0
4.0
6.0
8.0
10.0
3.5
3.7
3.9
4.1
4.3
4.5
4.7
4.9
5.1
5.3
5.5
Frequency (MHz)
Frequency (MHz)
■ Test Circuit
■ Standard Land Pattern Dimensions
(1) (2) (3)
(1) Input
(2) Ground
(3) Output
1.0
1.0
1.0
1.5
1.5
R1
Rg
RF
Voltmeter
E1
E2
R2
C2
S.S.G.
R1+Rg=R2=1000Ω ±5%, Rg=50Ω
C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)
E1:S.S.G. Output voltage
(in mm)
4
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
CERAFILr Chip Type Notice
1
■ Notice (Soldering and Mounting)
1. Standard Reflow Soldering Condition
(1) Reflow
Filter is soldered one time within the following
temperature condition and then being placed in natural
condition for 4 hours.
5 sec.
240
230
(2) Soldering Iron
Lead terminal is directly contacted with the tip of
soldering iron of 280±5°C for 3.0 seconds ±0.5 seconds,
and then being placed in natural condition for 4 hours.
Gradual
Cooling
150
2. Wash
Time (sec.)
60
30
The component cannot be withstand washing.
■ Notice (Handling)
1. The component may be damaged if excess mechanical
stress is applied to it mounted on the printed circuit
board.
[Component direction]
Put the compon-
ent lateral to
the direction in
which stress
acts.
2. Design layout of components on the PC board to
minimize the stress imposed on the wrap or flexure of the
board.
[Component layout close to board]
3. After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause destruction
resistance characteristics to lower. To prevent this, be
extremly careful in determining shape and dimension
before designing the circuit board diagram.
4. When the positioning claws and pick up nozzle are worn,
the load is applied to the chip while positioning is
concentrated to one positioning accuracy, etc. Careful
checking and maintenance are necessary to prevent
unexpected trouble.
Susceptibility to
stress is in the order
of;A>C>B
Perforation
A
B
C
Slit
5. When correcting chips with a soldering iron, the tip of the
soldering iron should not directly touch the chip
component.
6. Cleaning or washing of the component is not acceptable
due to non sealed construction.
7. In case of covering filter with over coat, conditions such
as material of resin, cure temperature, and so on should
be evaluated well.
8. Accurate test circuit values are required to measure
electrical characteristics. It may be a cause of miss-
correlation if there is any deviation, especially stray
capacitance, from the test circuit in the specification.
5
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
CERAFILr(Filters/ Traps/ Discriminators) for TV/ VCR
CERAFILr Picture Band Low-Suprious SFSRA Series
2
10.0 max.
As part of the environment protection activity, solder
for terminal plating and terminal-element connection
inside of ceramic filter SFSRA series contain no
lead(Pb).
M
7.0
(Ref.)
This series also features thickness shear vibration
mode same as SFSRH series(current type), which
provides very low spurious response within video
signal band.
2.5±0.2 2.5±0.2
3—0.8φ
■ Features
(3)
(2)
(1)
(in mm)
1. Excellent spurious suppression characteristics
within video signal band.
2. Available 4 pass bandwidth variation to meet
various requests.
3. Low profile (H=7.0mm max.)
4. Lead dimension : Improved mounting reliability
(cut & clinch) due to round terminal.
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
20dB
Bandwidth
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation(1)
(dB)
Spurious
Attenuation(2)
(dB)
Input/Output
Impedance
(ohm)
Part Number
30 min.
[within 0 to fn]
20 min.
[within fn to 7.0MHz]
SFSRA4M50CF00-B0
SFSRA4M50DF00-B0
SFSRA4M50EF00-B0
SFSRA5M50BF00-B0
SFSRA5M50CF00-B0
SFSRA5M50DF00-B0
SFSRA5M74BF00-B0
SFSRA5M74CF00-B0
SFSRA6M00CF00-B0
SFSRA6M00DF00-B0
SFSRA6M50CF00-B0
SFSRA6M50DF00-B0
4.500
4.500
4.500
5.500
5.500
5.500
5.742
5.742
6.000
6.000
6.500
6.500
fn±60 min.
fn±70 min.
fn±125 min.
fn±50 min.
fn±60 min.
fn±80 min.
fn±50 min.
fn±60 min.
fn±60 min.
fn±80 min.
fn±70 min.
fn±80 min.
600 max.
750 max.
850 max.
400 max.
600 max.
750 max.
400 max.
600 max.
600 max.
750 max.
650 max.
800 max.
6.0 max.
6.0 max.
6.0 max.
8.0 max.
6.0 max.
6.0 max.
8.0 max.
6.0 max.
6.0 max.
6.0 max.
6.0 max.
6.0 max.
1000
1000
1000
600
600
600
600
600
470
470
470
470
30 min.
[within 0 to fn]
20 min.
[within fn to 7.0MHz]
25 min.
[within 0 to fn]
18 min.
[within fn to 7.0MHz]
30 min.
[within 0 to fn]
20 min.
[within fn to 7.57MHz]
30 min.
[within 0 to fn]
20 min.
[within fn to7.5MHz]
30 min.
[within 0 to fn]
20 min.
[within fn to 7.5MHz]
30 min.
[within 0 to fn]
20 min.
[within fn to 8.0MHz]
30 min.
[within 0 to fn]
20 min.
[within fn to 7.5MHz]
30 min.
[within 0 to fn]
20 min.
[within fn to 8.0MHz]
30 min.
[within 0 to fn]
20 min.
[within fn to 8.0MHz]
30 min.
[within 0 to fn]
20 min.
[within fn to 8.5MHz]
30 min.
[within 0 to fn]
20 min.
[within fn to 8.5MHz]
6
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
■ Frequency Characteristics
SFSRA4M50CF00-B0
SFSRA4M50DF00-B0
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
2
3.5
3.7
3.9
4.1
4.3
4.5
4.7
4.9
5.1
5.3
5.5
3.5
3.7
3.9
4.1
4.3
4.5
4.7
4.9
5.1
5.3
5.5
Frequency (MHz)
Frequency (MHz)
SFSRA4M50EF00-B0
SFSRA5M50BF00-B0
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
3.5
3.7
3.9
54
4.3
4.5
4.7
4.9
5.1
5.3
5.5
4.5
4.7
4.9
5.1
5.3
5.5
5.7
5.9
6.1
6.3
6.5
Frequency (MHz)
Frequency (MHz)
SFSRA5M50CF00-B0
SFSRA5M50DF00-B0
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
4.5
4.7
4.9
5.1
5.3
5.5
5.7
5.9
6.1
6.3
6.5
4.5
4.7
4.9
5.1
5.3
5.5
5.7
5.9
6.1
6.3
6.5
Frequency (MHz)
Frequency (MHz)
SFSRA5M74BF00-B0
SFSRA5M74CF00-B0
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
4.7
4.9
5.1
5.3
5.5
5.7
5.9
6.1
6.3
6.5
6.7
4.7
4.9
5.1
5.3
5.5
5.7
5.9
6.1
6.3
6.5
6.7
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
7
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Continued from the preceding page.
