概述
规格参数
数据手册CPCI350D-1 概述
350W 6Ux8HP DC/DC CompactPCI Power Supply 350W 6Ux8HP DC / DC的CompactPCI电源 电源模块
CPCI350D-1 规格参数
| 生命周期： | Obsolete | 零件包装代码： | MODULE |
| 包装说明： | , | 针数： | 47 |
| Reach Compliance Code： | unknown | ECCN代码： | EAR99 |
| 风险等级： | 5.84 | Is Samacsys： | N |
| 模拟集成电路 - 其他类型： | DC-DC REGULATED POWER SUPPLY MODULE | 最大输入电压： | 72 V |
| 最小输入电压： | 36 V | 标称输入电压： | 48 V |
| JESD-30 代码： | R-XXMA-X47 | 长度： | 233.172 mm |
| 功能数量： | 1 | 输出次数： | 4 |
| 端子数量： | 47 | 最高工作温度： | 70 °C |
| 最低工作温度： | 最大输出电压： | 5.25 V | |
| 最小输出电压： | 4.75 V | 标称输出电压： | 5 V |
| 封装主体材料： | UNSPECIFIED | 封装形状： | RECTANGULAR |
| 封装形式： | MICROELECTRONIC ASSEMBLY | 认证状态： | Not Qualified |
| 表面贴装： | NO | 技术： | HYBRID |
| 温度等级： | COMMERCIAL | 端子形式： | UNSPECIFIED |
| 端子位置： | UNSPECIFIED | 最大总功率输出： | 350 W |
| 微调/可调输出： | NO | 宽度： | 169.6 mm |
| Base Number Matches： | 1 |
CPCI350D-1 数据手册
通过下载CPCI350D-1数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载cPCI350 SERIES
350W 6Ux8HP DC/DC CompactPCI™ Power Supply
OBSOLETE PRODUCT
Contact factory for replacement model
SELECTION GUIDE
Output Current
Model Number
Power
Production Status
5V
3.3V 12V -12V
CPCI350D-1
350W
350W
50A1 40A1 12A
50A1 40A1 12A
2A
2A
Consult Factory
No
CPCI350D-1C
Active
Yes
INPUT CHARACTERISTICS
Parameter
Conditions
Min
36
Typ
36
Max
Units
Vdc
Input Operating Voltage
Input Voltage Withstand
Inrush Current
72
75
34
Vdc
72Vdc input
Apk
FEATURES
OUTPUT CHARACTERISTICS
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
6Ux8HP package
Output
Nominal Voltage
Output Current
Total Regulation2
350W power at 0-50ºC
PICMG 2.11 Compliant
Widerange 36-72VDC Input Range
PCI Voltage Architecture
47-pin I/O Connector
No minimum load
Min
0A
Max
50A1
40A1
12A
2A
V1
+5.0Vdc
+3.3Vdc
+12Vdc
2ꢀ
2ꢀ
V2
0A
V3
0A
+4/-2ꢀ
V4
-12Vdc
0A
+4/-2ꢀ
Max
Parameter
Conditions
V1 & V2 only
Min
Typ
5
Units
ꢀVnom
ꢀ/ºC
mVp-p
mVp-p
W
Output Voltage Adjustment
Temperature Coefficient
PARD (V1 & V2)
PARD (V3 & V4)
Hot-swap capable
0.02
50
20MHz bandwidth
20MHz bandwidth
50ºC, 400lfm airflow
70ºC, 400lfm airflow
ΔV, 50ꢀ load step
Settling time
120
350
DESCRIPTION
0
0
The cPCI350 is
a high-reliability, 350W, 6Ux8HP
Output Power
CompactPCI™ power supply operating from widerange
48Vdc-input. Equipped with the 47-pin I/O connector
option, these units are fully compliant with the PICMG
2.11 R1.0 Power Interface Specification as well as the
underlying CompactPCI™ standards.