■ Frequency Characteristics
SFSRA6M00CF00-B0
SFSRA6M00DF00-B0
0
10
20
30
40
0
10
20
30
40
2
50
60
70
50
60
70
5.0
5.2
5.4
5.6
5.8
6.0
6.2
6.4
6.6
6.8
7.0
5.0
5.2
5.4
5.6
5.8
6.0
6.2
6.4
6.6
6.8
7.0
Frequency (MHz)
Frequency (MHz)
SFSRA6M50CF00-B0
SFSRA6M50DF00-B0
0
10
20
30
40
0
10
20
30
40
50
60
70
50
60
70
5.5
5.7
5.9
6.1
6.3
6.5
6.7
6.9
7.1
7.3
7.5
5.5
5.7
5.9
6.1
6.3
6.5
6.7
6.9
7.1
7.3
7.5
Frequency (MHz)
Frequency (MHz)
■ Spurious Response
SFSRA4M50CF00-B0
SFSRA4M50DF00-B0
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
Frequency (MHz)
Frequency (MHz)
SFSRA4M50EF00-B0
SFSRA5M50BF00-B0
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
8
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Continued from the preceding page.
■ Spurious Response
SFSRA5M50CF00-B0
SFSRA5M50DF00-B0
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
2
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0.0
1.0
1.0
1.0
2.0
2.0
2.0
3.0
4.0
5.0
6.0
7.0
7.0
7.0
8.0
8.0
8.0
9.0
9.0
9.0
10.0
10.0
10.0
Frequency (MHz)
Frequency (MHz)
SFSRA5M74BF00-B0
SFSRA5M74CF00-B0
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0.0
3.0
4.0
5.0
6.0
Frequency (MHz)
Frequency (MHz)
SFSRA6M00CF00-B0
SFSRA6M00DF00-B0
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0.0
3.0
4.0
5.0
6.0
Frequency (MHz)
Frequency (MHz)
SFSRA6M50CF00-B0
SFSRA6M50DF00-B0
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
9
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Continued from the preceding page.
■ Test Circuit
1
2
3
R1
2
Rg
RF
Voltmeter
S.S.G.
R2
C
Rg+R1=R2=Input and Output Impedance
C=10pF (Including stray capacitance and
input capacitance of RF voltmeter)
10
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
CERAFILr(Filters/ Traps/ Discriminators) for TV/ VCR
CERAFILr Low-profile SFSRL Series
10.0 max.
SFSRL series are the Low-profile type of standard
SFSRA series.
E I A J
C O D E
M A R K I N G
3
■ Features
1.1±0.1
1. Installed height is 6.0mm, making it well suited
0.5±0.1
for compact, thin sets.
2. Electrical char. and performance are the same as
those of SFSRA series.
2.5
±0.2
2.5
±0.2
3. 2 types, narrow and middle bandwidth, are prepared.
(in mm)
(3)
(2)
(1)
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
20dB
Bandwidth
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation(1)
(dB)
Spurious
Attenuation(2)
(dB)
Input/Output
Impedance
(ohm)
Part Number
30 min.
[within 0 to fn]
15 min.
[within fn to 7.0MHz]
SFSRL4M50CF00-B0
SFSRL4M50DF00-B0
SFSRL5M50CF00-B0
SFSRL5M50DF00-B0
SFSRL6M00CF00-B0
SFSRL6M00DF00-B0
SFSRL6M50CF00-B0
SFSRL6M50DF00-B0
4.500
4.500
5.500
5.500
6.000
6.000
6.500
6.500
fn±60 min.
fn±70 min.
fn±60 min.
fn±80 min.
fn±60 min.
fn±80 min.
fn±70 min.
fn±80 min.
600 max.
750 max.
600 max.
750 max.
600 max.
750 max.
650 max.
800 max.
6.0 max.
6.0 max.
6.0 max.
6.0 max.
6.0 max.
6.0 max.
6.0 max.
6.0 max.
1000
1000
600
600
470
470
470
470
30 min.
[within 0 to fn]
15 min.
[within fn to 5.7MHz]
30 min.
[within 0 to fn]
15 min.
[within fn to 7.0MHz]
30 min.
[within 0 to fn]
15 min.
[within fn to 7.0MHz]
30 min.
[within 0 to fn]
15 min.
[within fn to 7.5MHz]
30 min.
[within 0 to fn]
15 min.
[within fn to 7.5MHz]
30 min.
[within 0 to fn]
15 min.
[within fn to 8.5MHz]
30 min.
[within 0 to fn]
15 min.
[within fn to 8.0MHz]
■ Frequency Characteristics
SFSRL4M50CF00-B0
SFSRL4M50DF00-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
3.5
3.7
3.9
4.1
4.3
4.5
4.7
4.9
5.1
5.3
5.5
3.5
3.7
3.9
4.1
4.3
4.5
4.7
4.9
5.1
5.3
5.5
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
11
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Continued from the preceding page.
■ Frequency Characteristics
SFSRL5M50CF00-B0
SFSRL5M50DF00-B0
0
10
20
30
40
50
60
70
0
10
20
30
40
50
3
60
70
4.5
4.7
4.9
5.1
5.3
5.5
5.7
5.9
6.1
6.3
6.5
4.5
4.7
4.9
5.1
5.3
5.5
5.7
5.9
6.1
6.3 6.5
Frequency (MHz)
Frequency (MHz)
SFSRL6M00CF00-B0
SFSRL6M00DF00-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
5.0
5.2
5.4
5.6
5.8
6.0
6.2
6.4
6.6
6.8
7.0
5.0
5.2
5.4
5.6
5.8
6.0
6.2
6.4
6.6
6.8
7.0
Frequency (MHz)
Frequency (MHz)
SFSRL6M50CF00-B0
SFSRL6M50DF00-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
5.5
5.7
5.9
6.1
6.3
6.5
6.7
6.9
7.1
7.3
7.5
5.5
5.7
5.9
6.1
6.3
6.5
6.7
6.9
7.1
7.3
7.5
Frequency (MHz)
Frequency (MHz)
■ Spurious Response
SFSRL4M50CF00-B0
SFSRL4M50DF00-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
12
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Continued from the preceding page.
■ Spurious Response
SFSRL5M50CF00-B0
SFSRL5M50DF00-B0
0
10
20
30
40
50
60
70
0
10
20
30
40
50
3
60
70
0.0
1.0
1.0
1.0
2.0
2.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
8.0
8.0
9.0
9.0
9.0
10.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0 10.0
Frequency (MHz)
Frequency (MHz)
SFSRL6M00CF00-B0
SFSRL6M00DF00-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0.0
3.0
4.0
5.0
6.0
7.0
10.0
Frequency (MHz)
Frequency (MHz)
SFSRL6M50CF00-B0
SFSRL6M50DF00-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0.0
3.0
4.0
5.0
6.0
7.0
10.0
Frequency (MHz)
Frequency (MHz)
■ Test Circuit
1
2
3
R1
Rg
RF
Voltmeter
S.S.G.
R2
C
Rg+R1=R2=Input and Output Impedance
C=10pF (Including stray capacitance and
input capacitance of RF voltmeter)
13
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
CERAFILr(Filters/ Traps/ Discriminators) for TV/ VCR
CERAFILr High-selectivity Type SFTRD Series
15.0±2.0
Ceramic filter SFTRD_AF series are high selectivity
filter which involves 3-elements filter unit.
A
T
E I A J
C O D E
■ Features
1.4±0.1
0.5±0.1
1. Excellent shape factor.
2. Good performance for spurious suppression.
3. Four-terminals type.
7.5±0.2
4
2.5±0.2
2.5±0.2
4. Suitable for 2 channel Multi-sound TV of Germany
and Korea.
(1) (2)
(3) (4)
(in mm)
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
20dB
Bandwidth
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation(1)
(dB)
Spurious
Attenuation(2)
(dB)
Input/Output
Impedance
(ohm)
Part Number
50 min.
40 min.
SFTRD4M50AF00-B0
SFTRD5M50AF00-B0
SFTRD5M74AF00-B0
SFTRD6M00AF00-B0
SFTRD6M50AF00-B0
4.500
5.500
5.742
6.000
6.500
fn±40 min.
fn±50 min.
fn±50 min.
fn±50 min.
fn±50 min.
370 max.
350 max.
350 max.
400 max.
400 max.
10.0 max.
9.0 max.
9.0 max.
9.0 max.
9.0 max.
1000
600
600
470
470
[within fn-1.0MHz to fn] [within fn to fn+0.8MHz]
50 min. 50 min.
[within fn-1.0MHz to fn] [within fn to fn+1.0MHz]
50 min. 50 min.
[within fn-1.0MHz to fn] [within fn to fn+1.0MHz]
50 min. 50 min.
[within fn-1.0MHz to fn] [within fn to fn+1.0MHz]
50 min. 50 min.
[within fn-1.0MHz to fn] [within fn to fn+1.0MHz]
■ Frequency Characteristics
SFTRD4M50AF00-B0
SFTRD5M50AF00-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
4.7
4.9
5.1
5.3
5.5
5.7
5.9
6.1
6.3
6.5
4.5
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5.0
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
14
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Continued from the preceding page.
■ Frequency Characteristics
SFTRD5M74AF00-B0
SFTRD6M00AF00-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
5.5
5.6
5.7
5.8
5.9
6.0
6.1
6.2
6.3
6.4
6.5
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.0
6.1
6.2
Frequency (MHz)
4
Frequency (MHz)
SFTRD6M50AF00-B0
0
10
20
30
40
50
60
70
6.0
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7.0
Frequency (MHz)
■ Spurious Response
SFTRD4M50AF00-B0
SFTRD5M50AF00-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
Frequency (MHz)
Frequency (MHz)
SFTRD5M74AF00-B0
SFTRD6M00AF00-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
15
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Continued from the preceding page.
■ Spurious Response
SFTRD6M50AF00-B0
0
10
20
30
40
50
60
70
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
Frequency (MHz)
4
■ Test Circuit
(1) (2)
(3) (4)
R1
Rg
R.F.
Voltmeter
R2
C
S.S.G
(1)
: Input
(2),(3) : Ground
(3)
: Output
Rg + R1 = R2 = 330Ω
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
16
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
CERAFILr(Filters/ Traps/ Discriminators) for TV/ VCR
CERAFILr Chroma Signal SFSRA/H/L Series
10.0 max.
Chroma signals frequency conversion process is
involved in VCRs video signal processing circuit.
These SFSRA/SFSRH/SFSRL series are suitable for B.P.F.
M
7.0
(Ref.)
■ Features
1. Frequency adjustment free.
2. Responsible for VHS. 8mm VCR system.
2.5±0.2 2.5±0.2
SFSRA Series
3—0.8φ
5
(3)
(2)
(1)
(in mm)
10.0 max.
10.0 max.
E I A J
C O D E
M A R K I N G
M
F4.5D
1.1±0.1
1.38±0.2
1.7±0.1
0.5±0.1
0.5±0.1
2.5
±0.2
2.5
±0.2
2.5
±0.2
2.5
±0.2
(1) Input
(2) Ground
(3) Output
SFSRH Series
SFSRL Series
(3) (2) (1)
(in mm)
(in mm)
(3)
(2)
(1)
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
20dB
Bandwidth
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation(1)
(dB)
Spurious
Attenuation(2)
(dB)
Input/Output
Impedance
(ohm)
Part Number
30 min.
[within 0 to fn]
20 min.
[within fn to 7.0MHz]
SFSRA4M43CF00-B0
SFSRH3M58CF00-B0
SFSRL4M32DF00-B0
SFSRL5M17DF00-B0
4.430
3.580
4.320
5.170
fn±60 min.
fn±40 min.
fn±70 min.
fn±70 min.
600 max.
530 max.
750 max.
750 max.
6.0 max.
6.0 max.
6.0 max.
7.5 max.
1000
1000
1000
600
25 min.
[within 0 to fn]
15 min.
[within fn to 6.0MHz]
30 min.
[within 0 to fn]
15 min.
[within fn to 5.5MHz]
30 min.
[within 0 to fn]
15 min.
[within fn to 7.0MHz]
■ Frequency Characteristics
SFSRA4M43CF00-B0
SFSRH3M58CF00-B0
0
10
20
0
10
20
30
40
50
30
40
50
60
70
60
70
3.5
3.7
3.9
4.1
4.3
4.5
4.7
4.9
5.1
5.3
5.5
2.7
2.9
3.1
3.3
3.5
3.7
3.9
4.1
4.3
4.5
4.7
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
17
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Continued from the preceding page.
■ Frequency Characteristics
SFSRL4M32DF00-B0
SFSRL5M17DF00-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
3.3
3.5
3.7
3.9
4.1
4.3
4.5
4.7
4.9
5.1
5.3
4.2
4.4
4.6
2.0
2.0
4.8
5.0
5.2
5.4
5.6
7.0
7.0
5.8
8.0
8.0
6.0
9.0
9.0
6.2
Frequency (MHz)
Frequency (MHz)
■ Spurious Response
5
SFSRA4M43CF00-B0
SFSRH3M58CF00-B0
0
10
20
0
10
20
30
40
50
30
40
50
60
70
60
70
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
Frequency (MHz)
0.0
1.0
3.0
4.0
5.0
6.0
10.0
Frequency (MHz)
SFSRL4M32DF00-B0
SFSRL5M17DF00-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0.0
1.0
3.0
4.0
5.0
6.0
10.0
Frequency (MHz)
Frequency (MHz)
■ Test Circuit
1
2
3
R1
Rg
RF
Voltmeter
S.S.G.
R2
C
Rg+R1=R2=Input and Output Impedance
C=10pF (Including stray capacitance and
input capacitance of RF voltmeter)
18
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
CERAFILr Lead Type Notice
■ Notice (Soldering and Mounting)
The component cannot be withstand washing.
■ Notice (Handling)
1. Do not use this product with bend. The component
may be damaged if excess mechanical stress is
applied to it mounted on the printed circuit board.
2. The component may be damaged when an excess stress
will be applied.
solder.
6. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in flow soldering.
7. In case of covering filter with over coat,
conditions such as material of resin, cure
temperature, and so on should be evaluated well.