175
W
8
200
6.5
ꢀVnom
μsec
V
Transient Response
Output V1 (+5.0V)
Output V2 (+3.3V)
Output V3 (+12V)
Output V4 (-12V)
5.5
3.8
6.0
4.3
ORing diodes and active current sharing allow the
cPCI350 to be operated in N+n parallel-redundant
configurations to support high-availability (HA) telecom
applications.
4.8
V
Over-Voltage Protection3
13.0
13.5
14.0
-13.0
V
-14.0 -13.5
V
With a wide-range input of 36-72Vdc, safety agency
approvals to UL1950 and EN60950, EMI compliance
to ETSI and Telcordia standards, the cPCI350 was
designed with globally-deployed systems in mind.
Additional features include remote sense compensation,
unit enable control (EN#), output inhibit control (INH#),
output fault signal (FAL#), and thermal warning signal
(DEG#). LEDs are provided for visual indication of input
power presence and output fault condition.
Minimum Load
04
A
Remote Sense Compensation
V1, V2, & V3
V1-V3; full load
V4, full load
Pri-Sec
500
mV
10
40
ꢀItot
ꢀItot
kVac
kVac
Vac
Current Share Tolerance
4
Isolation
Pri-Chassis
Sec-Chassis
1.5
500
The proven design and complement of global safety
agency approvals provide for an advanced power
solution for your telecom CompactPCI requirements.
A thermal switch shuts down the power supply in the event that critical
temperatures are exceeded. Unit will automatically restart when
acceptable temperatures are restored.
Thermal Shutdown
Notes:
1. Combined currents from outputs V1 & V2 not to exceed 50A total.
2. Total regulation includes line, load, and cross regulation.
3. Response to an OVP fault is a latching shutdown,
restart of the unit requires cycling of the input power.
4. May not be in regulation.
www.murata-ps.com
cPCI350.A01 Page 1 of 6
cPCI350 SERIES
350W 6Ux8HP DC/DC CompactPCI™ Power Supply
GENERAL CHARACTERISTICS
Parameter
Efficiency
Conditions
Min
Typ
68
Max Units
48Vdc input, 350W load
ꢀ
Calculated per MIL-HDBK-217F, 25ºC ambient, ground benign
Calculated per MIL-HDBK-217F, 50ºC ambient, ground benign
Unpackaged
374
174
khrs
khrs
Kg
MTBF
Weight
0.7
PROTECTION
Inception
Max
Parameter
Conditions/Response
Min
Typ
90
Units
ºC
Thermal Shutdown
Input Protection
Automatic recovery upon restoration to operational temperatures
Internal line fuse, Littlefuse 314020 or equivalent (fast-acting 3AB)
All outputs
20
A
Over-Voltage Protection
110
125
145
ꢀVnom
Parameter
Conditions/Response
Outputs are individually protected against overloads and indefinite short circuit with automatic recovery upon removal of the
fault condition. Overload response for all outputs is hiccup mode.
Output Overload Protection
Design Verification Testing (DVT) confirms that voltage excursions on the output buses resulting from insertion/extraction events
do not exceed the specified maximum of 8ꢀ. However, routing of power and signal lines in the mating backplane is critical to
minimization of such excursions. In addition, performance can be critically affected by load characteristics including resistance,
negative resistance, and reactive components. While the control loop responses have been designed for optimum hot-swap
performance over a wide range of characteristics, there may be instances where the voltage excursions exceed published
specifications. In such cases, the control loop responses can be modified to perform optimally.
Hot-Swap Capability
Output Fault Isolation
Output isolation devices are present in all outputs to isolate faults within a failed power supply.
STATUS & CONTROL SIGNALS & INDICATORS
Name
Description
Short pin (#27) on connector will enable the outputs when the mating pin is grounded. Supply will not power up until this pin is engaged to
its mate in the backplane. Unit output will be inhibited as pin is disengaged from the mating connector.
Enable (EN#)
Output Inhibit (INH#)
Output Fault (FAL#)
Secondary referenced; active low, TTL compatible. Logic “0” or short circuit to output return inhibits all outputs.