8. Accurate test circuit values are required to
measure electrical characteristics. It may be a
cause of miss-correlation if there is any deviation,
especially stray capacitance, from the test circuit
in the specification.
3. All kinds of re-flow soldering must not be applied
on the component.
4. Do not clean or wash the component as it is not
hermetically sealed.
5
5. Please contact Murata or Murata representative for
soldering condition, in case of using lead free
19
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
CERAFILr(Filters/ Traps/ Discriminators) for TV/ VCR
Ceramic Traps Chip Type TPSKA Series
SMD ceramic trap TPSKA_B is small and thin SMD trap
sealed with a metal cap. Recommended for LCD-TVs, and
small and thin tuners.
7.9±0.2
8.5±0.2
3.0±0.1
1.8±0.2
0.5±0.1
■ Features
3.8±0.2
1. High attenuation and high performance group
0.6±0.2
1.0±0.1
Marking : TAB
delay time.
1.3±0.2
0.3±0.1
: Vender's Code
: EIAJ Monthly code
2. Small and thin pakage.
(1) : Input
(2) : Ground
(3) : Output
1.3±0.2
3. Reflow-solderable.
(1)
(2)
(3)
Electrode
in mm
2.5±0.2 2.5±0.2
Nominal Center
Frequency (fn1)
(MHz)
Attenuation
(at fn1)
(dB)
30dB Attenuation
BW (fn1)
Part Number
6
(kHz)
TPSKA4M50B00-R1
4.500
35 min.
50 min.
■ Frequency Characteristics
■ Spurious Response
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
80
700
600
500
400
300
200
100
0
0
1.0
2.0
3.0
4.0
5.0
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5.0
Frequency (MHz)
Frequency (MHz)
■ Test Circuit
■ Standard Land Pattern Dimensions
L
1.0
1.0
1.0
R1
1.5
1.5
Rg
50Ω
R2
RF
Voltmeter
S.S.G.
Rg=50Ω
L=15µH
R1=330Ω
R2=1.0kΩ
20
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
CERAFILr(Filters/ Traps/ Discriminators) for TV/ VCR
Double Trap Chip Type TPWKA Series
SMD ceramic trap TPWKA is small and thin SMD trap
sealed with a metal cap. Recommended for LCD-TVs, and
small and thin tuners.
M
7.9±0.2
4.2±0.1
This series consist of 2 wafers with 2 trap
frequencies. Recommended for Multi standard set.
8.5±0.2
5.0±0.2
0.4±0.2
1.0±0.1
: Electrode
■ Features
(1) : Input or Output
(2) : Ground
(3) : Output or Input
0.3±0.1
1. Good performance of attenuation.
2. Small and thin package.
3. Reflow-solderable.
(1)
(2)
(3)
2.5±0.2 2.5±0.2
(in mm)
Nominal Center
Frequency (fn1)
(MHz)
Nominal Center
Frequency (fn2)
(MHz)
Attenuation
(at fn1)
(dB)
Attenuation
(at fn2)
(dB)
30dB Attenuation
BW (fn1)
Part Number
(kHz)
TPWKA5M50B04-R1
5.500
5.742
30 min.
30 min.
50 min.
7
■ Frequency Characteristics
■ Spurious Response
0
10
20
30
40
50
60
0
10
20
30
40
50
60
800
600
400
200
0
70
70
0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
4.5
4.7
4.9
5.1
5.3
5.5
5.7
5.9
6.1
6.3
6.5
Frequency (MHz)
Frequency (MHz)
■ Test Circuit
■ Standard Land Pattern Dimensions
1.2
1.2
1.2
L
1.3
1.3
R1
Rg
R2
C2
50Ω
RF
Voltmeter
S.S.G.
L = 8.2 µH
Rg = 50 Ω
R1 = 150 Ω
R2 = 330 Ω
C2 = 10pF (Including stray capacitance and input capacitance of RF voltmeter)
(in mm)
21
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Ceramic Trap Chip Type Notice
■ Notice (Soldering and Mounting)
1. Standard Reflow Soldering Condition
(1) Reflow
Trap is soldered one time within the following
temperature condition and then being placed in natural
5 sec.
240
condition for 4 hours.
230
(2) Soldering Iron
Lead terminal is directly contacted with the tip of
soldering iron of 280±5°C for 3.0 seconds ±0.5 seconds,
Gradual
Cooling
and then being placed in natural condition for 4 hours.
150
2. Wash
Time (sec.)
60
30
The component cannot be withstand washing.
■ Notice (Handling)
1. The component may be damaged if excess mechanical
[Component direction]
stress is applied to it mounted on the printed circuit
Put the compon-
board.
ent lateral to
the direction in
which stress
acts.
2. Design layout of components on the PC board to
minimize the stress imposed on the wrap or flexure of the
board.
7
[Component layout close to board]
3. After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause destruction
resistance characteristics to lower. To prevent this, be
extremly careful in determining shape and dimension
before designing the circuit board diagram.
Susceptibility to
stress is in the order
of;A>C>B
Perforation
A
B
C
Slit
4. When the positioning claws and pick up nozzle are worn,
the load is applied to the chip while positioning is
concentrated to one positioning accuracy, etc. Careful
checking and maintenance are necessary to prevent
unexpected trouble.
5. When correcting chips with a soldering iron, the tip of the
soldering iron should not directly touch the chip
component.
6. Cleaning or washing of the component is not acceptable
due to non sealed construction.
7. In case of covering filter with over coat, conditions such
as material of resin, cure temperature, and so on should
be evaluated well.
8. Accurate test circuit values are required to measure
electrical characteristics. It may be a cause of miss-
correlation if there is any deviation, especially stray
capacitance, from the test circuit in the specification.
22
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
CERAFILr(Filters/ Traps/ Discriminators) for TV/ VCR
Ceramic Traps Three-terminals TPSRA Series
10.0 max.
As part of the environment protection activity, solder
for terminal plating and terminal-element connection
inside of ceramic filter TPSRA series contain no
lead(Pb).
M
7.0
(Ref.)
This series consist of 2 trap element on one wafer.
Suitable for the sound IF trap of CTV/VCR.
2.5±0.2 2.5±0.2
■ Features
1. Good performance of attenuation.
2. Shape factor can be changed by the value of
Inductor "L".
3—0.8φ
(in mm)
3. Three-terminals type.
4. Low profile (H=7.0mm max.).
5. Lead dimension:
Improved mounting reliability(cut & clinch) due to
round terminal.
Nominal Center
Frequency (fn1)
(MHz)
Attenuation
(at fn1)
(dB)
30dB Attenuation
BW (fn1)
Part Number
(kHz)
TPSRA4M50B00-B0
TPSRA4M50C00-B0
TPSRA5M50B00-B0
TPSRA5M74B00-B0
TPSRA6M00B00-B0
TPSRA6M50B00-B0
4.500
4.500
5.500
5.742
6.000
6.500
35 min.
30 min.
35 min.
35 min.
35 min.
35 min.
50 min.
-
8
70 min.
70 min.
70 min.
70 min.
■ Frequency Characteristics
TPSRA4M50B00-B0
TPSRA4M50C00-B0
0
10
20
30
40
50
60
0
10
20
30
40
50
60
70
70
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5.0
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5.0
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
23
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Continued from the preceding page.
■ Frequency Characteristics
TPSRA5M50B00-B0
TPSRA5M74B00-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
5.0
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.0
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.0
6.1
6.2
Frequency (MHz)
Frequency (MHz)
TPSRA6M00B00-B0
TPSRA6M50B00-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
5.5
5.6
5.7
5.8
5.9
6.0
6.1
6.2
6.3
6.4
6.5
6.0
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7.0
Frequency (MHz)
Frequency (MHz)
8
■ Spurious Response
TPSRA4M50B00-B0
TPSRA4M50C00-B0
0
10
20
30
40
50
60
0
10
20
30
40
50
60
800
600
400
200
0
800
600
400
200
0
70
70
0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
Frequency (MHz)
Frequency (MHz)
TPSRA5M50B00-B0
TPSRA5M74B00-B0
0
10
20
30
40
50
60
0
10
20
30
40
50
60
800
600
400
200
0
800
600
400
200
0
70
70
0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
24
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Continued from the preceding page.
■ Spurious Response
TPSRA6M00B00-B0
TPSRA6M50B00-B0
0
10
20
30
40
50
60
0
10
20
30
40
50
60
800
600
400
200
0
800
600
400
200
0
70
70
0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
Frequency (MHz)
Frequency (MHz)
■ Test Circuit
TPSRA4M50B00-B0
TPSRA4M50C00-B0
15µH
8.2µH
330ohm
220ohm
Rg=50ohm
S.S.G.
Rg=50ohm
S.S.G.
R.F.
Voltmeter
R.F.
Voltmeter
8
TPSRA5M50/5M74/6M00/6M50B00-B0
15µH
220ohm
Rg=50ohm
S.S.G.
R.F.
Voltmeter
25
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
CERAFILr(Filters/ Traps/ Discriminators) for TV/ VCR
Ceramic Traps Two-terminals TPSRD Series
10.0 max.
Ceramic Trap TPSRD_J series are two-terminals type.
Which are recommended for the attenuation of sound IF
in B/W TV and the attenuation of chroma signal in
Video Camcorder.
T
J
E I A J
C O D E
1.38±0.2
■ Features
1. Small-size, Light-weight.
2. High performance, durability.
3. Easy to design due to two-terminals type.
0.5±0.1
5.0±0.2
in mm
Nominal Center
Frequency (fn1)
(MHz)
Attenuation
(at fn1)
(dB)
30dB Attenuation
BW (fn1)
Part Number
(kHz)
TPSRD3M58J00-B0
TPSRD4M43J00-B0
TPSRD4M50J00-B0
TPSRD5M50J00-B0
TPSRD6M00J00-B0
TPSRD6M50J00-B0
3.580
4.430
4.500
5.500
6.000
6.500
20 min.
20 min.
20 min.
20 min.
20 min.
20 min.
20 min.[20dB Att.BW]
40 min.[20dB Att.BW]
30 min.[20dB Att.BW]
30 min.[20dB Att.BW]
40 min.[20dB Att.BW]
40 min.[20dB Att.BW]
■ Frequency Characteristics
TPSRD3M58J00-B0
TPSRD4M43J00-B0
9
0
10
20
30
40
50
0
10
20
30
40
50
60
60
70
70
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
Frequency (MHz)
Frequency (MHz)
TPSRD4M50J00-B0
TPSRD5M50J00-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
60
70
70
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5.0
5.0
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.0
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
26
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Continued from the preceding page.
■ Frequency Characteristics
TPSRD6M00J00-B0
TPSRD6M50J00-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
5.5
5.6
5.7
5.8
5.9
6.0
6.1
6.2
7.0
7.0
7.0
6.3
8.0
8.0
8.0
6.4
9.0
9.0
9.0
6.5
6.0
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7.0
Frequency (MHz)
Frequency (MHz)
■ Spurious Response
TPSRD3M58J00-B0
TPSRD4M43J00-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
0.0
1.0
1.0
1.0
2.0
2.0
2.0
3.0
4.0
5.0
6.0
10.0
10.0
10.0
0.0
1.0
1.0
1.0
2.0
2.0
2.0
3.0
4.0
5.0
6.0
7.0
7.0
7.0
8.0
8.0
8.0
9.0
9.0
9.0
10.0
10.0
10.0
Frequency (MHz)
Frequency (MHz)
9
TPSRD4M50J00-B0
TPSRD5M50J00-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
0.0
3.0
4.0
5.0
6.0
0.0
3.0
4.0
5.0
6.0
Frequency (MHz)
Frequency (MHz)
TPSRD6M00J00-B0
TPSRD6M50J00-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
0.0
3.0
4.0
5.0
6.0
0.0
3.0
4.0
5.0
6.0
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
27
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Continued from the preceding page.
■ Test Circuit
75Ω
Rg=50Ω
R.F.
Voltmeter
Ceramic
Trap
S.S.G.
9
28
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
CERAFILr(Filters/ Traps/ Discriminators) for TV/ VCR
Ceramic Traps TPSRD Series for 2ch Sound TV in Germany
7.0±2.0
Ceramic trap TPSRD_W series has same structure as
TPSRD_B series. But they can trap 2 individual
T
frequencies in one time. Recommended for 2 channels
E
I
A
D
J
C
O
E
multi-sound TV system.
1.38±0.2
1.7±0.1
■ Features
1. Space saving.
0.5±0.1
2. Three-terminals type.
2.5
±0.2 ±0.2
2.5
in mm
(3)
(2)
(1)
Nominal Center
Frequency (fn1)
(MHz)
Nominal Center
Frequency (fn2)
(MHz)
Attenuation
(at fn1)
(dB)
Attenuation
(at fn2)
(dB)
30dB Attenuation
BW (fn1)
Part Number
(kHz)
TPSRD5M50W00-B0
5.500
5.742
32 min.
25 min.
70 min.
■ Frequency Characteristics
■ Spurious Response
0
10
20
30
40
50
0
10
20
30
40
50
10
60
70
60
70
5.0
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
Frequency (MHz)
Frequency (MHz)
■ Test Circuit
15µH
330ohm
Rg=50ohm
S.S.G.
R.F.
Voltmeter
29
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
CERAFILr(Filters/ Traps/ Discriminators) for TV/ VCR
Double Traps TPWRD Series
7.0±2.0
Ceramic trap TPWRD_B series consist of 2 wafers with
2 trap frequencies. Recommended for Dual standard set.
T
W
B
E I A J
C O D E
■ Features
1. Good performance of attenuation.
1.38±0.2
1.7±0.1
2. Small and thin package.
3. Three-terminals type.
0.5±0.1
2.5±0.2 2.5
±0.2
in mm
Nominal Center
Frequency (fn1)
(MHz)
Nominal Center
Frequency (fn2)
(MHz)
Attenuation
(at fn1)
(dB)
Attenuation
(at fn2)
(dB)
30dB Attenuation
BW (fn1)
Part Number
(kHz)
TPWRD5M50B02-B0
TPWRD5M50B03-B0
TPWRD5M50B04-B0
TPWRD6M00B01-B0
5.500
5.500
5.500
6.000
6.500
6.000
5.742
6.500
30 min.