Secondary referenced. Open collector signal denotes that one of the output voltages has fallen below the lower regulation limit.
Connection of the sense leads across the load at the desired point of regulation will compensate for voltage distribution drops up to 300mV
between the output terminals of the power supply and the point of connection. The unit reverts to local sensing if the sense lines are opened
for any reason. The output is protected against shorted or open leads. Applies to outputs V1-V3.
Remote Sense (RS+, RS-)
Thermal Warning (DEG#)
Fault Indicator LED
Secondary referenced; TTL compatible. Open collector denotes a thermal warning; nominally, 10ºC prior to thermal shutdown.
An LED will illuminate red if the output voltages are not within specification, coincident with assertion of the FAL# signal.
A green LED will be illuminated when the input voltage is present and above the minimum requirement.
Power Present Indicator LED
www.murata-ps.com
cPCI350.A01 Page 2 of 6
cPCI350 SERIES
350W 6Ux8HP DC/DC CompactPCI™ Power Supply
ENVIRONMENTAL CHARACTERISTICS
Parameter
Conditions
Min Typ
0
Max
70
Units
ºC
Ambient OperatingTemperature
400lfm of airflow is required to maintain full output power at 0 to 50ºC ambient. De-rate to 175W at 70ºC.
At 200lfm and 50ºC ambient, output power is de-rated to 175W.
Ambient Storage Temperature
Over-Temperature Protection
-20
85
ºC
Unit is protected against thermal overloead. Output will automatically restore upon recovery to acceptable temperatures.
Operating; non-condensing
10
5
90
ꢀ
ꢀ
ft
Humidity
Altitude
Storage; non-condensing
90
Operating. De-rate operating ambient temperature by 2Cº per 1000ft above 5000ft.
Storage
-200
-200
10000
50000
ft
ELECTROMAGNETIC COMPATIBILITY (EMC)
Characteristic
Compliance
Conducted Emissions
NEBS GR-1089
CERTIFICATIONS
Agency/Characteristic
Standard
UL
UL1950
CSA
CSA950 (per cUL)
EN60950
VDE
CE
LVD Directive; self-certified
RoHS
SELV
Vibration
Shock
EN Directive 2002/95/EC; self-certified; see Selection Guide table for specific model compliance
Self-certified
MIL-STD-810d, Method 514.3, Procedure 1
MIL-STD-810d, Method 516.3, Procedure 1
SAFETY AGENCY RATINGS
Input Voltage
Input Current
Input Power
48Vdc
15Adc
650W
www.murata-ps.com
cPCI350.A01 Page 3 of 6
cPCI350 SERIES
350W 6Ux8HP DC/DC CompactPCI™ Power Supply
PACKAGE SPECIFICATIONS
All measurements are in inches.
Weight: 0.7kg
Shock: MIL-STD-810d, Method 516.3, Procedure 1.
Vibration: MIL-STD-810d, Method 514.3, Procedure 1.
Dimensions; 6U x 8 HP x 160mm.
www.murata-ps.com
cPCI350.A01 Page 4 of 6
cPCI350 SERIES
350W 6Ux8HP DC/DC CompactPCI™ Power Supply
PACKAGE SPECIFICATIONS (Continued)
CONNECTORS
Pin #1
1-4
5-12
13-18
19
Staging2 Signal Name
Description
M
M
M
M
M
M
M
M
M
M
M
S
V1
V1 Output
RTN
V1 and V2 Return
V2 Output
V2
RTN
V3 Return
20
V3
V3 Output
21
V4
V4 Output
22
RTN
RESERVED3
Signal Return
Reserved3
23
24
RTN
V4 Return
25
GA04
RESERVED
EN#
Geographic Address Bit 0
Reserved
26
27
Enable
28
M
M
M
M
GA14
V1ADJ4
V1 SENSE
GA24
Geographic Address Bit 1
V1 Adjust
29
30
V1 Remote Sense
Geographic Address Bit 2
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
M
M
M
M
M
M
M
M
M
M
M
M
M
L
V2ADJ4
V2 Adjust
V2 SENSE
S RTN
V2 Remote Sense
Sense Return
V1 SHARE
V3 SENSE
IPMB SCL4
DEG#
V1 Current Share
V3 Remote Sense
Serial Communication Receive; Clock
Degrade Signal
INH#
Inhibit
IPMB SDA4
V2 SHARE
FAL#
IPMB PWR4
V3 SHARE
CGND
Serial Communication Transmit; Data
V2 Current Share
Fail Signal
System Management Power
V3 Current Share
Notes: 1. Pin numbers correspond to the female backplane connector.
2. L = Long Length Pin (First Make, Last Break); M = Medium Length Pins;
S = Short Length Pins (Last Make, First Break).
3. PICMG™ 2.11 has reserved Pin 23 for future designation -- the cPCI350
uses this pin for synchronous start, required when N>1 for N+1 redundant
configurations.
Chassis Ground (safety ground)
AC Input Neutral / +DC Input
AC Input Line / -DC Input
M
M
ACN/+DC IN
ACL/-DC IN
4. This function not available in the cPCI350DC.
RoHS COMPLIANT INFORMATION
This series is compatible with RoHS soldering
systems with a peak wave solder temperature
of 300ºC for 10 seconds. The pin termination
finish on this product series is Tin Plate, Hot
Dipped over Matte Tin with Nickel Preplate.
The series is backward compatible with Sn/Pb
soldering systems.
ISO9001
For further information, please visit www.murata-ps.com/rohs
CERTIFIED
www.murata-ps.com
cPCI350.A01 Page 5 of 6
cPCI350 SERIES
350W 6Ux8HP DC/DC CompactPCI™ Power Supply
USA:
Mansfield (MA), Tel: (508) 339-3000, email: sales@murata-ps.com
Toronto, Tel: (866) 740-1232, email: toronto@murata-ps.com
Canada:
UK:
Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com
Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com
München, Tel: +49 (0)89-544334-0, email: munich@murata-ps.com
Murata Power Solutions, Inc.
France:
Germany:
Japan:
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356
www.murata-ps.com email: sales@murata-ps.com ISO 9001 REGISTERED
Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com
Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com
01/15/09
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
China:
Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com
Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com
notice.
© 2009 Murata Power Solutions, Inc.
Singapore: Parkway Centre, Tel: +65 6348 9096, email: singapore@murata-ps.com
www.murata-ps.com
cPCI350.A01 Page 6 of 6
CPCI350D-1 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| CPCI350D-1C | MURATA | 350W 6Ux8HP DC/DC CompactPCI Power Supply | 获取价格 |
|
| CPCI350DC | CANDD | Compact PCI SERIES | 获取价格 |
|
| CPCI420D-1 | MURATA | 420W 6Ux8HP DC/DC CompactPCI Power Supply | 获取价格 |
|
| CPCI420D-1C | MURATA | 420W 6Ux8HP DC/DC CompactPCI Power Supply | 获取价格 |
|
| CPCI420DC | CANDD | 420 Watt, 6U x 8HP, CompactPCI | 获取价格 |
|
| CPCI47P52C101 | WINCHESTER | PCMCIA Connector, 47 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal | 获取价格 |
|
| CPCI47P52C106 | WINCHESTER | PCMCIA Connector, 33 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal | 获取价格 |
|
| CPCI47P52C116 | WINCHESTER | PCMCIA Connector, 43 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal | 获取价格 |
|
| CPCI47P52D106 | WINCHESTER | PCMCIA Connector, 33 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal | 获取价格 |
|
| CPCI47P52D110 | WINCHESTER | PCMCIA Connector, 37 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal | 获取价格 |
|
CPCI350D-1 相关文章
Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
- 2024-09-20
- 6
Bourns 精密环境传感器产品选型手册(英文版)
- 2024-09-20
- 9
Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
- 2024-09-20
- 8
Bourns GMOV 混合过压保护组件产品选型手册(英文版)
- 2024-09-20
- 6