30 min.
30 min.
30 min.
30 min.
30 min.
30 min.
30 min.
50 min.
50 min.
50 min.
70 min.
■ Frequency Characteristics
TPWRD5M50B02-B0
TPWRD5M50B03-B0
0
0
10
20
30
40
50
10
20
30
40
50
60
70
60
70
11
4.5
4.7
4.9
5.1
5.3
5.5
5.7
5.9
6.1
6.3
6.5
5.0
5.2
5.4
5.6
5.8
6.0
6.2
6.4
6.6
6.8
7.0
Frequency (MHz)
Frequency (MHz)
TPWRD5M50B04-B0
TPWRD6M00B01-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
4.5
4.7
4.9
5.1
5.3
5.5
5.7
5.9
6.1
6.3
6.5
5.0
5.2
5.4
5.6
5.8
6.0
6.2
6.4
6.6
6.8
7.0
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
30
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Continued from the preceding page.
■ Spurious Response
TPWRD5M50B02-B0
TPWRD5M50B03-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
Frequency (MHz)
Frequency (MHz)
TPWRD5M50B04-B0
TPWRD6M00B01-B0
0
10
20
30
40
50
0
10
20
30
40
50
60
70
60
70
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
Frequency (MHz)
Frequency (MHz)
■ Test Circuit
8.2µH
150ohm
Rg=50ohm
S.S.G.
R.F.
Voltmeter
11
31
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
CERAFILr(Filters/ Traps/ Discriminators) for TV/ VCR
Triple Traps TPTRD Series
8.0±2.0
Ceramic trap TPTRD_B series consist of 3 wafers with
3 trap frequencies. Recommended for Multi standard set.
T
T
B
E I A J
C O D E
■ Features
1.38±0.2
1.7±0.1
1. Good performance of attenuation.
2. Space saving for Multi set.
3. Three-terminals type.
0.5±0.1
2.5±0.2
2.5±0.2
in mm
Nominal Center
Frequency (fn1)
(MHz)
Nominal Center
Frequency (fn2)
(MHz)
Nominal Center
Frequency (fn3)
(MHz)
Attenuation
(at fn1)
(dB)
Attenuation
(at fn2)
(dB)
Attenuation
(at fn3)
(dB)
30dB Attenuation
BW (fn1)
Part Number
(kHz)
TPTRD5M50B01-B0
5.500
6.000
6.500
30 min.
30 min.
30 min.
50 min.
■ Frequency Characteristics
■ Spurious Response
TPTRD5M50B01-B0
TPTRD5M50B01-B0
0
0
10
10
20
30
40
50
60
70
80
20
30
40
50
60
70
80
90
5.000
90
5.500
6.000
6.500
7.000
0.0
2.5
5.0
7.5
10.0
Frequency ( MHz )
Frequency ( MHz )
■ Test Circuit
12
8.2µH
150ohm
Rg=50ohm
S.S.G.
R.F.
Voltmeter
32
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Ceramic Trap Lead Type Notice
■ Notice (Soldering and Mounting)
The component cannot be withstand washing.
■ Notice (Handling)
1. Do not use this product with bend. The component
may be damaged if excess mechanical stress is
applied to it mounted on the printed circuit board.
2. The component may be damaged when an excess stress
will be applied.
solder.
6. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in flow soldering.
7. In case of covering filter with over coat,
conditions such as material of resin, cure
temperature, and so on should be evaluated well.
8. Accurate test circuit values are required to
measure electrical characteristics. It may be a
cause of miss-correlation if there is any deviation,
especially stray capacitance, from the test circuit
in the specification.
3. All kinds of re-flow soldering must not be applied
on the component.
4. Do not clean or wash the component as it is not
hermetically sealed.
5. Please contact Murata or Murata representative for
soldering condition, in case of using lead free
12
33
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
CERAFILr(Filters/ Traps/ Discriminators) for TV/ VCR
Discriminators Wide-Band Type CDSRH Series
10.0 max.
Ceramic discriminator CDSRH series is a wide band, low
profil type using thickness shear mode vibration.
E I A J
C O D E
M A R K I N G
■ Features
1. Low profile 8.0mm type.
1.38±0.2
2. Suitable for Multi-sound Broadcasting system.
3. Two-terminals type and three-terminals type are
available.
0.5±0.1
5.0±0.2
CDSRH_EK Series
Unit : mm
10.0 max.
EIAJ
M A R K I N G
CODE
1.38±0.2
1.7±0.1
0.5±0.1
2.5±0.2 2.5±0.2
CDSRH_CK Series
(in mm)
(3) (2) (1)
Nominal Center
Frequency (fn)
(MHz)
Recovered
Audio 3dB BW
(kHz)
Recovered Audio
Output Voltage(at fn)
(mV)
Distortion
(% )
Part Number
IC
Detection Method
CDSRH4M50EK020-B0
CDSRH4M50EK023-B0
CDSRH4M50EK035-B0
CDSRH4M50EK049-B0
CDSRH4M50EK060-B0
CDSRH4M50EK069-B0
CDSRH4M50EK070-B0
CDSRH5M50EK023-B0
CDSRH5M50EK035-B0
CDSRH5M50EK049-B0
CDSRH5M50EK054-B0
CDSRH5M50EK060-B0
CDSRH5M74EK054-B0
CDSRH6M00EK049-B0
CDSRH6M00EK054-B0
CDSRH6M00EK060-B0
CDSRH6M50EK020-B0
CDSRH6M50EK049-B0
CDSRH6M50EK054-B0
CDSRH6M50EK060-B0
CDSRH4M50CK020-B0
CDSRH4M50CK026-B0
CDSRH4M50CK029-B0
CDSRH4M50CK030-B0
4.500
4.500
4.500
4.500
4.500
4.500
4.500
5.500
5.500
5.500
5.500
5.500
5.742
6.000
6.000
6.000
6.500
6.500
6.500
6.500
4.500
4.500
4.500
4.500
fn±80 min.
fn±60 min.
fn±55 min.
fn±100 min.
fn±90 min.
fn±60 min.
fn±50 min.
fn±45 min.
fn±80 min.
fn±60 min.
fn±100 min.
fn±70 min.
fn±90 min.
fn±60 min.
fn±90 min.
fn±60 min.
fn±110 min.
fn±60 min.
fn±90 min.
fn±60 min.
fn±50 min.
fn±40 min.
fn±65 min.
fn±40 min.
245 min.
230 min.
240 min.
220 min.
90 min.
1.0 max.
2.5 max.
1.0 max.
1.0 max.
1.0 max.
1.5 max.
1.5 max.
1.0 max.
1.0 max.
1.0 max.
1.2 max.
1.5 max.
1.2 max.
1.0 max.
1.5 max.
2.5 max.
1.2 max.
1.0 max.
1.5 max.
2.5 max.
2.0 max.
1.2 max.
1.2 max.
3.0 max.
LA7550/7555
M51496P
LA7680/7681
LA7577
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
M52318SP
TA8701N
M52007FP
M51496P
LA7680/7681
LA7577
320 min.
65 min.
220 min.
350 min.
500 min.
300 min.
190 min.
340 min.
500 min.
340 min.
180 min.
350 min.
500 min.
340 min.
160 min.
280 min.
70 min.
TDA3857
M52318SP
TDA3857
13
LA7577
TDA3857
M52318SP
LA7550/7555
LA7577
TDA3857
M52318SP
µPC1382C
LA7530
250 min.
within130 +30/-20mV
M51365SP
M51348FP
Continued on the following page.
34
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Continued from the preceding page.
Nominal Center
Frequency (fn)
(MHz)
Recovered
Audio 3dB BW
(kHz)
Recovered Audio
Output Voltage(at fn)
(mV)
Distortion
(% )
Part Number
IC
Detection Method
CDSRH5M50CK026-B0
CDSRH5M50CK029-B0
CDSRH5M50CK030-B0
CDSRH6M00CK026-B0
CDSRH6M00CK029-B0
CDSRH6M00CK030-B0
CDSRH6M50CK020-B0
CDSRH6M50CK026-B0
CDSRH6M50CK029-B0
5.500
5.500
5.500
6.000
6.000
6.000
6.500
6.500
6.500
fn±50 min.
fn±70 min.
fn±55 min.
fn±50 min.
fn±70 min.
fn±55 min.
fn±60 min.
fn±35 min.
fn±70 min.
500 min.
420 min.
150 min.
400 min.
450 min.
150 min.
480 min.
400 min.
430 min.
3.0 max.
1.5 max.
3.0 max.
3.0 max.
1.7 max.
3.0 max.
2.0 max.
3.0 max.
2.0 max.
LA7530
M51365SP
M51348FP
LA7530
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
M51365SP
M51348FP
µPC1382C
LA7530
M51365SP
Characteristics shown above is as of 100% Dev.
Part Numbers are varied with applied IC.
Please note circuits and specifications are also varied with IC. (->Please check TM1561)
■ Frequency Characteristics
CDSRH4M50EK049-B0
CDSRH4M50CK029-B0
300
100
300
AF Output
AF Output
10
100
10
10
1
10
1
Distoriton
Distoriton
1
1
0.1
0.1
4.3
4.5
4.7
4.3
4.5
4.7
Frequency (MHz)
Frequency (MHz)
■ Test Circuit
CDSRH4M50EK049-B0
CDSRH4M50CK029-B0
12P
IF-in
(1)
(3)
(2)
18
0.01µ
24 23 22 21 20 19 18 17 16 15 14 13
DC Out
17
19
IN
13
4.7µ
LA7577 (SANYO)
M51365SP
(MITSUBISHI)
AF Out
+
1
2
3
4
5
6
7
8
9
10 11 12
14
5.6k
7
10 12
AF-out
Vcc (12V)
Vcc=12V
Ground
13
+
10µ
Ground
35
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
CERAFILr(Filters/ Traps/ Discriminators) for TV/ VCR
Discriminators Low-Profile Type CDSRL Series
10.0 max.
Ceramic discriminator CDSRL series is a wide band, low
profile type using thickness shear mode vibration.
E I A J
C O D E
M A R K I N G
■ Features
1. Low profile 6.0mm type.
1.0±0.2
2. Suitable for Multi-sound Broadcasting system.
3. Two-terminals type and three-terminals type are
available.
0.5±0.1
5.0±0.2
CDSRL_EK Series
Unit : mm
10.0 max.
E I A J
C O D E
M A R K I N G
1.1±0.1
1.7±0.1
0.5±0.1
2.5±0.2 2.5±0.2
CDSRL_CK Series
(in mm)
(3)
(2)
(1)
Nominal Center
Frequency (fn)
(MHz)
Recovered
Audio 3dB BW
(kHz)
Recovered Audio
Output Voltage(at fn)
(mV)
Distortion
(% )
Part Number
IC
Detection Method
CDSRL4M50EK020-B0
CDSRL5M50EK020-B0
CDSRL4M50CK020-B0
CDSRL4M50CK029-B0
CDSRL4M50CK030-B0
CDSRL5M50CK030-B0
CDSRL6M00CK029-B0
CDSRL6M00CK030-B0
CDSRL6M50CK020-B0
CDSRL6M50CK026-B0
4.500
5.500
4.500
4.500
4.500
5.500
6.000
6.000
6.500
6.500
fn±80 min.
fn±100 min.
fn±50 min.
fn±65 min.
fn±40 min.
fn±55 min.
fn±70 min.
fn±55 min.
fn±60 min.
fn±35 min.
245 min.
330 min.
1.0 max.
1.2 max.
2.0 max.
1.2 max.
3.0 max.
3.0 max.
1.7 max.
3.0 max.
2.0 max.
3.0 max.
LA7550/7555
LA7550/7555
µPC1382C
M51365SP
M51348FP
M51348FP
M51365SP
M51348FP
µPC1382C
LA7530
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
Quadrature
280 min.
250 min.
within130 +30/-20mV
150 min.
450 min.
150 min.
480 min.
400 min.
Characteristics shown above is as of 100% Dev.
Part Numbers are varied with applied IC.
Please note circuits and specifications are also varied with IC. (->Please check TM1561)
14
36
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
■ Frequency Characteristics
CDSRL4M50EK020-B0
CDSRL4M50CK029-B0
500
300
300
100
AF Output
AF Output
10
100
10
1
10
10
1
1
Distoriton
Distoriton
1
0.1
4.7
0.1
4.3
4.5
4.3
4.5
4.7
Frequency (MHz)
Frequency (MHz)
■ Test Circuit
CDSRL4M50EK020-B0
CDSRL4M50CK029-B0
SIF IN
12P
(1)
(3)
(2)
Vcc 9V
DC5V Chang
18
0.01µ
DC Out
17
19
24
20
19
18 17
15
14
13
12
IN
13
4.7µ
AF Out
M51365SP
(MITSUBISHI)
+
LA7550 (SANYO)
1
2
6
7
8
9
11
14
7
10 12
0.01µ
0.01µ
Vcc=12V
Ground
AF OUT
100µ
+
-
+
10µ
Ground
14
37
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Ceramic Discriminator Notice
■ Notice (Soldering and Mounting)
The component cannot be withstand washing.
■ Notice (Handling)
1. Do not use this product with bend. The component
may be damaged if excess mechanical stress is
applied to it mounted on the printed circuit board.
2. The component may be damaged when an excess stress
will be applied.
solder.
6. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in flow soldering.
7. In case of covering filter with over coat,
conditions such as material of resin, cure
temperature, and so on should be evaluated well.
8. Accurate test circuit values are required to
measure electrical characteristics. It may be a
cause of miss-correlation if there is any deviation,
especially stray capacitance, from the test circuit
in the specification.
3. All kinds of re-flow soldering must not be applied
on the component.
4. Do not clean or wash the component as it is not
hermetically sealed.
5. Please contact Murata or Murata representative for
soldering condition, in case of using lead free
14
38
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Chip Type Packaging
■ Chip Type Minimum Quantity
3000 pcs./dia. 330mm Reel
500 pcs./Bag (TPWKA series only)
■ SFSKA/TPSKA Series
Dimensions of Reel
Dimensions of carrier tape
+0.1
–0.0
Part Number marked side is always facing upside.
2.0±0.1 4.0±0.1
ø1.5
Leader
Cover Film
Trailer
40-190
Empty Components
Empty
240-280 min.
2.2±0.5
400-560
+0.1
–0.0
Peeling strength
(20-60gr.)
4.3±0.1
ø1.5
8.0±0.1
Chip filter
3˚ max.
10˚ max.
Cover tape
ø13.0±0.2
17.5±1.5
21.5±0.5
User direction of feed
(in mm)
■ TPWKA Series
Dimensions of Reel
Dimensions of carrier tape
Part Number marked side is always facing upside.
+0.1
–0.0
ø1.5
2.0±0.1 4.0±0.1
Leader
Cover Film
Trailer
40-190
Empty Components
Empty
240-280 min.
2.2±0.5
400-560
+0.1
–0.0
The cover film peel
strength force 0.1—0.7N
Chip filter
5.5±0.1
8.0±0.1
ø1.5
3˚ max.
10˚ max.
Cover tape
ø13.0±0.2
17.5±1.5
21.5±0.5
User direction of feed
(in mm)
14
39
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Lead Type Packaging
■ Lead Type Minimum Quantity
Bulk
: 500 pcs.
Ammo Pack : 2000 pcs. (SFSRA/TPSRA series)
1500 pcs. (CDSRH/TPWRD/TPTRD series)
■ SFSRA/TPSRA Series
P2
P
∆h ∆h
∆S
M
M
D0
P1 F1 F2
P0
t
Direction Feed
Item
Code
L1
Dimensions
Tolerance
Remarks
Lead length under the hole down tape
Pitch of component
5.0 min.
12.7
P
±0.5
±0.2
±0.5
Tolerance for Pitches 10ZP0=127±1
Pitch of sprocket hole (I)
P0
12.7
Length from hole center to lead
P1
3.85
Length from hole center to
component center
P2
6.35
±0.5
Lead spacing (I)
F1
F2
2.5
2.5
±0.2
±0.2
±1.0
±1.0
±0.5
Lead spacing (II)
Slant to the forward or backward
Slant to the left or right
Width of carrier tape
∆h
∆S
W
0
0
18.0
6.0 min.
9.0
Width of hold down tape
Position of Sprocket hole
Gap of hold down tape and carrier Tape
W0
W1
W2
±0.5
+0.5
–0
0
Hold down tape doesn't exceed the carrier tape.
Distance between the center of
sprocket hole and lead stopper
H0
18.0
±0.5
Diameter of sprocket hole
Total tape thickness
D0
t
ø4.0
0.6
±0.2
±0.2
±1.5
Pitch of sprocket hole (II)
P020
254.0
The pitch of 20 sprocket holes
(in mm)
14
Continued on the following page.
40
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Lead Type Packaging
Continued from the preceding page.
■ TPSRD/CDSRH_EK Series
∆h ∆h
P2
P
∆S1
D0
P1
F
t
P0
Item
Code
L1
Dimensions
3.0 min.
12.7
Tolerance
———
±0.5
Remarks
Lead length under the hole down tape
Pitch of component
P
Pitch of sprocket hole (1)
Length from hole center to lead
P0
P1
P2
12.7
±0.2
3.85
±0.5
Length from hole center to component center
6.35
±0.5
+0.5
-0.2
Lead spacing
F
5.0
Slant to the forward or backward
Slant to the left or right
Width of carrier tape
∆h
∆S1
W
0
0
±1.0
±1.0
±0.5
———
±0.5
18.0
6.0 min.
9.0
Width of hold down tape
Position of sprocket hole
W0
W1
Gap of hold down tape and
Carrier tape
+0.5
-0.0
W2
H0
0
Hold down tape doesn't exceed the carrier tape
Distance between the center of
sprocket hole and lead stopper
18.0
±0.5
Diameter of sprocket hole
Total tape thickness
D0
t
ø4.0
0.6
±0.2
±0.2
±1.5
Pitch of sprocket hole (2)
Po20
254.0
The pitch of 20 sprocket holes
(in mm)
Continued on the following page.
14
41
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Lead Type Packaging
Continued from the preceding page.
■ TPSRD_W/TPWRD/TPTRD/CDSRH_CK Series
∆h ∆h
P2
P
∆S1
F1 F1
D0
P1
F
t
P0
Item
Code
L1
Dimensions
3.0 min.
2.0 max.
12.7
Tolerance
Remarks
Lead Length under the Hold Down Tape
Length of Cat off
L2
To distinguish the direction
Pitch of Components
P
±0.5
±0.2
±0.5
±0.5
Pitch of Sprocket Hole (1)
Length from Hole Center to Lead
P0
P1
P2
F
12.7
3.85
Length from Hole Center to Component Center
Pitch of the Terminal (1)
6.35
+0.5
5.0
–0.2
Pitch of the Terminal (2)
F1
2.5
±0.2
±1.0
±1.0
±0.5
Slant to the Forward or Backward
Slant to the Left or Right
∆h
∆S1
W
0
0
Width of Carrier Tape
18.0
Width of Hold Down Tape
W0
W1
W2
6.0 min.
9.0
Must not protrude to the carrier tape
Position of Sprocket Hole
±0.5
+0.5
–0
Gap of Hold Down Tape and Carrier Tape
0
Distance Between the Center of Sprocket
Hole and Lead Stpper
H0
18.0
±0.5
Diameter of Sprocket Hole
Total Tape Thickness
D0
t
ø4.0
0.6
±0.2
±0.2
±1.5
Pitch of Sprocket Hole (2)
P020
254.0
The pitch of 20 sprocket holes
(in mm)
14
42
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P25E3.pdf 01.10.17
Note:
1. Export Control
For customers outside Japan
<
>
Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive
weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons.
For customers in Japan
<
>
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
2. Please contact our sales representatives or product engineers before using our products listed in this catalog for the applications listed below which require
especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property, or when intending to use one
of our products for other applications than specified in this catalog.
q Aircraft equipment
w Aerospace equipment
e Undersea equipment
r Power plant equipment
t Medical equipment
y Transportation equipment (vehicles, trains, ships, etc.)
u Traffic signal equipment
i Disaster prevention / crime prevention equipment
o Data-processing equipment
! Application of similar complexity and/or reliability requirements to the applications listed in the above
3. Product specifications in this catalog are as of September 2001. They are subject to change or our products in it may be discontinued without advance notice.
Please check with our sales representatives or product engineers before your ordering. If there are any questions, please contact our sales representatives or
product engineers.
4. Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product
specification or to transact the approval sheet for product specification, before your ordering.
5. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or third party's intellectual property rights and other related rights in consideration of your using our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
6. None of ozone depleting substances (ODS) under the Montreal Protocol is used in manufacturing process of us.
http://www.murata.co.jp/products/
He a d O ffice
In te rn a tio n a l Divisio n
2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone:81-75-951-9111
3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone:81-3-5469-6123 Fax:81-3-5469-6155 E-mail:intl@murata.co.jp
相关型号:
©2020 ICPDF网 联系我们和版权申明